2002 Chevrolet Express 3500 Differentials

Essential 2002 Chevrolet Express 3500 Differentials

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down (Part No.32048)

Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down

from

$539.99
Yukon Performance steel spool for GM 14T with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck with 30 spline axles
  • 4.10 and down ratio only or 4.56 and up thick gears
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

SKF – Wheel Bearing (Part No.K8000205983SKF)

Wheel Bearing

from

$60.23
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)

Chrome Replacement Cover For Dana 80

from

$69.99
Chrome replacement cover for Dana 80.

Product Features:
  • Fits Dana Spicer 80
  • Chrome
See More

FAG US – CUP (Part No.LM501310)

CUP

from

$9.99
CUP

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Positraction Internals For 9.5" GM With 33 Spline Axles (Part No.16057)

Positraction Internals For 9.5" GM With 33 Spline Axles

from

$606.99
Yukon positraction internals for 9.5″ GM with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. These internals are for Eaton positractions only. They will not fit factory positractions.

Product Features:
  • Spider gear kit
  • Fits GM 9.5″ with Eaton positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Motive Gear – Differential Crush Sleeve (Part No.14012691)

Differential Crush Sleeve

from

$2.99


Product Features:
  • CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000
See More

Motive Gear – Differential Gear Install Kit (Part No.D80IK)

Differential Gear Install Kit

from

$143.99


Product Features:
  • MINI INSTALL KIT DANA 80
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design (Part No.16181)

Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design

from

$289.99
Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R14RL)

Differential Bearing Kit - Koyo

from

$144.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • GM 10.5 KIT BRG & SEAL LATE ’88-97
See More

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Replacement Inner Slinger For Dana 60

from

$9.99
Product Features:
  • Inner oil slinger for Dana Spicer 60
See More

Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)

Replacement Pinion Nut Washer For Dana 80

from

$5.99
Product Features:
  • Pinion nut washer
  • Fits Dana Spicer 80
See More

Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

Dana 80 Tracloc Clutch Set Round Design

from

$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 80 Trac Loc positraction
See More

Yukon Gear – Round Replacement Yoke Companion Flange For Dana 60 And 70 (Part No.41033)

Round Replacement Yoke Companion Flange For Dana 60 And 70

from

$287.99
Yukon round replacement yoke companion flange for Dana 60 and 70. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 5.00″ O.D.
  • 8 x 4.25″ bolt pattern
  • Round companion flange
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Differential Pinion Shim Kit

from

$13.99


Product Features:
  • PINION SHIM – DANA 70 ALL
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

Yukon Gear – Pinion Install Kit For ’98 & Up GM 9.5" Differential (Part No.13076)

Pinion Install Kit For '98 & Up GM 9.5" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1998 and up GM 9.5″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 4.88 Ratio (Part No.24138)

High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 4.88 Ratio

from

$449.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear for a 4.10 & down carrier.

Product Features:
  • Fits GM 10.5″ GM 14 bolt truck
  • 10.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.88 ratio
  • Thick gear set for 4.11 and down carrier
See More

ACDelco – Differential Cover G (Part No.J7018826881ACD)

Differential Cover G

from

$44.03
Differential Cover G

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Pro-King – Differential Case (Empty) (Part No.744A714)

Differential Case (Empty)

from

$345.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier (Part No.33205)

Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier

from

$32.99
Product Features:
  • Cross pin shaft
  • Fits GM 9.5″
  • Dura Grip positraction
See More

Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)

Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck

from

$89.99
Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:
  • Cross pin shaft
  • Fits GM 10.5″ 14 bolt truck
See More

2002 Chevrolet Express 3500 Differentials

Maybe you’re in the middle of a full rebuild of that 2002 Chevrolet Express 3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 216 different Differentials in our inventory ranging from $1.89 to $2,324.99. That means you can find the exact parts or products you need to keep that 2002 Chevrolet Express 3500 running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 2002 Chevrolet Express 3500. Valvoline, Royal Purple, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2002 Chevrolet Express 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,664 reviews in this category, some of the top rated parts include Ring and Pinion Bearing Installation Kit with 3.8 stars and Rear Differential Cover with 4.4 stars.

So if you’re in the market for aftermarket Differentials to keep your 2002 Chevrolet Express 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2002 Chevrolet Express 3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2002 Chevrolet Express 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Express 3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2002 Chevrolet Express 3500 Differentials

What are the most purchased Differentials for the 2002 Chevrolet Express 3500?

Out of 216 Differentials for the 2002 Chevrolet Express 3500, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets

What are the top-rated 2002 Chevrolet Express 3500 Differentials?

Top-rated Differentials for your 2002 Chevrolet Express 3500 based on customer reviews/ratings are:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
“good price”
Rear Differential Cover
from $36.99
(15)
Rear Differential Cover
“For as it should”
Bearings
from $23.99
(7)
Bearings
“Good price”