2002 Ford Mustang Performance Ignition Products
More 2002 Ford Mustang Performance Ignition Products
Find your specific 2002 Ford Mustang original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2002 Ford Mustang Performance Ignition Products
MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)
from
$117.99
Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.
Product Features:
See More
Product Features:
- Designed to use w/late model Ford waste spark ignition systems
- 83:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Secondary towers designed for snap on spark plug terminals
- Primary terminals require Ford style connector
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
MSD Ignition – Coils; Ford 4.6/5.4L 4-Valve 99-14 8-Pack (Part No.82448)
from
$320.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 1999-2004 4.6L/5.4L DOHC 4V
- Factory replacement
- Direct bolt-in to factory connectors
- Produces higher voltage and spark energy
- CARB approved legal for use in all states
- Comes in an package of 8
MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)
from
$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Factory replacement coil
MSD Ignition – Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack (Part No.82428)
from
$259.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 1999-2004 4.6L/5.4L SOHC 2V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
Popular 2002 Ford Mustang Performance Ignition Products Categories
2002 Ford Mustang Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 2002 Ford Mustang. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 2 different Performance Ignition Products in our inventory ranging from $176.99 to $259.99. That means you can find the exact parts or products you need to keep that 2002 Ford Mustang running smoothly.
Performance Ignition Products are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 2002 Ford Mustang. MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 2002 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 2002 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 2002 Ford Mustang Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2002 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular MSD Ignition Performance Ignition Products
We carry MSD Ignition parts in our stock across Performance Coils categories, plus more. For a 2002 Ford Mustang, our most popular MSD Ignition Performance Ignition Products include:
