2001 Ford Expedition Belts and Hoses

Name: Quick-Lok Heater Hose Connector
Brand: Gates
SKU: 28501
Price: 29.99 USD

Below you will find various in-demand Ford Belts and Hoses, components and accessories for your 2001 Expedition. Advance Auto Parts has popular Expedition parts like Pulleys, Belt Tensioners, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Expedition model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2001 Ford Expedition Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2001 Ford Expedition Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Heater Hose Fittings

Engine Oil Cooler Hoses

HVAC Heater Pipe Lines

Fuel Filler Hoses

Transmission Oil Cooler Hoses

Essential Belts and Hoses for 2001 Ford Expeditions

from

$29.99

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

It is used in cars and trucks when the original quick connector fails or the replacement hose does not include it.
Manufactured with a new design that retains the O-ring so that they are not lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$37.99

Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$25.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$56.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$30.49

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$55.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$35.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.99

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

Resistant to electrochemical degradation and water permeation
Use with heating pipe connectors and bulk heating hoses to create custom assemblies
Compatible for coolant, air, and water applications
EPDM tube and lid, reinforced with synthetic fibers
SAE 20R3 CE Class D1, SAE 20R4 CE Class D1
temperature range Deg. F to +275 degrees F (-40 degrees C to +135 degrees C)
Caution: Do not use for fuel or oil transfer applications

from

$3.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$20.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$96.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$102.99

Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:

Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models
Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$54.99

Ideal replacement – this PCV tubing replaces the original hose on specified vehicle years, makes and models
Durable materials – this PCV hose is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$31.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$46.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$65.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$72.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$149.99

This Litens Serpentine Belt Drive Component Kit fits 2002-2006 Ford E-150, E-250 E-350, E-450, Super Duty Van w4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time.
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape.
Worn tensioners and idlers can cut belt life in half.

from

$126.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$32.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals and other contaminants that can be found under the hood
Original equipment quality that fits virtually any domestic or imported vehicle on the market
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
High-quality bearings eliminate noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$38.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$160.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$74.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic T-connector. This Dorman OE FIX replacement features an upgraded aluminum T-connector to prevent similar failures in the future.

Product Features:

Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$26.99

Rein Automotive OE quality heater hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$132.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, the main cause of casing failure
EPDM tube; synthetic fiber knit reinforcement, EPDM cover resistant to heat, ozone and chemical refrigerants.
Manufactured using exact hose components from the Original Manufacturer (quick connects, branch/T connectors, sensors, etc.)
Compliant with SAE 20R3 EC Class D1 for sizes less than 25 mm (1 in.) ID, and SAE 20R4 EC Class D1 for sizes 25 mm (1 in.) ID and above
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

Upgrade your 2001 Ford Expedition with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2001 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Belts and Hoses for the 2001 Ford Expedition, designed to meet your needs without breaking the bank. From Pulley replacements to Belt Tensioners upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2001 Ford Expedition at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $208.99, with an average price of $54.87. Our 45 Belts and Hoses in stock come from 7 trusted brands, so you’re sure to find the right part for your 2001 Ford Expedition without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Ford Expedition, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Dorman, Driveworks, and more. Dayco Belts and Hoses start at just $46.99 and boast an impressive 4.5 stars average rating from customers. Dorman and Driveworks also bring quality to the table, with Belts and Hoses available starting at $26.99, and at an average 4.2 stars rating. With 1,432 customer reviews and counting, our 2001 Ford Expedition Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place. Start shopping confidently below for your 2001 Ford Expedition!

Best-Selling Pulleys for 2001 Ford Expeditions

Enhance the driving experience in your Ford with 8 quality Pulley components, starting at $15.99.

show more show less

from

$46.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$26.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$51.99

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$45.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
Original equipment quality that fits virtually any domestic or imported vehicle on the market
The bearings meet or exceed Original Equipment standards with application-specific speed and load requirements, to withstand high temperatures under the bell housing
Premium bearings eliminate bearing noise
Mounting hardware included for some common applications
Reliable operation under severe conditions

from

$24.99

This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$32.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals and other contaminants that can be found under the hood
Original equipment quality that fits virtually any domestic or imported vehicle on the market
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
High-quality bearings eliminate noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$20.79

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$15.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Fitted with a high-quality NTN/NSK brand bearing for smooth operation and long life
Guaranteed fitment
Manufactured to OE idler pulley dimensions for proper clearances and belt alignment
High-strength alloy or composite pulley construction withstands brutal engine heat and vibration
Durable surface coating resists corrosion (metal models)

Most Popular 2001 Ford Expedition Belt Tensioners

Customize your Ford with 2 Belt Tensioners products like Belt Tensioner Assemblies, all priced under $65.99.

