2001 Lincoln Town Car Valve Cover and Cylinder Heads

Essential 2001 Lincoln Town Car Valve Cover and Cylinder Heads

NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)

Engine Cylinder Head Temperature Sensor

from

$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)

Engine Cylinder Head Temperature Sensor

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

289-302 Ford Head Bolt Kit

from

$107.99


Product Features:
  • Highest Quality Head Bolts
  • Cold-Formed/Heat Treated
  • Ensures Molecular Integrity
  • Reduced Diameter Bolt Heads
  • Hardened/Parallel-Ground Washers Included
  • Rated At 170000 psi
  • Manufactured By ARP
See More

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)

Engine Cylinder Head Bolt Set

from

$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 9790 PT-16)

Cylinder Head Gasket Set

from

$241.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 9280 PT-2)

Cylinder Head Gasket Set

from

$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7364)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford

from

$141.99
Product Features:
  • Head: 4.100″ Bore/0.045″ Thick/9.8cc Vol.
  • Intake: 1.20″x2.00″ Port/.060″ Thick
  • Exhaust: 1.25″x1.48″ Port
  • 5/16″ Valve Cover
  • Multi Piece Configuration
See More

Sealed Power – Engine Rocker Arm Kit (Part No.R-879)

Engine Rocker Arm Kit

from

$18.79
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Complete rocker arm assembly
  • 1 Arm
  • 1 Pivot
  • Stamped steel
  • Bolt type mount
  • Utilizes ISO & QS certified manufacturing
See More

Sealed Power – Engine Rocker Arm (Part No.R-1096)

Engine Rocker Arm

from

$20.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2205)

Engine Valve Lifter

from

$15.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2271)

Engine Valve Lifter

from

$10.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Edelbrock – Hydraulic Roller Lifter Kit for Big-Block Ford. (Part No.97453)

Hydraulic Roller Lifter Kit for Big-Block Ford.

from

$959.99
Product Features:
  • Precision Self-Aligning Hydraulic Roller Lifter
  • Retro-Fit Lifter
  • Use w/Hyd Roller Lifter In Non-Roller Engine Block
  • Originally Equipped w/Conventional Lifters
See More

Dorman – STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (sold by each) (Part No.675-131)

STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (sold by each)

from

$3.99
Cylinder head bolt stripped or broken? This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – designed to match the fit and function of the original cylinder head bolt on certain vehicles
  • Corrosion resistant – withstands elements for reliable service life
  • Application specific – made to hold cylinder head in place on specific vehicles
  • Trustworthy quality – backed by team of engineers and inspectors in United States
See More

Mahle – Cyl. Head Bolt Set (Part No.A3031566828MAH)

Cyl. Head Bolt Set

from

$68.99
Cyl. Head Bolt Set

Sealed Power – Engine Exhaust Valve (Part No.V-4603)

Engine Exhaust Valve

from

$16.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Engine Intake Valve (Part No.V-3956)

Engine Intake Valve

from

$10.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Chrome plated stem
  • Hard coating added to surface for strength & aiding in lubrication
  • Note – coating added in varying thicknesses depending on application
  • Innovative design, using leading edge materials
  • Utilizes ISO & QS certified manufacturing
See More

Mahle – Mahle Exhaust Valve (Part No.A4050200618MAH)

Mahle Exhaust Valve

from

$25.55
MAHLE manufactures intake and exhaust valves in forged and hot-extruded versions in a multitude of materials for gasoline and diesel engines of every size. Depending on the stresses they are subjected to, the valves are reinforced around the seat, hardened, nitrided, or chrome-plated. Sodium-filled hollow valves can be used for extremely high thermal and mechanical loads. Since stresses on the components continue to rise in modern engines, MAHLE is focusing on the ongoing development of cooled valves.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)

Rubber Expansion Plug 1-1/2 In. - Size Range 1-1/2 In. - 1-5/8 In. (sold by each)

from

$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spartan – Engine Cylinder Head; Ford 4.6 00-14 SOHC Left Head (Part No.2FXN)

Engine Cylinder Head; Ford 4.6 00-14 SOHC Left Head

from

$618.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Edelbrock – Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90" (Part No.60379)

Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90"

from

$1035.99
Product Features:
  • Capable of 300 plus horsepower when matched with the Edelbrock Performer Power Package
  • 1.90 in. intake valves are for use with stock pistons
  • Exhaust valve is 1.60 in.
  • 60cc combustion with 170cc intake port
  • Flat Tappet Camshaft Type
See More

Edelbrock – Small-Block Ford E-Street Cylinder Heads 1.90" (Part No.5023)

Small-Block Ford E-Street Cylinder Heads 1.90"

from

$1408.99
The Edelbrock #5023 E-Street cylinder heads are designed for Ford 289-351 W V8 applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for e

Product Features:
  • Complete Pair
  • 60cc Combustion Chamber Volume
  • 170cc Intake/60cc Exhaust Runner Volume
  • 1.9 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Edelbrock – RPM Small-Block Ford 2.02" Cylinder Head Hydraulic Flat Tappet Cam (Part No.60259)

RPM Small-Block Ford 2.02" Cylinder Head Hydraulic Flat Tappet Cam

from

$1001.99
The Edelbrock #60259 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60259 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th

Product Features:
  • Out-of-the-Box Bolt-On Performance
  • Maximum Performance From Idle through Mid-Range
  • Intake Valves Are For Use w/Stock Pistons
  • Designed For Non-Emissions
See More

Spartan – Engine Cylinder Head; Ford 4.6 98-99 RGT Head (Part No.2FXF)

Engine Cylinder Head; Ford 4.6 98-99 RGT Head

from

$532.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7313)

Cylinder Head Gasket Set for Ford

from

$61.99
Product Features:
  • Cylinder Head Gasket
  • 1963-1996 289-302 (except boss)-351w; 1982-1996 5L
See More

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5807G)

Ultra Seal: Head Gasket

from

$75.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.100 inch, Compressed thickness 0.038 inch

Product Features:
  • Five layer (graphite core/perforated steel outer layers) composite construction
  • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
  • Provides excellent stability, compressibility and high temperature endurance
  • Coated with high temperature silicone to ensure sealing of engine fluids
  • Will not brinell (indent) aluminum cylinder heads
  • For high performance street, drag race and oval track use
  • Compatible w/High Octane Fuel
  • Compatible With Exotic Fuel
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26483 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26482 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$83.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8548 PT-2)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

2001 Lincoln Town Car Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 2001 Lincoln Town Car. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 17 different Valve Cover and Cylinder Heads in our inventory ranging from $8.49 to $618.99. That means you can find the exact parts or products you need to keep that 2001 Lincoln Town Car running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2001 Lincoln Town Car. Sealed Power, Felpro, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2001 Lincoln Town Car, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2001 Lincoln Town Car rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 2001 Lincoln Town Car Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2001 Lincoln Town Car demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Town Car the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Top 2001 Lincoln Town Car Valve Cover and Cylinder Heads from Sealed Power

Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 2001 Lincoln Town Car. Popular Sealed Power parts include:
Engine Valve Lifter
from $10.49
(32)
Engine Valve Lifter
Engine Valve Lifters

FAQs for 2001 Lincoln Town Car Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 2001 Lincoln Town Car?

Out of 17 Valve Cover and Cylinder Heads for the 2001 Lincoln Town Car, the most popular in our inventory are:
Engine Rocker Arm
from $20.99
This product is not rated
Engine Rocker Arm
Rocker Arms
Rubber Expansion Plug 1-1/2 In. - Size Range 1-1/2 In. - 1-5/8 In. (sold by each)
from $8.49
This product is not rated
Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each)
Rocker Arm Shaft Plugs
Engine Cylinder Head Temperature Sensor
from $34.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors