2002 Chevrolet Express 3500 Drivetrains
More 2002 Chevrolet Express 3500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2002 Chevrolet Express 3500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2002 Chevrolet Express 3500 Drivetrains
Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)
from
$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
- Smooth design
- Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
Motive Gear – Differential Carrier (Part No.6258340)
Yukon Gear – Steel Cover For Dana 80 (Part No.32323)
Motive Gear – Differential Gear Install Kit (Part No.GM9.5IK)
Felpro – Differential Cover Gasket (Part No.RDS 55063)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Differential (Part No.26048)
from
$1145.00
Differential
Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)
from
$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 60 In A 4.88 Ratio (Part No.36077)
from
$369.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 60
- 9.75″ ring gear diameter
- 29 spline pinion
- 12 ring gear bolts
- 4.88 ratio
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Pinion Depth Shims For Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25" (Part No.55059)
from
$21.99
8.75-42, 8.75-89, 9.25″ Chrysler & GM, 9.5″, 10.25″ pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Chrysler 8.75″ with ’42’ or ’89’ case housing, Chrysler 9.25″, GM 9.5″ and Ford 10.25″
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)
Pro-King – Differential Internal Nest Kit (Part No.744A717)
from
$323.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-111)
from
$282.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
- Related repair – smart to have on hand when installing a differential ring and pinion
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Motive Gear – Differential Pinion Nut (Part No.15994582)
Carquest – Engine Camshaft Position Sensor Connector (Part No.PT196)
from
$35.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
- Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
- Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
- High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
- Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
Yukon Gear – Set Up Bearing (Part No.56039)
from
$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 60
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)
from
$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 10.5″ 14 bolt truck with Eaton positraction
- Carbon fiber clutches
Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)
from
$47.99
Plug adapter for extra-large clamshell. No Return.
Product Features:
See More
Product Features:
- Plug adapter for Extra Large clamshell
- Fits carrier bearing puller
Yukon Gear – Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up (Part No.32172)
from
$747.99
Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler Dana Spicer 80 with 35 spline axles
- 4.10 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)
Yukon Gear – Pinion Install Kit For ’89 To ’98 10.5" GM 14 Bolt Truck Differential (Part No.13059)
from
$404.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1989-1997 GM 10.5″ 14 bolt truck
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)
from
$10.99
14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 10.5″ 14 bolt truck
- 4.11 and down ratio
- 1/2″ x 18 thread
- 2.085″ overall length
Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)
from
$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
- 1/2″ x 18 thread
Popular 2002 Chevrolet Express 3500 Drivetrains Categories
2002 Chevrolet Express 3500 Drivetrains
You count on your 2002 Chevrolet Express 3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 252 Drivetrains ranging in price from $1.89 to $1,605.99, you’re sure to find everything you need for your 2002 Chevrolet Express 3500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 2002 Chevrolet Express 3500 Drivetrains start as low as $1.89!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,393 extensive product reviews on 2002 Chevrolet Express 3500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2002 Chevrolet Express 3500 below to get started!
Top-Rated Drivetrains Brands For Your 2002 Chevrolet Express 3500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Chevrolet Express 3500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2002 Chevrolet Express 3500 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2002 Chevrolet Express 3500 Drivetrains
What are the most purchased Drivetrains for the 2002 Chevrolet Express 3500?
Out of 252 Drivetrains for the 2002 Chevrolet Express 3500, the most popular in our inventory are:
What are the top-rated 2002 Chevrolet Express 3500 Drivetrains?
Top-rated Drivetrains for your 2002 Chevrolet Express 3500 based on customer reviews/ratings are:
