2003 BMW M3 Cooling and Climate Controls
More 2003 BMW M3 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2003 BMW M3, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2003 BMW M3 Cooling and Climate Controls
APA/URO Parts – Heater Valve (Part No.R3020275136APA)
from
$413.62
Heater Valve
Geba – Geba Water Pump (Part No.G3000458068GEB)
from
$184.62
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High quality cast aluminum.
- Advanced bearing design for high axial and radial stresses.
- Unitized sealing technology that ensures optimal leak tightness and longevity.
- Optimum cooling performance and longevity.
Elring – Water Pipe O-Ring (Part No.G2026551372ELR)
from
$1.60
Water Pipe O-Ring
Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56800)
from
$165.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1104)
from
$176.99
Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.
Product Features:
See More
Product Features:
- Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Programa – HVAC Control Module (Part No.R2059178465PRO)
from
$401.51
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:
Product Features:
See More
Product Features:
- Complete visual inspection.
- Boards and components are repaired or replaced.
- Any test that fails to meet OEM specifications is repaired or replaced.
- Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
FAE – Twin Connection Swit (Part No.C607075284FAE)
from
$28.97
Twin Connection Swit
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)
from
$33.52
ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor
See More
Carquest Premium – Heater Core (Part No.910535)
from
$142.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)
from
$54.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
APA/URO Parts – Coolant Bleed Screw (Part No.G203275972APA)
from
$2.79
Coolant Bleed Screw
APA/URO Parts – Radiator Mount (Part No.G102075950APA)
from
$2.76
Radiator Mount
APA/URO Parts – Engine Cooling Fan Blade (Part No.G505028207APA)
from
$62.33
The APA/URO Engine Cooling Fan Blade is designed for specific vehicle fit, form, and function providing quiet dependable operation and longer service life.
Product Features:
See More
Product Features:
- Manufactured and tested to OEM specifications
- Precision assembled and balanced with all NEW components for vibration free operation
- OE Design and Technology insures ease of installation right out of the box
- Manufactured in ISO and TS Certified facilities
Motorad – Standard Thermostat: 174 Degrees (Part No.405-174)
from
$36.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Vaico – Fan Shroud Rivet (Part No.G502575975VCO)
from
$1.27
Fan Shroud Rivet
APA/URO Parts – ABS Modulator Insula (Part No.N6055823595APA)
from
$2.58
ABS Modulator Insula
Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.621-584)
from
$75.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.
Product Features:
See More
Product Features:
- Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
Stant – SEAL THERMOSTAT (Part No.27271)
from
$1.29
SEAL THERMOSTAT
KAI – A/C System Seal Kit (Part No.FTT010073)
from
$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine
Product Features:
See More
Product Features:
- MT2640, L4 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Motorad – Radiator Cap: 30 PSI (Part No.T-65)
from
$29.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)
from
$34.67
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – A/C Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56196)
from
$47.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
APA/URO Parts – Water Pipe O-Ring (Part No.G2026248503APA)
from
$4.35
Water Pipe O-Ring
Elring – Air Temp Sensor O-Ring (Part No.C6005405869ELR)
from
$3.51
Air Temp Sensor O-Ring
Popular 2003 BMW M3 Cooling and Climate Controls Categories
2003 BMW M3 Cooling and Climate Controls
You count on your 2003 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 86 Cooling and Climate Controls ranging in price from $1.22 to $678.99, you’re sure to find everything you need for your 2003 BMW M3.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 27 different brands like Permatex, Imperial, and Carquest Premium. 2003 BMW M3 Cooling and Climate Controls start as low as $1.22!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 439 extensive product reviews on 2003 BMW M3 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 30 PSI with 4.1 stars and Thermostatic Fan Control – Preset with 3.0 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2003 BMW M3 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2003 BMW M3
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 BMW M3 running right for years to come. In our inventory you’ll find brands like Permatex, Imperial, Carquest Premium, and even more.
Popular ACM Cooling and Climate Controls
You’ll find popular ACM brand products across Air Conditioning Parts. All are waiting to get your 2003 BMW M3 back on the road. Some of the top-rated ACM products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2003 BMW M3, and some of our most reviewed Permatex parts include:
FAQs for 2003 BMW M3 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2003 BMW M3?
Out of 86 Cooling and Climate Controls for the 2003 BMW M3, the most popular in our inventory are:
What are the top-rated 2003 BMW M3 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 2003 BMW M3 based on customer reviews/ratings are:
