2001 Ford Crown Victoria Body Parts

Below you will find various in-demand Ford Body Parts, components and accessories for your 2001 Crown Victoria. Advance Auto Parts has popular Crown Victoria parts like Vehicle Latches and Handles, Vehicle Doors, Vehicle Hoods and more. You’ll also find aftermarket and OEM Body Parts for other Crown Victoria model years including 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 and more. Select a category of 2001 Ford Crown Victoria Body Parts below and start saving instantly.

Popular 2001 Ford Crown Victoria Body Parts Categories

Bumper Deflectors

Tailgate Latch Rod Clips

Door Hinge Pin Kits

Power Window Motor Gear Plugs

Door Striker Bolts

Window Regulators

Lift Supports

Running Boards and Steps

Grilles

Bumper Cover Moldings

Fender Apron and Inner Fenders

Door Lock Motors

Window Lift Gear Kits

Hood Panels

Exterior Door Handles

Interior Door Handles

Front Bumper Covers

Fenders

Mirror Switches

Rocker Panel Molding Retainers

Door Seals

Mirrors

Door Mirror Glass Assemblies

Trunk Lining Retainers

Fuel Filler Door Lock Actuators

Door Lock Switches

Fender Splash Shields

Window Regulator Repair Kits

Mirror Replacement Glass

Door Interior Trim Panel Retainers

Front End Covers

Door Window Switch Connectors

Power Window Switch Connectors

Door Courtesy Lamp Connectors

Convertible Top Hydraulic Fluids

Essential Body Parts for 2001 Ford Crown Victorias

from

$13.99

This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability & reliable performance.

Product Features:

Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$85.99

PENTOSIN ATF 44 5L

from

$15.99

New Standard Replacement Bumper, Deflector, Front, Lower

Product Features:

Deflector, Front, Lower, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$29.99

This replacement power window motor gear matches the dimensions of the original part. It restores power window operation when the original gear has become stripped and is made of quality materials for reliable service.

Product Features:

Ideal replacement – this power window motor gear matches the original part on specified vehicle years, makes and models
Durable construction – made of quality materials for reliable service
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone try-on and lifecycle testing to ensure a quality fit and long service life

from

$32.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Black, With Horizontal Bars. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Black, With Horizontal Bars, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
Original equipment quality, fit and function
Includes Backing Plate
Step-by-step instructions for easy installation

from

$537.99

New Economy Replacement Passenger Side Fender

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$56.43

Without Electric Motor The WORLD SOURCEONE Power Window line includes window regulators and motor-regulator assemblies that are competitively priced against remanufactured units and do not require a core trade-in. All WSO window regulators and regulator-motor assemblies come complete and ready for easy installation. The OE quality means increased installer confidence with fewer comebacks. Coverage includes European, and Asian passenger cars and light trucks.

Product Features:

Superior, reliable performance compared to competitive products
Identical to OE for simplified installation and no comebacks
Durable construction including long life motors, gears, cables and case
Factory original equipment connectors
No additional time consuming steps needed for installation
Vehicle specific fit and function
Manufactured in ISO Certified facilities

from

$9.99

Dorman’s Power Window Motor Gear Plug is manufactured for cost-saving convenience. Save time, money and labor by replacing only the plug-instead of the entire gear assembly.

Product Features:

Restores motor gear to proper operation
Direct replacement for a proper fit every time
Includes all plugs needed for complete repair
Quality-tested for a trouble-free performance

from

$50.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$29.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$118.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Left Front Door Seal (Drivers Side). For 4-Door Sedan. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$636.99

New Economy Replacement Hood Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$41.49

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$48.99

from

$23.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$8.99

This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$47.99

New, Standard Replacement Rear Bumper Cover Molding, Chrome, Plastic, Base/LX Models [Approximately 1/2In Tall And Rounded]

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Or Modifications Needed For Installation
Same Form Fit As OE

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$13.49

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 4 1/8″ tall by 7 1/8″ wide and 7 1/2″ diagonally
This glass fits Mirrors with Manual function only
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$2.79

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$466.99

New Standard Replacement Front Bumper Cover, Paint To Match

Product Features:

Paint To Match, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

New Standard Replacement Passenger Side Front Apron

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$51.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Upgrade your 2001 Ford Crown Victoria with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2001 Ford Crown Victoria, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Body Parts are key to keeping your Crown Victoria functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Body Parts for the 2001 Ford Crown Victoria, designed to meet your needs without breaking the bank. From Vehicle Latches and Handle replacements to Vehicle Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2001 Ford Crown Victoria at great prices. Our Body Parts inventory for this model ranges from just $0.99 to $636.99, with an average price of $63.90. Our 79 Body Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2001 Ford Crown Victoria without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Ford Crown Victoria, we stock popular OEM and aftermarket Body Parts from top names like StrongArm, Dorman, Auto Ventshade (AVS), and more. StrongArm Body Parts start at just $11.49 and boast an impressive 4.5 stars average rating from customers. Dorman and Auto Ventshade (AVS) also bring quality to the table, with Body Parts available starting at $57.99, and at an average 4.2 stars rating. With 854 customer reviews and counting, our 2001 Ford Crown Victoria Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Ford Crown Victoria is always ready to roll. We’re committed to providing you with everything you need to keep your Crown Victoria in top shape, all in one place. Start shopping confidently below for your 2001 Ford Crown Victoria!

Best-Selling Vehicle Latches and Handles for 2001 Ford Crown Victorias

Enhance the driving experience in your Ford with 7 quality Vehicle Latches and Handle components, starting at $6.99.

show more show less

from

$6.99

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$55.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$50.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$47.99

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$33.49

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$32.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$32.99

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Most Popular 2001 Ford Crown Victoria Vehicle Doors

Customize your Ford with 14 Vehicle Doors products like Door Hinge Pin Kits, Door Lock Motors, and Door Striker Bolts, all priced under $227.99.

show more show less

from

$49.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$13.99

This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability & reliable performance.

Product Features:

Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.99

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$129.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Door Seal. Fits rear left side. Each.

Product Features:

Jet black to match the color of the original part
Dual durometer rubber to match the original
Exact fit
High quality original equipment replacement part

from

$52.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$227.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Door Seal. Fits rear right side. Each.

Product Features:

Jet black to match the color of the original part
Dual durometer rubber to match the original
Exact fit
High quality original equipment replacement part

from

$118.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Right Front Door Seal (Passenger Side). For 4-Door Sedan. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$118.99

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$88.93

Door Lock Actuator

from

$80.99

from

$37.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$32.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$2.79

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 2001 Ford Crown Victoria Vehicle Hoods

Upgrade Ford Crown Victorias with top-quality Vehicle Hoods parts, including 6 OEM and aftermarket selections for your 2001 model.

show more show less

from

$11.49

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$17.99

New Standard Replacement Hood Lift Support

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$636.99

New Economy Replacement Hood Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.84

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

Restores the original opening and closing speeds of your hood, hatch or trunk
Easy-to-install
No special tools required
Engineered for your application
Easy lifting and reduced closing effort
Consistent lifting force through 50,000 cycles
Rust-resistant piston rod extends product life
Dynamic damping technology, available on select lift supports

from

$17.53

Hood Strut

from

$17.41

Hood Strut

In-Demand Bodies and Fender Parts for 2001 Ford Crown Victorias

Select from 9 premium Bodies and Fender Parts parts for your 2001 Ford Crown Victoria, with prices ranging from $0.99 to $537.99.

show more show less

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$2.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$537.99

New Economy Replacement Passenger Side Fender

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$29.99

New Standard Replacement Passenger Side Front Apron

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

New Standard Replacement Driver Side Front Apron

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

SPLASH SHLD COWL RET

from

$0.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Most Sold 2001 Ford Crown Victoria Vehicle Windows

Explore our best-selling Ford parts for the 2001 Crown Victoria among 19 OEM and aftermarket options starting from $8.99.

show more show less

from

$79.99

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$96.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$37.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$41.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$39.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$40.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$31.49

Ideal replacement – this power window motor gear matches the original part on specified vehicle years, makes and models.
Durable construction – made of quality materials for reliable service.
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone try-on and lifecycle testing to ensure a quality fit and long service life

from

$8.99

Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$91.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$29.99

Ideal replacement – this power window motor gear matches the original part on specified vehicle years, makes and models
Durable construction – made of quality materials for reliable service
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone try-on and lifecycle testing to ensure a quality fit and long service life

from

$83.12

Window Regulator w/

from

$75.42

Window Regulator w/

from

$73.01

Window Regulator

from

$66.00

Superior, reliable performance compared to competitive products
Identical to OE for simplified installation and no comebacks
Durable construction including long life motors, gears, cables and case
Factory original equipment connectors
No additional time consuming steps needed for installation
Vehicle specific fit and function
Manufactured in ISO Certified facilities

from

$57.22

Superior, reliable performance compared to competitive products
Identical to OE for simplified installation and no comebacks
Durable construction including long life motors, gears, cables and case
Factory original equipment connectors
No additional time consuming steps needed for installation
Vehicle specific fit and function
Manufactured in ISO Certified facilities

from

$56.43

Superior, reliable performance compared to competitive products
Identical to OE for simplified installation and no comebacks
Durable construction including long life motors, gears, cables and case
Factory original equipment connectors
No additional time consuming steps needed for installation
Vehicle specific fit and function
Manufactured in ISO Certified facilities

from

$53.72

Window Regulator

from

$46.67

Window Regulator

from

$42.11

Superior, reliable performance compared to competitive products
Identical to OE for simplified installation and no comebacks
Durable construction including long life motors, gears, cables and case
Factory original equipment connectors
No additional time consuming steps needed for installation
Vehicle specific fit and function
Manufactured in ISO Certified facilities