show more show less

from

$61.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$65.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

Top Picks for 2001 Ford Expedition Heater Hoses

Upgrade Ford Expeditions with top-quality Heater Hoses parts, including 18 OEM and aftermarket selections for your 2001 model.

show more show less

from

$51.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$29.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$61.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$51.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$30.49

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$53.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$44.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$19.79

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

It is used in cars and trucks when the original quick connector fails or the replacement hose does not include it.
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fits like the original quick-connect fittings for easy installation and removal

from

$14.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$44.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$106.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$22.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$132.99

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, the main cause of casing failure
EPDM tube; synthetic fiber knit reinforcement, EPDM cover resistant to heat, ozone and chemical refrigerants.
Manufactured using exact hose components from the Original Manufacturer (quick connects, branch/T connectors, sensors, etc.)
Compliant with SAE 20R3 EC Class D1 for sizes less than 25 mm (1 in.) ID, and SAE 20R4 EC Class D1 for sizes 25 mm (1 in.) ID and above
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$21.29

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$20.49

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$119.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$97.99

Materials specifically designed to resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with hose components conforming to OEM standards (quick couplings, branch fittings, sensors, etc.)
Meets SAE 20R3 EC Class D1 for diameters below 25 mm (1 inch), SAE 20R4 EC Class D1 for diameters of 25 mm (1 inch) and larger
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

In-Demand Serpentine and V Belts for 2001 Ford Expeditions

Select from 3 premium Serpentine and V Belts parts for your 2001 Ford Expedition, with prices ranging from $26.99 to $118.99.

show more show less

from

$49.99

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$26.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$118.99

This Litens Serpentine Belt Drive Component Kit fits 1997-2001 Ford Expedition / Lincoln Navigator w/4.6/5.4L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time.
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape.
Worn tensioners and idlers can cut belt life in half.

Most Sold 2001 Ford Expedition Radiator Hoses

Explore our best-selling Ford parts for the 2001 Expedition among 4 OEM and aftermarket options starting from $3.79.

show more show less

from

$54.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$70.99

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
EPDM tube; synthetic fiber knit reinforcement, EPDM cover resistant to heat, ozone and chemical refrigerants.
Manufactured using exact hose components from the Original Manufacturer (quick connects, branch/T connectors, sensors, etc.)
Compliant with SAE 20R3 EC Class D1 for sizes less than 25 mm (1 in.) ID, and SAE 20R4 EC Class D1 for sizes 25 mm (1 in.) ID and above
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.99

Resistant to electrochemical degradation and water permeation
Use with heating pipe connectors and bulk heating hoses to create custom assemblies
Compatible for coolant, air, and water applications
EPDM tube and lid, reinforced with synthetic fibers
SAE 20R3 CE Class D1, SAE 20R4 CE Class D1
temperature range Deg. F to +275 degrees F (-40 degrees C to +135 degrees C)
Caution: Do not use for fuel or oil transfer applications

from

$3.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

Top-Rated Belts and Hoses Brands For Your 2001 Ford Expedition

Shop for the best-rated brands offering Belts and Hoses and other products for your 2001 Ford Expeditions. Below you’ll find some of our best rated Belts and Hoses from Dayco, Dorman, and Driveworks, and more. Belts and Hoses from these brands that fit a 2001 Expedition start at just $26.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2001 Ford Expedition Belts and Hoses

When it comes to maintaining or upgrading your 2001 Ford Expedition, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2001 Ford Expedition. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $46.99, with an average price of just $49.66. Plus, with over 124 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $49.99

(16)

Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty

“Great”

from $51.99

(12)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length

“Fit perfectly”

from $46.99

(96)

Idler Pulley, Dayco

“fit as it should”

Popular Dorman 2001 Ford Expedition Belts and Hoses

Dorman auto parts is one of the highest quality Belts and Hose brands in the market. Any 2001 Ford Expedition owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2001 Expedition, Advance Auto Parts carries a full inventory of 2 Dorman Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Belts and Hoses range from $54.99 to $61.99, plus, with more than 5 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $54.99

(1)

Positive Crankcase Ventilation Emissions Hose

“Great part.”

from $61.99

(4)

Molded Heater Hose: Steel

“It fit great and no leaks! Bracket and bolt holes lined up perfect.”

FAQs for 2001 Ford Expedition Belts and Hoses

Which Belts and Hoses are best-sellers for 2001 Ford Expeditions?

Out of 45 Belts and Hoses that fit 2001 Ford Expeditions, the following parts are the top sellers:

Transmission Oil Cooler Hose (5670022) – $32.49
Safety Stripe Standard Straight Heater Hose (Sold by foot) (10504844) – $2.49
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (20590061) – $51.99

What’s the price range for 2001 Ford Expedition Belts and Hoses?

Belts and Hose prices for the 2001 Ford Expedition start at $2.49 and go up to $208.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2001 Ford Expedition?

The average price for Belts and Hoses for the 2001 Ford Expedition is $54.87. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford Expedition model years?

Yes, we currently carry Belts and Hoses for 27 model years of Ford Expeditions between 1997 and 2025. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2001 Ford Expedition?

The cheapest 2001 Ford Expedition Belts and Hoses we carry in stock are:

Safety Stripe Standard Straight Heater Hose (Sold by foot) (10504844) – $2.49
Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505038) – $3.79
Coolant Fitting (11851432) – $14.99
Acc. Belt Idler Pulley, 77mm OD x 10mm ID x 37mm (50200775) – $15.99
Quick-Lok Heater Hose Connector (10911688) – $19.79

What are the top-rated Belts and Hoses that fit the 2001 Ford Expedition?

Out of 1,432 reviews by customers, our 2001 Ford Expedition Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2001 Ford Expedition and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (12025533) – $26.99
- Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (19270426) – $49.99
Engine Cooling Hoses
- Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (12025533) – $26.99
- Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (19270426) – $49.99
Belt Tensioners
- Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (12025533) – $26.99
- Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (19270426) – $49.99

What types of Belts and Hoses do you sell for my 2001 Ford Expedition?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 2001 Ford Expedition:

Can I get help with 2001 Ford Expedition Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford Expedition Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford Expedition Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Ford Expedition Belts and Hoses

Gates – Quick-Lok Heater Hose Connector (Part No.28501)

Dorman – Fuel Filler Neck Hose (Part No.573-167)

Dayco – Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (Part No.4PK932EE)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 29.5" Long, 1.50" Diameter (Part No.E72500)

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

Dorman – Engine Heater Hose Assembly (Part No.626-222)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 1.75" Diameter (Part No.E71901)

Gates – Premium Molded Coolant Hose (Part No.22858)

Gates – Molded 90 Degree Heater Hose (Part No.28466)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E72254)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.50" Diameter (Part No.E72640)

Dorman – Help – Positive Crankcase Ventilation Emissions Hose (Part No.46831)

Dorman – Help – Positive Crankcase Ventilation Emissions Hose (Part No.46087)

Dayco – Idler Pulley, Dayco (Part No.89006)

Dayco – Idler Pulley, Dayco (Part No.89048)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999266A)

Dorman – Automatic Belt Tensioner (Part No.419-067)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999544A)

Dayco – Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 5 Piece Set (Part No.5061030K1)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38023)

Dayco – Idler Pulley, Dayco (Part No.89130)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Dorman – Engine Oil Cooler Line (Part No.625-202)

Dorman – HEATER HOSE (Part No.626-838)

Rein – Heater Hose (Part No.CHH0789)

Gates – Premium Modular Coolant Hose (Part No.22513)

Dayco – Idler Pulley, Dayco (Part No.89048)

Dayco – Idler Pulley, Dayco (Part No.89016)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900007A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38022)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900005A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38023)

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 90 mm Diameter (Part No.419-605)

URO Parts – Acc. Belt Idler Pulley, 77mm OD x 10mm ID x 37mm (Part No.C2C22758)

Dayco – Automatic Belt Tensioner (Part No.89237)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999266A)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (Part No.87793)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (Part No.87756)

Dorman – Molded Heater Hose: Steel (Part No.626-221)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 11 Inch Length (Part No.87755)

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

Dorman – Molded Heater Hose: Steel (Part No.626-517)

Dorman – Molded Heater Hose: Rubber (Part No.626-219)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28409)

Gates – Quick-Lok Heater Hose Connector (Part No.28500)

Dorman – Coolant Fitting (Part No.626-571)

Dorman – Engine Heater Hose Assembly (Part No.626-222)

Dorman – Molded Heater Hose: Rubber (Part No.626-218)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 Inch Length (Part No.87828)

Gates – Premium Modular Coolant Hose (Part No.22513)

Dayco – Molded Heater Hose; EPDM Rubber, 9/16 Inch Diameter, 6 Inch Length (Part No.86820)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 15 1/2 Inch Length (Part No.87906)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 16 1/2 Inch Length (Part No.87976)

Gates – Premium Modular Coolant Hose (Part No.22538)

Dayco – Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (Part No.5080980)

Driveworks – Poly Rib Belt HD Serpentine Belt; 98.03 Long, 8 Rib Count, Heavy Duty (Part No.980K8)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999266A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.72" Diameter (Part No.E71962)

Gates – Premium Modular Coolant Hose (Part No.22295)

Gates – Molded 90 Degree Heater Hose (Part No.28466)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)