2002 BMW 530i Cooling and Climate Controls

Essential Cooling and Climate Controls for 2002 BMW 530is

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

APA/URO Parts – Climate Control Button Set (Part No.R2023319848APA)

Climate Control Button Set

from

$152.79
Climate Control Button Set

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55334)

A/C Discharge Line Hose Assembly

from

$61.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Coolant Level Sensor

from

$27.06
Coolant Level Sensor

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Dorman – Thermostat Assembly: Includes Complete Housing Assembly, 207 Degrees (Part No.902-816)

Thermostat Assembly: Includes Complete Housing Assembly, 207 Degrees

from

$194.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

MAHLE Original – Engine Coolant Thermostat Gasket (Part No.C32308)

Engine Coolant Thermostat Gasket

from

$4.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

ACM – Air Conditioning Schrader Valve Cap (Part No.R1138333659ACM)

Air Conditioning Schrader Valve Cap

from

$14.61
ACM is a supplier of Original Equipment quality climate control products. Only for R134A suction pipes.
See More

Corteco – Water Pipe O-Ring (Part No.G2026279597CFW)

Water Pipe O-Ring

from

$1.51
Water Pipe O-Ring

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Radiator Drain Plug

from

$8.14
Radiator Drain Plug

Victor Reinz – Engine Coolant Pipe O-Ring (Part No.41-10452-00)

Engine Coolant Pipe O-Ring

from

$5.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

APA/URO Parts – Radiator Mount (Part No.G1020426888APA)

Radiator Mount

from

$12.43
Radiator Mount

Rein – Cap-Expansion Tank (Part No.CPE0030P)

Cap-Expansion Tank

from

$18.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.2945K)

A/C Compressor and Component Kit

from

$489.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Carquest Premium – Standard Duty Fan Clutch – Thermal 6" Import/Compact (Part No.215024)

Standard Duty Fan Clutch - Thermal 6" Import/Compact

from

$175.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1042)

Engine Water Pump: New, Gasket/Seals Included

from

$59.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Felpro – Engine Coolant Outlet Gasket (Part No.36055)

Engine Coolant Outlet Gasket

from

$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35547)

Engine Coolant Thermostat Housing Seal

from

$1.89
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Vemo – Water Temperature Se (Part No.P4036339106VMO)

Water Temperature Se

from

$59.66
Water Temperature Se

Dorman – Blower Motor Resistor Harness (Part No.645-735)

Blower Motor Resistor Harness

from

$66.99
Fan motor no longer working properly? This blower motor resistor connector is designed to replace an original equipment connector damaged by corrosion or overheating. Corrosion-resistant terminals ensure reliable performance.

Product Features:
  • Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application.
  • Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
  • Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
  • Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness
See More

Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)

Oil Temperature Send

from

$63.15
Oil Temperature Send

APA/URO Parts – Engine Cooling Fan Blade (Part No.G505028207APA)

Engine Cooling Fan Blade

from

$68.74
The APA/URO Engine Cooling Fan Blade is designed for specific vehicle fit, form, and function providing quiet dependable operation and longer service life.

Product Features:
  • Manufactured and tested to OEM specifications
  • Precision assembled and balanced with all NEW components for vibration free operation
  • OE Design and Technology insures ease of installation right out of the box
  • Manufactured in ISO and TS Certified facilities
See More

Dorman – Brass Coolant Air Bleeder Screw (Part No.902-404HP)

Brass Coolant Air Bleeder Screw

from

$8.79
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles.
  • Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse.
  • Durable construction – made of quality brass for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA1967)

HVAC Heater Core Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Victor Reinz – Engine Water Pump Housing O-Ring (Part No.41-10453-00)

Engine Water Pump Housing O-Ring

from

$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85955)

Engine Coolant Integrated Thermostat Housing

from

$132.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring  to ensure proper seal (where applicable
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • All-in-one bolt on solution for a complete repair
  • Includes quality thermostat
See More

Beck/Arnley – Water Flange (Part No.147-0042)

Water Flange

from

$37.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Premium materials to withstand extreme temperatures
  • Includes seals where applicable
  • Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
  • Application specific for this vehicle
See More

Upgrade your 2002 BMW 530i with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2002 BMW 530i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 530i functioning at its best. At Advance Auto Parts, we offer a wide selection of 128 Cooling and Climate Controls for the 2002 BMW 530i, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2002 BMW 530i at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.31 to $489.99, with an average price of $104.42. Our 128 Cooling and Climate Controls in stock come from 38 trusted brands, so you’re sure to find the right part for your 2002 BMW 530i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 BMW 530i, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $22.99, and at an average 4 stars rating. With 533 customer reviews and counting, our 2002 BMW 530i Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 BMW 530i is always ready to roll. We’re committed to providing you with everything you need to keep your 530i in top shape, all in one place. Start shopping confidently below for your 2002 BMW 530i!

Best-Selling Blower Motor and Related Products for 2002 BMW 530is

Enhance the driving experience in your BMW with 6 quality Blower Motor and Related Product components, starting at $66.99.

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1104)

HVAC Blower Motor Resistor

from

$176.99
Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:
  • Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75011)

Blower Motor: With Wheel

from

$148.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

ACM – Blower Motor (Part No.R2031258872ACM)

Blower Motor

from

$167.46
ACM manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.

Product Features:
  • OE-Equivalent.
  • Direct Fit Replacement.
  • High quality OE electrical components.
  • OE quality brushes and bearings.
  • Balanced rotor assembly.
See More

Dorman – Blower Motor Resistor Harness (Part No.645-735)

Blower Motor Resistor Harness

from

$66.99
Fan motor no longer working properly? This blower motor resistor connector is designed to replace an original equipment connector damaged by corrosion or overheating. Corrosion-resistant terminals ensure reliable performance.

Product Features:
  • Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application.
  • Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
  • Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
  • Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness
See More

Original Equipment – Blower Motor Regulat (Part No.R2041275216OEA)

Blower Motor Regulat

from

$148.74
Blower Motor Regulat

Dorman – BMR (Part No.984-430)

BMR

from

$113.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Most Popular 2002 BMW 530i Engine Cooling Parts

Customize your BMW with 81 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $456.99.

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Dorman – Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-536)

Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement

from

$85.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Behr – Radiator (Part No.G100089198BEH)

Radiator

from

$292.16
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees (Part No.14602)

Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees

from

$73.99
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1169)

Engine Water Pump: New, Gasket/Seals Included

from

$78.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Radiator Cap: 30 PSI (Part No.10247)

Radiator Cap: 30 PSI

from

$23.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-404)

Coolant Air Bleeder Screw

from

$4.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Standard Duty Fan Clutch – Thermal 6" Import/Compact (Part No.215024)

Standard Duty Fan Clutch - Thermal 6" Import/Compact

from

$175.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35761)

Engine Coolant Thermostat Housing Gasket

from

$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

Carquest Premium – Radiator (Part No.432526)

Radiator

from

$299.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Dorman – Brass Coolant Air Bleeder Screw (Part No.902-404HP)

Brass Coolant Air Bleeder Screw

from

$8.79
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles.
  • Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse.
  • Durable construction – made of quality brass for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1038)

Coolant Temperature Sensor with O-Ring

from

$26.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Dorman – Engine Water Pump Pulley (Part No.300-394)

Engine Water Pump Pulley

from

$56.99
Damaged your engine water pump pulley? This pulley is a direct replacement for the original manufacturer’s part on specific vehicle years, makes and models, restoring proper performance.

Product Features:
  • Direct replacement – this engine water pump pulley matches the fit and function of the original part on specific vehicles.
  • Durable design – built to withstand the elements and road debris.
  • Thoroughly tested – must pass strict standards to ensure reliable longevity
  • Trustworthy quality – backed by team of engineers and inspectors in United States
See More

Wahler – Thermostat (Part No.G400091331WAH)

Thermostat

from

$76.19
Wahler is a provider of premium quality thermostats and thermo-switches in OE quality. The varying applications and divergent technologies of the internal combustion engine call for thermostats featuring different operating characteristics and modes of operation. Therefore Wahler provides thermostats with a highly accurate coolant control.

Product Features:
  • Strict quality control, and functional testing
  • Self-cleaning and self-aligning thermostat valve
  • Original equipment design provides exact fit and performance
  • Precise sealing edges reduce leakage and premature cooling
  • Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
  • Stainless steel assembly and springs are engineered for long life
See More

KAI – Radiator (Part No.RAD2284)

Radiator

from

$137.99
New Platinum Pro Radiator, 2.5/2.8/3.0/4.4 Liter Engines

Product Features:
  • 2.5/2.8/3.0/4.4 Liter Engines, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Mahle – Thermostat (Part No.G400091331MAH)

Thermostat

from

$115.23
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:
  • OE quality and design
  • Maintenance-free, durable elements
See More

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.621-584)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$75.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

MAHLE Original – Engine Coolant Pipe O-Ring (Part No.C32348)

Engine Coolant Pipe O-Ring

from

$1.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

KAI – Radiator Fan Shroud For Models With Inline 6-Cylinder Engine (Part No.BM3110103)

Radiator Fan Shroud For Models With Inline 6-Cylinder Engine

from

$73.99
New Platinum Pro Radiator Fan Shroud, Inline 6 Cylinder Engine

Product Features:
  • Inline 6 Cylinder Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

APA/URO Parts – Engine Cooling Fan Blade (Part No.G505028207APA)

Engine Cooling Fan Blade

from

$68.74
The APA/URO Engine Cooling Fan Blade is designed for specific vehicle fit, form, and function providing quiet dependable operation and longer service life.

Product Features:
  • Manufactured and tested to OEM specifications
  • Precision assembled and balanced with all NEW components for vibration free operation
  • OE Design and Technology insures ease of installation right out of the box
  • Manufactured in ISO and TS Certified facilities
See More

KAI – Coolant Reservoir (Part No.BM3014103)

Coolant Reservoir

from

$57.99
New Platinum Pro Coolant Recovery Tank

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1142)

Coolant Temperature Sensor

from

$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Calorstat – Thermostat (Part No.G400091331CAL)

Thermostat

from

$120.66
CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:
  • Comfort enhancement by a faster cabine warming
  • CO2 emissions and fuel consumption reduction
  • Thermostat opening driven by the ECU (electrical thermostat)
  • An adaptation of the control strategies to the vehicle use (electrical thermostat)
See More

Graf – Graf Water Pump (Part No.G3000457932GRA)

Graf Water Pump

from

$65.77
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Febi – Water Pump Pulley, Plastic (Part No.G302092619FEB)

Water Pump Pulley, Plastic

from

$56.14
Water Pump Pulley, Plastic

Rein – Coolant Pipe (Part No.CHP0567)

Coolant Pipe

from

$49.99
Rein Automotive OE quality coolant pipes fit European vehicles the way the original manufacturer intended. Designed to be a direct replacements for the OE coolant, Rein coolant pipes are identical to the OEM.

Product Features:
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Made to strict engineering quality standards.
  • Part is produced using only the highest quality materials.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)

Engine Cooling Auxiliary Thermo-Fan Switch

from

$37.38
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Auxiliary Coolant Pump (Part No.902-076)

Auxiliary Coolant Pump

from

$144.99
This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
  • Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Geba – Geba Water Pump (Part No.G3000457932GEB)

Geba Water Pump

from

$87.50
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

APA/URO Parts – Water Pump Pulley, Aluminum (Part No.G302092619APA)

Water Pump Pulley, Aluminum

from

$71.23
Water Pump Pulley, Aluminum

Rein – Coolant Pipe (Part No.CHP0597)

Coolant Pipe

from

$64.99
Rein Automotive OE quality coolant pipes fit European vehicles the way the original manufacturer intended. Designed to be a direct replacements for the OE coolant, Rein coolant pipes are identical to the OEM.

Product Features:
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Made to strict engineering quality standards.
  • Part is produced using only the highest quality materials.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

FAE – Twin Connection Swit (Part No.C607075284FAE)

Twin Connection Swit

from

$28.97
Twin Connection Swit

APA/URO Parts – Radiator Drain Plug (Part No.G1060266550APA)

Radiator Drain Plug

from

$10.90
Radiator Drain Plug

Carquest Premium – New Auxiliary Water Pump (Part No.T1315)

New Auxiliary Water Pump

from

$456.99
This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:
  • Electric water pump
  • Specialized for vehicles using supplemented cooling for the engine or components
  • Plastic housing
  • All components necessary for installation are supplied with pump
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Behr – Hella Service Auxiliary Cooling Fan Assembly (Part No.G5000174959BEH)

Hella Service Auxiliary Cooling Fan Assembly

from

$442.97
The demands on engine cooling systems are constantly increasing. Today more than ever, new solutions aim to have a positive impact on fuel consumption, emissions, driving comfort and driving safety via heat transfer. Quality products from Behr Hella Service are distinguished by their suitability, reliability and long service life.

Product Features:
  • OE quality
  • Quiet operation and dependable performance
  • Dual Bearing design technology
  • Vibration free operation
  • Precision assembled and balanced with all new components
  • Tested to OEM specifications
See More

TYC Genera – TYC / Genera Auxiliary Fan Assembly (Part No.G5000174959TYC)

TYC / Genera Auxiliary Fan Assembly

from

$376.64
TYC brand Cooling Fan motors use high grade ball bearings, magnets and carbon brushes. This combination allows the assemblies to be durable and dependable. To ensure durability, each cooling fan design is run through accelerated tests like corrosion resistance, endurance, moisture, torsion and vibration. At TYC/Genera, every opportunity has been taken to build a replacement part that will install, perform and last and provide years of trouble-free use!

Product Features:
  • OE Quality
  • High grade ball bearings, magnets and brushes
  • Durable and Dependable
  • Thoroughly Tested
See More

Nissens – Radiator (Part No.G100089198NSS)

Radiator

from

$330.80
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
  • Compact and lightweight.
See More

Worldpac – A/C CONDENSER FAN AS (Part No.R10351944095API)

A/C CONDENSER FAN AS

from

$302.09
A/C CONDENSER FAN AS

Autopart International Inc – Radiator (Part No.G10001971708API)

Radiator

from

$262.96
Radiator

Pierburg – Pierburg Auxiliary Water Pump (Part No.G3050170178APG)

Pierburg Auxiliary Water Pump

from

$190.98
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Vemo – Fan Clutch (Part No.G501085046VMO)

Fan Clutch

from

$190.35
Fan Clutch

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1094)

Water Pump with Fan Clutch

from

$151.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

Top Picks for 2002 BMW 530i Heating Parts

Upgrade BMW 530is with top-quality Heating Parts parts, including 7 OEM and aftermarket selections for your 2002 model.

ACM – Heater Core O-Ring (Part No.R30011351696ACM)

Heater Core O-Ring

from

$2.08
Heater Core O-Ring

Behr – Behr Blower Motor (Part No.R2031230103BEH)

Behr Blower Motor

from

$295.54
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

Nissens – Heater Core (Part No.R3000927803NSS)

Heater Core

from

$229.41
Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Meets or exceeds OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Provides exceptional reliability.
See More

Febi – Heater Valve (Part No.R3020177024FEB)

Heater Valve

from

$189.41
Heater Valve

Carquest Premium – HVAC Thermostatic Operated Electric Heater Valve (Part No.T74892)

HVAC Thermostatic Operated Electric Heater Valve

from

$177.99
Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.
See More

Autopart International Inc – Heater Valve (Part No.R30201961468API)

Heater Valve

from

$140.61
Heater Valve

Carquest Premium – Heater Core (Part No.910681)

Heater Core

from

$119.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

In-Demand Air Conditioning Parts for 2002 BMW 530is

Select from 31 premium Air Conditioning Parts parts for your 2002 BMW 530i, with prices ranging from $1.31 to $489.99.

Carquest Premium – A/C New; w/ Clutch; w/ 7SB16C Compressor (Part No.T78396)

A/C New; w/ Clutch; w/ 7SB16C Compressor

from

$371.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39158)

A/C Block Type O-Ring Expansion Valve

from

$31.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83070)

A/C Filter Drier with Pad Mount

from

$45.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1749)

Multi Purpose Relay

from

$36.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

DENSO – New Compressor With Clutch (Part No.471-1119)

New Compressor With Clutch

from

$413.99
As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

KAI – A/C Compressor, L6 Engine (Part No.ACP011470)

A/C Compressor, L6 Engine

from

$435.99
New Standard Replacement A/C Compressor, L6 Engine

Product Features:
  • L6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Nissens – Nissens A/C Condenser (Part No.R103081970NSS)

Nissens A/C Condenser

from

$262.73
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38686)

A/C Block Type Flange Expansion Valve

from

$49.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Bosch – ABS Speed Sensor (Part No.N6030158223BOS)

ABS Speed Sensor

from

$106.32
The Bosch OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.2945K)

A/C Compressor and Component Kit

from

$489.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Autopart International Inc – A/C Compressor (Part No.R10003199441API)

A/C Compressor

from

$415.29
A/C Compressor

Behr – Air Conditioning Evaporator, Without Expansion Valve (Part No.R1130163404BEH)

Air Conditioning Evaporator, Without Expansion Valve

from

$200.80
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. With Climate Control
See More

Carquest Premium – A/C Condenser (Part No.6673)

A/C Condenser

from

$154.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44030)

A/C Plate and Fin Evaporator

from

$139.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1494)

ABS Wheel Speed Sensor

from

$138.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Delphi – ABS Wheel Speed Sensor (Part No.SS20007)

ABS Wheel Speed Sensor

from

$117.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
  • Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
  • Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44034)

A/C Plate and Fin Evaporator

from

$112.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

AC Pressure Sensor

from

$85.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

KAI – A/C Condenser (Part No.CNDDPI4993)

A/C Condenser

from

$82.99
New Platinum Pro A/C Condenser

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Air Conditioning Pressure Sensor (Part No.904-611)

Air Conditioning Pressure Sensor

from

$76.99
Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:
  • Direct replacement – this A/C transducer switch is an exact replacement for the original switch
  • Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
  • Easy installation – no special tools required
  • Quality tested – switch has been tested to ensure proper fit and function
See More

ACM – A/C Expansion Valve (Part No.R1045335895ACM)

A/C Expansion Valve

from

$75.54
A/C Expansion Valve

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55334)

A/C Discharge Line Hose Assembly

from

$61.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

WSO – ABS Speed Sensor (Part No.N6030158223WSO)

ABS Speed Sensor

from

$57.01
ABS Speed Sensor

ACM – A/C Expansion Valve (Part No.R1045273169ACM)

A/C Expansion Valve

from

$56.09
The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style fittings and connectors
  • Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

KAI – A/C Expansion Valve (Part No.ACX010574)

A/C Expansion Valve

from

$45.99
New Standard Replacement A/C Expansion Valve

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Santech – A/C Receiver Drier (Part No.R1040120925SII)

A/C Receiver Drier

from

$43.53
A/C Receiver Drier

Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)

A/C Pressure Switch

from

$40.96
A/C Pressure Switch

KAI – A/C System Seal Kit (Part No.FTT010073)

A/C System Seal Kit

from

$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine

Product Features:
  • MT2640, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACM – Air Conditioning Schrader Valve Cap (Part No.R1138333659ACM)

Air Conditioning Schrader Valve Cap

from

$14.61
ACM is a supplier of Original Equipment quality climate control products. Only for R134A suction pipes.
See More

Vaico – Fan Shroud Rivet (Part No.G502575975VCO)

Fan Shroud Rivet

from

$1.31
Fan Shroud Rivet

Most Sold 2002 BMW 530i HVAC Electrical Parts

Explore our best-selling BMW parts for the 2002 530i among 3 OEM and aftermarket options starting from $29.33.

APA/URO Parts – Climate Control Button Set (Part No.R2023319848APA)

Climate Control Button Set

from

$152.79
Climate Control Button Set

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA1967)

HVAC Heater Core Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACM – Heater Temp Sensor (Part No.R3037273378ACM)

Heater Temp Sensor

from

$29.33
ACM is a supplier of Original Equipment quality climate control products.
See More

Top-Rated Cooling and Climate Controls Brands For Your 2002 BMW 530i

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2002 BMW 530is. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 2002 530i start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2002 BMW 530i Cooling and Climate Controls

When it comes to maintaining or upgrading your 2002 BMW 530i, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2002 BMW 530i. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

Popular Carquest Premium 2002 BMW 530i Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2002 BMW 530i owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2002 530i, Advance Auto Parts carries a full inventory of 28 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your BMW in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $23.99 to $489.99, plus, with more than 112 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

Multi Purpose Relay
from
$36.49
This product is not rated

Multi Purpose Relay

“”

Coolant Temperature Sensor
from
$29.99
This product is not rated

Coolant Temperature Sensor

“”

Coolant Temperature Sensor with O-Ring
from
$26.99
This product is not rated

Coolant Temperature Sensor with O-Ring

“”

FAQs for 2002 BMW 530i Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2002 BMW 530is?

Out of 128 Cooling and Climate Controls that fit 2002 BMW 530is, the following parts are the top sellers:

What’s the price range for 2002 BMW 530i Cooling and Climate Controls?

Cooling and Climate Control prices for the 2002 BMW 530i start at $1.31 and go up to $489.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2002 BMW 530i?

The average price for Cooling and Climate Controls for the 2002 BMW 530i is $104.42. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other BMW 530i model years?

Yes, we currently carry Cooling and Climate Controls for 19 model years of BMW 530is between 1975 and 2023. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2007, and 2006.

What are the cheapest Cooling and Climate Controls for my 2002 BMW 530i?

The cheapest 2002 BMW 530i Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2002 BMW 530i?

Out of 533 reviews by customers, our 2002 BMW 530i Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2002 BMW 530i and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2002 BMW 530i?

Can I get help with 2002 BMW 530i Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Cooling and Climate Controls and more.

What is your return policy for BMW 530i Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new BMW 530i Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.