Name: Car Top Duffle Bag
Brand: Rightline Gear
SKU: 100D90
Price: 99.99 USD

from

$99.99

The Rightline Gear Car Top Duffle Bag is a 100% waterproof gear bag that you can pack, strap to the roof of your vehicle, transport, and then carry wherever you need to go. Attach (1) to (4) Duffle Bags to vehicles WITH or WITHOUT a roof rack. Each bag comes with a removable shoulder strap that can be stored in the bag’s zippered side pocket when not in use. The bag is made from tough PVC Coated Mesh that is re-enforced for strength and UV protected. The Car Top Duffle Bag defines travelling efficiency!

Product Features:

Capacity: 4.3 cu ft
Dimensions: 36″ L x 16″ W x 13″ H
100% Waterproof with welded seams, urethane coated zippers, and a hook-&-loop-close zipper cover
Designed to be used on any size vehicle, WITH or WITHOUT a roof rack
Includes: bag, shoulder strap, (2) attachment straps, (4) Car Clips, and set up guide
Includes: duffle bag, (2) nylon straps, (4) Car Clips, and complete set up guide

from

$39.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$209.99

Need a new keyless remote? This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
Matches features – this 4-button remote control features lock, unlock, panic, and trunk release functions; includes blank key that can be cut to match your original
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

from

$165.99

This keyless entry remote is designed to match the appearance and function of the original key fob on specified vehicles, providing a nearly identical replacement or spare transmitter. It requires programming with a compatible scan tool to be paired with

Product Features:

Direct replacement – this keyless entry remote is designed to match the function of the original key fob on specified vehicles.
Programming required – a compatible scan tool is required to properly pair this remote; setup by a qualified professional is recommended
Durable construction – made from quality materials and components to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$129.99

Pants Saver Custom Fit 4pc Car floor Mat Set for Lexus GS GENERATION 2006 ,Gray : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Lexus GS GENERATION 2006 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
Odorless and suitable for All Weather. Proudly Made In North America
Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$79.99

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

Easily installed and removed – no tools required
Designed to fit your specific vehicle contours
Raised ridges confines dirt and water to keep your vehicles carpet clean
Anti-skid spikes on back of mats prevent the mat from slipping

from

$129.99

Pants Saver Custom Fit 4pc Car floor Mat Set for Lexus GS GENERATION 2006 ,Tan : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Lexus GS GENERATION 2006 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
Odorless and suitable for All Weather. Proudly Made In North America
Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$49.99

New Standard Replacement Undercar Shield, RWD

Product Features:

RWD, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

New Standard Replacement Undercar Shield

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.49

Needing a new key? We’ve got you covered! This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard. If the car’s receiver recognizes the code, it will allow the car to start. This specific key holds a Texas 4C transponder chip. This key also has a high security blade, a preventive measure against ignition picking and key duplication. Cutting and origination services for this key will need to be performed with a special laser cutting machine.

Product Features:

Replacement Key with Texas 4C Transponder Chip
Contains a transponder chip for enhanced security
Key blade ready for cutting and pairing

from

$457.99

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

A favorite amongst car enthusiasts
Flannel lined for an ultra-soft, paint-friendly cover
Constructed from all cotton based materials
Our ‘classic’ indoor cover

from

$744.99

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$99.99

Autocraft ALUMISOFT 4 layers car cover is designed for all-weather conditions. With the maximum Heat & Sun Reflective Technology, it will reflect UV rays to keep your vehicle cool in the hot day and prevent your car’s interior and exterior from sun damage. Also, 100% water resistant protection while features breathable side panels to keep from moisture build-up. The extra soft inner lining offers added protection against scratches on the car paint. The cover is designed with a full elastic, double stitched hem, and reinforced grommets to ensure a better and secure fit. Include four built-in hook and loop straps on corners for extra security against wind gusts. Bag included for convenient storage.

Product Features:

Fits sedans up to 16ft 8in (5.1m)
4 layer premium car cover for ultimate protection in all-weather conditions
UV coated design provides maximum protection from sun and reflects heat to keep vehicle cooler
100% water resistant protection
Breathable side panel material prevents moisture build-up
Soft inner layer prevents scratches
Reinforced elastic hem provides snug fit grip around complete vehicle
Kit includes storage bag and antenna patch
Two reinforced grommets with tie cord and four hook and loop straps on corners for added security against wind gusts

from

$744.99

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$265.99

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

Good basic indoor protection
Drill weave Polycotton blend
Resists tears and punctures
Treated to resist rot and mildew

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$89.99

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

Dimensions: 36″ L x 32″ W x 15″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
Weatherproof + with welded seams and a urethane coated zipper
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$25.99

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

from

$19.99

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.