2001 GMC Sierra 2500 HD Belts and Hoses

Essential 2001 GMC Sierra 2500 HD Belts and Hoses

Dorman – OE Fix Stainless Steel Fuel Line: 97" Long (Part No.919-841)

OE Fix Stainless Steel Fuel Line: 97" Long

from

$452.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:
  • Upgraded replacement – the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance
  • Pre-formed fit – these lines are already shaped to fit specific applications for easier installation
  • Complete kit – includes brackets and fittings for thorough repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Heater Hose (Part No.R30301097886DOR)

Heater Hose

from

$64.70
Heater Hose

ACDelco – AT Cooling Hose (Part No.J2000576930ACD)

AT Cooling Hose

from

$60.79
AT Cooling Hose

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38006)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$32.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dorman – Lower Radiator Hose O-Ring (Part No.926-161)

Lower Radiator Hose O-Ring

from

$19.99
The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:
  • Simple fix – this O-ring is specifically manufactured to replace the original lower radiator hose O-ring on specific vehicles
  • Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring
  • Application specific – made to match the original O-ring on certain Chevrolet and GMC vehicles
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Help – Coolant Hose Junction (Part No.47157)

Coolant Hose Junction

from

$29.99
Fixing a failed original plastic coolant hose connector usually requires replacing the entire coolant hose assembly. This Dorman OE FIX coolant hose connector is made from aluminum for greater durability and saves expense by allowing the replacement of just the failed connector..

Product Features:
  • Saves money – directly replace a failed coolant hose connector rather than buying an entire new hose assembly from the original automaker.
  • Improved design – made of durable aluminum instead of plastic to better resist temperature fluctuations and help prevent future failures
  • Ensures fit – includes hose clamps for a complete repair and perfect fit on specified makes, models and years
  • Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dayco – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.5040378)

Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count

from

$38.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 36.5" Long, 2" Diameter (Part No.E72348)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 36.5" Long, 2" Diameter

from

$303.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 76.3 mm Diameter (Part No.419-623)

Idler/Tensioner Pulley: Specific Fit, Steel, 76.3 mm Diameter

from

$16.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000102185BAN)

Multi Rib (Serpentine) Belt

from

$41.54
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dorman – Left Diesel Return Line (Part No.904-123)

Left Diesel Return Line

from

$107.99
This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware for a complete installation.

Product Features:
  • Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
  • Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
  • Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
  • Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership
See More

Felpro – Multi-Purpose O-Ring (Part No.35759)

Multi-Purpose O-Ring

from

$1.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6.50" Long, .63" Diameter (Part No.B71231)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6.50" Long, .63" Diameter

from

$9.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

GM Genuine Parts – Crankcase Vent Hose (Part No.12556932)

Crankcase Vent Hose

from

$47.99
GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Heater Hose Connector (Part No.800-916)

Heater Hose Connector

from

$13.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221078DAY)

Dayco, Acc. Belt Idler Pulley

from

$22.67
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Dorman – Engine Oil Cooler Lines (Part No.625-209)

Engine Oil Cooler Lines

from

$106.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:
  • Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
  • Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
  • Easy to install – no special tools required
  • Quality tested – rigorous quality control ensure this hose assembly conforms to product standards
See More

Dorman – Engine Oil Cooler Line (Part No.625-167)

Engine Oil Cooler Line

from

$47.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:
  • Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
  • Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
  • Easy to install – no special tools required
  • Quality tested – rigorous quality control ensure this hose assembly conforms to product standards
See More

Gates – Premium Molded Coolant Hose (Part No.23227)

Premium Molded Coolant Hose

from

$25.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.75" Diameter (Part No.E72273)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.75" Diameter

from

$27.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dorman – Windshield Washer Hose (Part No.924-251)

Windshield Washer Hose

from

$30.49
This windshield washer hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this windshield washer hose is designed to match the fit and function of the original hose on specified vehicles
  • Restores functionality – reliable replacement for an original hose that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Front Wiper Hose (Part No.924-379)

Front Wiper Hose

from

$60.99
This windshield washer hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this windshield washer hose is designed to match the fit and function of the original hose on specified vehicles
  • Restores functionality – reliable replacement for an original hose that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Gates – Premium Molded Coolant Hose (Part No.22698)

Premium Molded Coolant Hose

from

$24.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 32.5" Long, 1.31" Diameter (Part No.E72882)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 32.5" Long, 1.31" Diameter

from

$124.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 Inch Length (Part No.87770)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 Inch Length

from

$9.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot) (Part No.28410)

Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot)

from

$3.29
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60930K1)

Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set

from

$99.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:
  • Custom engineered to cover 35 million problem drive vehicles in operation
  • Designed as an improvement over OE to address problematic drive systems
  • Features a specially designed serpentine belt with specific compounds that mitigate noise
See More

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999034A)

Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys

from

$51.99
This Litens Serpentine Belt Drive Component Kit fits 1999-2009 Cadillac Escalade / Chev Avalanche, Express, Silverado, Suburban, Tahoe / GMC Savana, Sierra, Yukon w/4.8/5.3/6.0/6.2L (AC Drive). These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. This kit contains a Litens belt tensioner and a Bando serpentine belt. All required hardware is included for the installation . Application specific instructions are also conveniently included. The tensioner in this kit has an improved design with a premium bearing, improved corrosion resistance, and an increase in belt tension which will lead to less noise and slip. These features were not available on the original part. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • All-in-one solution to get the whole job done right the first time
  • Eliminate the guess-work by repairing the whole system.
  • Front end accessory drive components wear together. Replace all of the components for added piece of mind.
  • A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
  • Worn tensioners and idlers can cut belt life in half.
See More

2001 GMC Sierra 2500 HD Belts and Hoses

You count on your 2001 GMC Sierra 2500 HD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 147 Belts and Hoses ranging in price from $1.49 to $589.99, you’re sure to find everything you need for your 2001 GMC Sierra 2500 HD.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 14 different brands like Dayco, Litens, and Driveworks. 2001 GMC Sierra 2500 HD Belts and Hoses start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 13,179 extensive product reviews on 2001 GMC Sierra 2500 HD Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count with 4.4 stars and Serpentine Idler/Tensioner Pulley; Polymer, 76mm Dia., 28.7mm Width, 6 Grooves with 4.4 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2001 GMC Sierra 2500 HD below to get started!

Top-Rated Belts and Hoses Brands For Your 2001 GMC Sierra 2500 HD

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 GMC Sierra 2500 HD running right for years to come. In our inventory you’ll find brands like Dayco, Litens, Driveworks, and even more.

Popular Felpro Belts and Hoses

You’ll find popular Felpro brand products across Radiator Hoses. All are waiting to get your 2001 GMC Sierra 2500 HD back on the road. Some of the top-rated Felpro products in these categories are:
Multi-Purpose O-Ring
from $1.79
(1)
Multi-Purpose O-Ring
Engine Coolant Hose Connector Seals

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2001 GMC Sierra 2500 HD, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count
from $38.49
(288)
Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count
Serpentine Belts

FAQs for 2001 GMC Sierra 2500 HD Belts and Hoses

What are the most purchased Belts and Hoses for the 2001 GMC Sierra 2500 HD?

Out of 147 Belts and Hoses for the 2001 GMC Sierra 2500 HD, the most popular in our inventory are:

What are the top-rated 2001 GMC Sierra 2500 HD Belts and Hoses?

Top-rated Belts and Hoses for your 2001 GMC Sierra 2500 HD based on customer reviews/ratings are: