2001 Toyota Sequoia Drivetrains

Essential 2001 Toyota Sequoia Drivetrains

NTN – Differential Pinion (Part No.J7020164790NTN)

Differential Pinion

from

$120.81
Differential Pinion

Dorman – Front Differential Actuator (Part No.600-410)

Front Differential Actuator

from

$311.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:
  • Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
  • Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
  • Smart solution – delivers reliable fit and function for competitive price
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

National – Multi Purpose Seal (Part No.710957)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Yukon Gear – Outer Oil Slinger (Part No.33025)

Outer Oil Slinger

from

$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:
  • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
See More

Driveworks – Differential Pinion Seal (Part No.S-710734)

Differential Pinion Seal

from

$19.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential) (Part No.13085)

Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential)

from

$399.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Toyota Tacoma and T100 without factory locking differential
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

NOK – Diff. Side Cover Sea (Part No.J7041234289NOK)

Diff. Side Cover Sea

from

$13.78
Diff. Side Cover Sea

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter (Part No.614-004)

Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter

from

$29.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)

Toyota Bearing Retainer For '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

from

$22.99
Product Features:
  • Bearing retainer
  • Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Dorman – Rear Axle Differential Vent (Part No.924-262)

Rear Axle Differential Vent

from

$11.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Toyota T100 & Tacoma Pinion Nut (Part No.33160)

Toyota T100 & Tacoma Pinion Nut

from

$15.99
Toyota T100 & Tacoma pinion nut.

Product Features:
  • Pinion nut
  • Fits Toyota Tacoma and T100 without factory locking differential
See More

Yukon Gear – 07 & Up Tundra & Sequoia Front Ring Gear Bolt (Part No.33071)

07 & Up Tundra & Sequoia Front Ring Gear Bolt

from

$7.99
07 & up Tundra & Sequoia front ring gear bolt..

Product Features:
  • Ring gear bolt
  • Fits 2007 and up Toyota Tundra front
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55428)

Differential Carrier Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm (Part No.33399)

T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm

from

$18.99
Product Features:
  • Side gear thrust washer
  • Fits Toyota Tacoma and T100
See More

Yukon Gear – Minor Install Kit For Toyota T100 And Tacoma Rear Differential (Part No.12069)

Minor Install Kit For Toyota T100 And Tacoma Rear Differential

from

$144.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Toyota Tacoma and T100 without factory locking differential
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – T100 & Tacoma Standard Pinion Gear Thrust Washer (Part No.33396)

T100 & Tacoma Standard Pinion Gear Thrust Washer

from

$30.99
Product Features:
  • Pinion gear thrust washer
  • Fits Toyota Tacoma and T100
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

USA Standard Gear – Ring & Pinion Gear Set For Toyota 7.5" Reverse Rotation In A 4.56 Ratio (Part No.36245)

Ring & Pinion Gear Set For Toyota 7.5" Reverse Rotation In A 4.56 Ratio

from

$269.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits reverse rotation Toyota 7.5″
  • 7.500″ ring gear diameter
  • 23 spline pinion
  • 10 ring gear bolts
  • 4.56 ratio
See More

Yukon Gear – DiffrlPartsKit (Part No.14233)

DiffrlPartsKit

from

$434.99
DiffrlPartsKit

Dorman – Front Driveshaft Assembly (Part No.938-337)

Front Driveshaft Assembly

from

$562.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – Differential (Part No.26050)

Differential

from

$759.99
Differential

Motive Gear – Differential Gear Install Kit (Part No.TOYV6IK)

Differential Gear Install Kit

from

$42.99


Product Features:
  • TOYOTA 8″ V6&4CLY TURBO
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – T100 & Tacoma Roll Pin (Part No.33420)

T100 & Tacoma Roll Pin

from

$8.99
Product Features:
  • Roll pin
  • Fits Toyota Tacoma and T100
See More

2001 Toyota Sequoia Drivetrains

You count on your 2001 Toyota Sequoia to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 120 Drivetrains ranging in price from $2.99 to $907.19, you’re sure to find everything you need for your 2001 Toyota Sequoia.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Moog, and Driveworks. 2001 Toyota Sequoia Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,672 extensive product reviews on 2001 Toyota Sequoia Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter with 3.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2001 Toyota Sequoia below to get started!

Top-Rated Drivetrains Brands For Your 2001 Toyota Sequoia

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Toyota Sequoia running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Spicer Drivetrains

You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 2001 Toyota Sequoia back on the road. Some of the top-rated Spicer products in these categories are:
Universal Joint
from $35.99
(2)
Universal Joint
U-Joints
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2001 Toyota Sequoia Drivetrains

What are the most purchased Drivetrains for the 2001 Toyota Sequoia?

Out of 120 Drivetrains for the 2001 Toyota Sequoia, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 2001 Toyota Sequoia Drivetrains?

Top-rated Drivetrains for your 2001 Toyota Sequoia based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
from $32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
CV Axle Shaft Assembly
from $162.99
(12)
CV Axle Shaft Assembly
“First pair I received they were both damaged in shipping . They Reship them ,With expedited service i got them 5 days later.”