2002 Ford F-350 Super Duty Shocks and Struts

NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

• 150 PSI Pressurized Nitrogen Gas
• Multi Stage Velocity Sensitive Valving
• Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
• Bonded Iron Piston For Durability And Longer Shock Life
• Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
• Orifice Disk For Axle Control In Any Condition
• Red Polyurethane Bushings

Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

• DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
• BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Application tuned for precision on-road and off-road handling, Rancho RS7MT monotube shocks are highly effective in the dissipation of heat, making them ideal for extreme off-road use and larger wheel and tire packages. RS7MT shocks feature an integrated

Product Features:

• PRECISE HANDLING AND PERFORMANCE — Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on and off road
• STRONG AND DURABLE — Features a 14mm hardened chrome piston rod to resist scuffs & corrosion, double-welded loops at stress areas, double strength closure method and hot form reserve tube
• HANDLES EXTREME TEMPERATURE CHANGES — Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
• REDUCES FADE — Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade
• SMOOTH PERFORMANCE — Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
• THE RIGHT FIT — Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
• KEEPS DIRT AND DEBRIS OUT — Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
• BUILT TO LAST — Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling, for extra protection black shock boot RS1952 and RS1961 are available for purchase
• BOLD APPEARANCE– Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Ford Trucks
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

• DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
• BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

This SES Suspension Upgrade fits the rear suspension of a Ford F-350 pickup truck. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. We have engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you are pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times. This SES Suspension Upgrade replaces the jounce stop on the frame. Its Unique Design Ensures Superb Ride Quality ¿ Loaded Or Unloaded. Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

Product Features:

• Eliminate Vehicle Squatting And Sagging
• Cushion Road Shocks
• Hollow Rubber Springs Adjust Automatically To Keep The Vehicle Level At All Times, Improve Handling
• Each Laser Cut Piece Of Steel Is Precision Bent And Powder-Coated To Ensure A Quality Fit
• Hollow Rubber Springs Adjust Automatically To Keep The Vehicle Level At All Times
• Its Unique Design Ensures Superb Ride Quality ┐ Loaded Or Unloaded

This leaf helper spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this leaf helper spring is designed to match the fit and function of the original spring on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to rust and fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Softride(R) is the best way of describing the ride quality of our long Add-A-Leafs. The Softride(R) long Add-A-Leafs will bring new life and lift to your fatigued stock springs. And you can rest easy knowing that the Skyjacker(R) Softride(R) technology is at work in each pair. Also available are the Heavy-Duty Add-A-Leafs. These units are shorter and are designed for extra payload capacity. Tie bolts are included in each pair of Skyjacker(R) Add-A-Leafs. Also available are fitted leafs. Fitted leafs are designed as an option exclusively for Skyjacker(R) Softride(R) lifted leaf springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy winch bumper, an engine conversion, a swing away tire carrier, all your extra gear, etc.

Product Features:

• Softride(R) Long Add-A-Leafs Will Bring New Life And Lift To Your Fatigued Stock Springs And You Can Rest Easy Knowing That The Skyjacker(R) Softride(R) Technology Is At Work In Each Pair
• Add-A-Leafs Available Are The Heavy-Duty, Units Are Shorter And Are Designed For Extra Payload Capacity
• Tie Bolts Are Included In Each Pair Of Skyjacker(R) Add-A-Leafs
• Add-A-Leafs Also Available Are Fitted Leafs. Fitted Leafs Are Designed As An Option Exclusively For Skyjacker(R) Softride(R) Lifted Leaf Springs
• Fitted Leaf Springs Are Used When The Additional Weight Of Aftermarket Accessories Are Installed Such As Heavy Winch Bumper, An Engine Conversion, A Swing Away Tire Carrier, All Your Extra Gear, Etc.

Timbren Suspension Enhancement System – The Decision is Easy…Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Improve load handling Haul heavy loads with ease Eliminate sag and sway

Product Features:

• Eliminate Suspension Sag When Towing A Heavy Trailer Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway A Condition Which Occurs With Unbalanced Loads In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Softride(R) is the best way of describing the ride quality of our long Add A Leafs. The Softride(R) long Add A Leafs will bring new life and lift to your fatigued stock springs. And you can rest easy knowing that the Skyjacker(R) Softride(R) technology is at work in each pair. Also available are the Heavy Duty Add A Leafs. These units are shorter and are designed for extra payload capacity. Tie bolts are included in each pair of Skyjacker(R) Add A Leafs. Also available are ‘fitted leafs’. Fitted leafs are designed as an option exclusively for Skyjacker(R) Softride(R) lifted leaf springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy winch bumper, an engine conversion, a swing away tire carrier, all your extra gear, etc.

Product Features:

• Softride(R) Long Add A Leafs Will Bring New Life And Lift To Your Fatigued Stock Springs And You Can Rest Easy Knowing That The Skyjacker(R) Softride(R) Technology Is At Work In Each Pair
• Add A Leafs Available Are The Heavy Duty, Units Are Shorter And Are Designed For Extra Payload Capacity
• Tie Bolts Are Included In Each Pair Of Skyjacker(R) Add A Leafs
• Add A Leafs Also Available Are ‘Fitted Leafs’. Fitted Leafs Are Designed As An Option Exclusively For Skyjacker(R) Softride(R) Lifted Leaf Springs
• Fitted Leaf Springs Are Used When The Additional Weight Of Aftermarket Accessories Are Installed Such As Heavy Winch Bumper, An Engine Conversion, A Swing Away Tire Carrier, All Your Extra Gear, Etc.
• Limited Lifetime Warranty

HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

• Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
• Multi Stage Velocity Sensitive Valving
• Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
• Bonded Iron Piston For Durability And Longer Shock Life
• Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
• Orifice Disk For Axle Control In Any Condition
• Red Polyurethane Bushings

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

• KYB Recommended Orem Replacement Shock
• The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Full-Size Ford Truck
• The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
• Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
• KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

• DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
• BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Ford Trucks
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

• Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
• Multi Stage Velocity Sensitive Valving
• Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
• Bonded Iron Piston For Durability And Longer Shock Life
• Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
• Orifice Disk For Axle Control In Any Condition
• Red Polyurethane Bushings

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:

• Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
• 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
• 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
• Protective boot included – Protects the shock rod and oil seal

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available