2002 Nissan Altima Cooling and Climate Controls

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

• Machined metal construction
• Works with MT-300 pressure tester
• Tests coolant caps
• Professional quality

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

• Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
• Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
• Restores functionality – made to perform like original equipment to restore full HVAC operation
• Trustworthy quality – backed by team of engineers and quality specialists in the USA

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

• MT2909
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Original Equipment Air Conditioning Compressor Clutch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Do the job right while satisfying the warranty requirements with all new components in a single box with our new prepackaged A/C kits! Each kit comes with a new compressor, accumulator or filter drier, expansion device, oil, and required gaskets and O-rings, all in a single box. These components are designed to meet or exceed OE specifications. Factory Air A/C Kits feature brand new compressors that have been 100% vacuum and leak tested to ensure a long-lasting repair. Factory Air A/C Replacement Kits include Compressor, Accumulator/Receiver Drier, Expansion Device/Orifice Tube, Oil, and Required Gaskets or O-rings.

Product Features:

• Designed to meet or exceed OE specifications
• 100% vacuum and leak tested
• Limited Lifetime Warranty

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

A/C Pressure Switch

METRIX heater cores are manufactured to OE specifications and provide reliable, efficient performance. METRIX heater cores are manufactured from high quality aluminum or copper and feature high-strength brazed joints to ensure a highly durable, long-lasting product.

Product Features:

• OE-Quality – Exact Fit
• Aluminum or copper tubes, air centers and tanks
• Includes the required o-rings and associated hardware
• High strength brazed joints
• Designed and manufactured to OE specifications.
• Includes seals and/or O-Rings (when required)

New CAPA Certified Standard Replacement Passenger Side Upper Radiator Support

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Water Temperature Sender

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

• Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
• Durable components – this bypass pulley uses quality components for a long service life
• Easy to install – uses the same mounting points as the A/C compressor
• Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

• 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
• Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
• Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
• Welds and crimps meet and exceed original equipment tension specifications.
• Manufactured to allow flexibility in the hose to conform to engine compartments.
• O-Rings necessary for installation are included.
• O-Rings necessary for installation are included.

DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit® philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:

• Fin Pitch – Superior fin waves provide a higher heat transfer.
• Flow Configuration – Available in cross-flow and down-flow configurations.
• Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 1 minute

Water Pump Gasket

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

• OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
• FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
• THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

• This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
• This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
• The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
• Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
• Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
• Our condensers are manufactured from rigid design standards to fit OEM dimensions.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
• Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• vibration testing
• blast testing
• and salt spray testing to simulate real world conditions.

The Original Equipment expansion tank hose is the same OEM quality and performance of the original equipment it replaces and is supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OEM-Equivalent
• Inner linings are resistant to electrochemical cracking
• High strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 125°C

The Original Equipment brand ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. The Original Equipment brand ABS speed sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE quality direct fit application
• Manufactured to meet or exceed OE requirements and testing
• Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

• Direct replacement – this engine coolant reservoir matches the fit and function of the original part
• Ideal solution – engineered for a seamless installation
• Durable construction – manufactured from quality materials to withstand underhood heat and vibration
• Trustworthy design – backed by 100 years of automotive aftermarket experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

• Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
• All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
• All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

Four Seasons manufactures a high quality replacement Blower Motor that meets or exceeds OE design and performance.

Product Features:

• OE-Equivalent.
• Direct Fit Replacement.
• Meet or exceed OE design and performance.
• Magnet size and properties compare to or exceed OEM.
• Manufacturing facility both QS9000 and ISO 9000 certified.
• OE quality electrical components, brushes and bearings.
• Balanced rotor assembly.

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

• Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
• Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
• Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
• Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings