2002 GMC C3500HD Transmission Parts

Below you will find various in-demand GMC Transmission Parts, components and accessories for your 2002 C3500HD. Advance Auto Parts has popular C3500HD parts like Transmission Mounts, Automatic Transmission Parts, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other C3500HD model years including 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and more. Select a category of 2002 GMC C3500HD Transmission Parts below and start saving instantly.

Popular 2002 GMC C3500HD Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Manual Transmission Differential Bearings

Torque Converter Hardware

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Shift Interlock Solenoids

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Line Assemblies

Automatic Transmission Oil Pump Seals

Neutral Safety Switch Connectors

Transmission Drain Plugs

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Back Up Light Relays

Back Up Light Switch Connectors

Manual Transmission Output Shaft Seals

Miscellaneous Automatic Transmission Seals

Input Shaft Bearings

Back Up Lamp Connectors

Automatic Transmission Seals

Manual Transmission Shift Fork Inserts

Remanufactured Automatic Transmissions

Torque Converter Bearings

Essential Transmission Parts for 2002 GMC C3500HDs

from

$13.99

AT OIL PAN GASKET

from

$6.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$35.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$79.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$92.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$441.99

AT MASTER REPAIR KIT

from

$36.99

REUSABLE AT PAN GSKT

from

$37.49

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

All parts are calibrated and tested to match the OE part
Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$14.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
Oil impregnated for extended life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.99

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models.
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$36.49

CONE

from

$85.99

GM Genuine Parts Parking / Neutral Position and Back Up Light Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$39.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.

from

$85.99

AT CONTR SOLENOID

from

$6.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$48.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Robust design and high grade materials meet the stringent demands of today’s service professional
Our switches are manufactured under a completely quality control process from componentry to finished products by experienced professional

from

$109.99

Transmission pressure control solenoids are computer controlled oil flow control valves used to apply pressure to automatic transmission clutch packs. All control solenoids meet or exceed original equipment design and quality specifications.

from

$80.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$171.71

AT Selector Cable

from

$30.49

SHAFT SEAL

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$13.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$429.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$83.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$14.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.49

Product Features:

Brand may vary by location

from

$12.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

Upgrade your 2002 GMC C3500HD with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2002 GMC C3500HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Transmission Parts are key to keeping your C3500HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 95 Transmission Parts for the 2002 GMC C3500HD, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2002 GMC C3500HD at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $2,534.99, with an average price of $271.75. Our 95 Transmission Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 2002 GMC C3500HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 GMC C3500HD, we stock popular OEM and aftermarket Transmission Parts from top names like Imperial, Dorman, National, and more. Imperial Transmission Parts start at just $14.79 and boast an impressive 4 stars average rating from customers. Dorman and National also bring quality to the table, with Transmission Parts available starting at $6.99, and at an average 4 stars rating. With 287 customer reviews and counting, our 2002 GMC C3500HD Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 GMC C3500HD is always ready to roll. We’re committed to providing you with everything you need to keep your C3500HD in top shape, all in one place. Start shopping confidently below for your 2002 GMC C3500HD!

Best-Selling Transmission Mounts for 2002 GMC C3500HDs

Enhance the driving experience in your GMC with 1 quality Transmission Mount components, starting at $17.29.

show more show less

from

$17.29

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 94-02; GMC 94-03; PONT 94-97;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2003
Weight approx: 2 Lbs
MATERIAL: RUBBER, STEEL
HEIGHT: 1.86 INCH / 47.24 MM
STUD: M10x1.5 1.15 INCH / 29.21 MM

Most Popular 2002 GMC C3500HD Automatic Transmission Parts

Customize your GMC with 15 Automatic Transmission Parts products like Transmission Solenoids, Transmission Bushings, and Automatic Transmission Line Assemblies, all priced under $2,534.99.

show more show less

from

$92.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.29

This clutch pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pedal bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

OE Replacement

from

$148.99

ATHARNESS VSS REPR

from

$85.99

AT CONTR SOLENOID

from

$35.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$48.99

AT/HARNESS VSS REPR

from

$2534.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2534.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2453.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2399.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2371.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2371.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2371.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2069.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

Top Picks for 2002 GMC C3500HD Transmission Seals

Upgrade GMC C3500HDs with top-quality Transmission Seals parts, including 10 OEM and aftermarket selections for your 2002 model.

show more show less

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$1.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$2.49

Product Features:

Brand may vary by location

from

$27.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$30.49

SHAFT SEAL

from

$14.99

AT OIL PUMP SEAL

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.49

SHAFT SEAL

In-Demand Automatic Transmission Pan and Gaskets for 2002 GMC C3500HDs

Select from 6 premium Automatic Transmission Pan and Gaskets parts for your 2002 GMC C3500HD, with prices ranging from $7.29 to $96.96.

show more show less

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$79.99

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$36.99

REUSABLE AT PAN GSKT

from

$7.29

AT OIL PAN GASKET

from

$96.96

AT Pan Gasket

from

$27.20

AT Pan Gasket

Most Sold 2002 GMC C3500HD Transmission Cooler and Parts

Explore our best-selling GMC parts for the 2002 C3500HD among 10 OEM and aftermarket options starting from $44.99.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$145.99

Oil cooler 1-1/2″ x 12″ x 15-1/8″. Extra heavy-duty. Designed for severe-duty transmission oil cooling applications.

Product Features:

Imperial Econo-Kool® tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.

from

$44.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top-Rated Transmission Parts Brands For Your 2002 GMC C3500HD

Shop for the best-rated brands offering Transmission Parts and other products for your 2002 GMC C3500HDs. Below you’ll find some of our best rated Transmission Parts from Imperial, Dorman, and National, and more. Transmission Parts from these brands that fit a 2002 C3500HD start at just $6.99 and are rated as high as 4 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2002 GMC C3500HD Transmission Parts

When it comes to maintaining or upgrading your 2002 GMC C3500HD, using quality Transmission Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Transmission Parts, specifically designed for the 2002 GMC C3500HD. With over 10 Imperial brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.79, with an average price of just $76.57. Plus, with over 115 customer reviews and an average rating of 4 stars, you can trust that our Imperial Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$145.99

This product is not rated

Transmission Oil Cooler

“”

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

from
$65.99

This product is not rated

Econo-Kool® Transmission Oil Cooler

“”

Popular Dorman 2002 GMC C3500HD Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2002 GMC C3500HD owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2002 C3500HD, Advance Auto Parts carries a full inventory of 14 Dorman Transmission Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dorman Transmission Parts range from $8.99 to $95.99, plus, with more than 19 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$12.49

This product is not rated

Transmission Line Connector With 3/8 Tube X 3/8-18In. Thread

“”

from
$9.49

This product is not rated

Torque Convertor Bolts

“”

from
$95.99

This product is not rated

Gearshift Control Cable Assembly

“”

FAQs for 2002 GMC C3500HD Transmission Parts

Which Transmission Parts are best-sellers for 2002 GMC C3500HDs?

Out of 95 Transmission Parts that fit 2002 GMC C3500HDs, the following parts are the top sellers:

Neutral Safety Switch (19970175) – $48.05
Torque Convertor Bolts (11839775) – $9.49
Transmission Line Connector With 3/8 Tube X 1/4-18 In. Thread (9110042) – $8.99

What’s the price range for 2002 GMC C3500HD Transmission Parts?

Transmission Part prices for the 2002 GMC C3500HD start at $1.99 and go up to $2,534.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2002 GMC C3500HD?

The average price for Transmission Parts for the 2002 GMC C3500HD is $271.75. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other GMC C3500HD model years?

Yes, we currently carry Transmission Parts for 11 model years of GMC C3500HDs between 1991 and 2001. Transmission Parts are bought most frequently for the following model years: 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Transmission Parts for my 2002 GMC C3500HD?

The cheapest 2002 GMC C3500HD Transmission Parts we carry in stock are:

Oil Seal (5440998) – $1.99
Auto Transmission Shift Shaft Seal (11407786) – $2.49
ManTranSynchroSpring (12009332) – $3.99
Shift Fork Insert (12009733) – $3.99
ManTrans Synchro Key (12009308) – $3.99

What are the top-rated Transmission Parts that fit the 2002 GMC C3500HD?

