from

$30.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$30.48

Stant locking gas caps are OEM quality both in construction and materials as well as deterrent to fuel theft and vandalism. A gas/fuel cap performs three very important functions; safety of the vehicle’s occupants, fuel economy and reduce emissions. Safety: Without a fuel cap, gasoline vapors will be present around your car at all times. Those vapors can be ignited by a random spark or flame and are very dangerous if you are involved in an accident or rollover. Fuel Economy: According to Sun Oil Company research, a vehicle with a missing or inoperative fuel cap will allow 176 pounds (22 gallons) of gasoline to evaporate over the period of one year. Emissions: Gasoline vapors emit hydrocarbons which dissolve the earth’s ozone layer and cause smog.

Product Features:

A quality locking mechanism deters fuel theft and vandalism
Original equipment performance and safety standards
OEM quality construction and materials
Replacing an old, leaky or missing gas cap can save as much as a gallon of gas every 15 days
A new gas cap can pay for itself in less than three months.

from

$450.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$23.46

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$60.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$122.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$81.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$65.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$61.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$64.99

Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:

Solid-state Worry Free Electronics
Internal Pressure Regulating
Universal Design Allows For Easy Installation
No DiaphraGMs Or Mechanical Parts To Wear Out
They Make An Excellent Fuel Transfer or Booster Pump
Not designed for use on aircraft of any type.
Hose Barbs Fit 5/16″ Fuel Hose
Self-priming, 2 wire design
Eliminates vapor lock and flooding

from

$14.49

Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$127.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$37.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$119.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Fuel Injection Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper operating pressures of the vehicle’s injection system.
The Fuel Injection Pressure Sensor reports the fuel rail pressure to the PCM for optimal engine operation under all operating conditions.

from

$4.29

Product Features:

Premium OE quality materials

from

$8.61

Fuel Injector O-Ring

from

$23.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$63.99

REGULATOR-WINDW

from

$4.31

MAHLE Original gaskets provide world class sealing products trusted by OEM’s and Technicians around the globe. All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.

Product Features:

Meets or exceeds all original equipment specifications
Application-specific design ensures a perfect fit
MAHLE Original gaskets is the leader in Domestic, Asian and European applications

from

$20.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$32.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.49

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$40.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.