Out of 287 reviews by customers, our 2002 GMC C3500HD Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2002 GMC C3500HD and their top-rated products:

Transmission Bearings
- Bearings (5052505) – $14.79
- Bearings (3277259) – $6.99
- Taper Bearing Cone (3277410) – $17.99
Automatic Transmission Pan and Gaskets
- Bearings (5052505) – $14.79
- Bearings (3277259) – $6.99
- Taper Bearing Cone (3277410) – $17.99
Transmission Connectors
- Bearings (5052505) – $14.79
- Bearings (3277259) – $6.99
- Taper Bearing Cone (3277410) – $17.99

What types of Transmission Parts do you sell for my 2002 GMC C3500HD?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2002 GMC C3500HD:

Can I get help with 2002 GMC C3500HD Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Transmission Parts and more.

What is your return policy for GMC C3500HD Transmission Parts?

Advance Auto Parts keeps returns simple. For new GMC C3500HD Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 GMC C3500HD Transmission Parts

ATP – AT OIL PAN GASKET (Part No.SG-30)

National – Multi Purpose Seal (Part No.8792S)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-106)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 13.5 Quart (Part No.265-810)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-975)

ATP – AT MASTER REPAIR KIT (Part No.JM-22)

ATP – REUSABLE AT PAN GSKT (Part No.JG-142)

Delphi – Vehicle Speed Sensor (Part No.SS10309)

National – Bearings (Part No.PB-656-HD)

Dorman – Transmission Drain Plug – M12-1.75 Pilot Point (Part No.090-208CD)

FAG US – CONE (Part No.K387-A)

GM Genuine Parts – Park/Neutral Position and Back-Up Lamp Switch (Part No.D2263C)

NTK – ABS Wheel Speed Sensor (Part No.AU0137)

ATP – AT CONTR SOLENOID (Part No.JE-53)

National – Bearings (Part No.LM102910)

Carquest – Neutral Safety Switch (Part No.S9171)

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.SBA4929)

Carquest Premium – Neutral Safety Switch Connector (Part No.PTA1121)

ACDelco – AT Selector Cable (Part No.J4040577026ACD)

FAG US – SHAFT SEAL (Part No.SS2938)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

National – Multi Purpose Seal (Part No.410085)

B & M – Tork Master 2400 (Part No.70418)

Carquest – Neutral Safety Switch Connector (Part No.PT5665)

National – Bearings (Part No.M802011)

Driveworks – Tapered Roller Bearing (Part No.S-M-802011)

National – Multi Purpose Seal (Part No.4528N)

National – Multi Purpose Seal (Part No.4583)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2817)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-975)

Dorman – Help – Clutch Pedal Linkage Bushing (Part No.74014)

Pro-King – Automatic Transmission Solenoid (Part No.52-0211)

ATP – ATHARNESS VSS REPR (Part No.JE-22)

ATP – AT CONTR SOLENOID (Part No.JE-53)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-104)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L80E8101W)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L80E8101T2)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L80E6501T2)

Spartan – Automatic Transmission Assembly; GM 4 X 2 4L80E 4-Spd (Part No.1658A-81)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281142)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281159)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281158)

Moveras – 4L80E – Automatic Transmission (Part No.M00270AB)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-9449)

National – Multi Purpose Seal (Part No.5208)

National – Multi Purpose Seal (Part No.714598)

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

National – Multi Purpose Seal (Part No.2457)

FAG US – SHAFT SEAL (Part No.SS2938)

ATP – AT OIL PUMP SEAL (Part No.JO-122)

National – Multi Purpose Seal (Part No.714654)

FAG US – SHAFT SEAL (Part No.SS2114)

Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18698)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 13.5 Quart (Part No.265-810)

ATP – REUSABLE AT PAN GSKT (Part No.JG-142)

ATP – AT OIL PAN GASKET (Part No.JG-107)

ACDelco – AT Pan Gasket (Part No.J5040577055ACD)

Mahle – AT Pan Gasket (Part No.J5040577055MAH)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)

Imperial – Transmission Oil Cooler (Part No.241015)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-137)