Top-Rated Body Parts Brands For Your 2001 Ford Crown Victoria

Shop for the best-rated brands offering Body Parts and other products for your 2001 Ford Crown Victorias. Below you’ll find some of our best rated Body Parts from StrongArm, Dorman, and Auto Ventshade (AVS), and more. Body Parts from these brands that fit a 2001 Crown Victoria start at just $11.49 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 2001 Ford Crown Victoria Body Parts

When it comes to maintaining or upgrading your 2001 Ford Crown Victoria, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2001 Ford Crown Victoria. With over 1 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49. Plus, with over 9 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.49

(9)

Hood Lift Support: 13.38" Ext Length, 4.5" Travel, 127 Lbs of Force, 1 Pk

“Installation was quick and holds the hood up again.”

Popular Dorman 2001 Ford Crown Victoria Body Parts

Dorman auto parts is one of the highest quality Body Part brands in the market. Any 2001 Ford Crown Victoria owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2001 Crown Victoria, Advance Auto Parts carries a full inventory of 3 Dorman Body Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Body Parts range from $57.99 to $96.99, plus, with more than 16 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from $57.99

(1)

Fuel Door Release Switch

“Love it works perfect in my Crown Victoria”

from $79.99

(14)

Window Regulator & Motor Assembly: Power, 1 Pack

“fit great works great”

from $96.99

(1)

Window Regulator & Motor Assembly: Power, 1 Pack

“I like that it had all the bolts and nuts with the regulator to bolt it to the door and the bolt the window to the regulator.”

FAQs for 2001 Ford Crown Victoria Body Parts

Which Body Parts are best-sellers for 2001 Ford Crown Victorias?

Out of 79 Body Parts that fit 2001 Ford Crown Victorias, the following parts are the top sellers:

Chrysler, GM Panel Retainer (11910838) – $4.49
PENTOSIN ATF 44 5L (12164991) – $85.99
Door Hinge Pin And Bushing Kit – 1 Pin, 2 Bushings And 1 Clip (9110163) – $13.99

What’s the price range for 2001 Ford Crown Victoria Body Parts?

Body Part prices for the 2001 Ford Crown Victoria start at $0.99 and go up to $636.99 for the most premium parts.

What’s the average price of a Body Part for a 2001 Ford Crown Victoria?

The average price for Body Parts for the 2001 Ford Crown Victoria is $63.90. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Ford Crown Victoria model years?

Yes, we currently carry Body Parts for 18 model years of Ford Crown Victorias between 1992 and 2011. Body Parts are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, and 2003.

What are the cheapest Body Parts for my 2001 Ford Crown Victoria?

The cheapest 2001 Ford Crown Victoria Body Parts we carry in stock are:

Nylon Shield Retainer- Ford and GM (Sold by each) (10916178) – $0.99
Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In (Sold by each) (22142091) – $1.29
Panel Trim Retainer – Interior – Ford (5701074) – $1.79
Nylon Shield Retainer (11224109) – $2.49
Door Hinge Pin And Bushing Kit – 2 Pins, 4 Bushings, 2 Clips (sold by each) (22149631) – $2.79

What are the top-rated Body Parts that fit the 2001 Ford Crown Victoria?

Out of 854 reviews by customers, our 2001 Ford Crown Victoria Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2001 Ford Crown Victoria and their top-rated products:

Vehicle Windows
- Window Regulator & Motor Assembly: Power, 1 Pack (10041025) – $96.99
- Window Regulator & Motor Assembly: Power, 1 Pack (10041040) – $79.99
- Window Regulator: Power, 1 Pack (19160122) – $41.99
Vehicle Hoods
- Window Regulator & Motor Assembly: Power, 1 Pack (10041025) – $96.99
- Window Regulator & Motor Assembly: Power, 1 Pack (10041040) – $79.99
- Window Regulator: Power, 1 Pack (19160122) – $41.99

What types of Body Parts do you sell for my 2001 Ford Crown Victoria?

As of 4/10/25, these are some of the most in-demand types of Body Parts for a 2001 Ford Crown Victoria:

Can I get help with 2001 Ford Crown Victoria Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Body Parts and more.

What is your return policy for Ford Crown Victoria Body Parts?

Advance Auto Parts keeps returns simple. For new Ford Crown Victoria Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Ford Crown Victoria Body Parts

Needa Parts – Door Striker Bolt, M10-1.50 (Part No.38445)

Pentosin – PENTOSIN ATF 44 5L (Part No.1058212)

KAI – Bumper Deflector (Part No.FO1092179)

Carquest Premium – Door Lock Actuator (Part No.DLE1261)

Dorman – Help – Window Regulator Gear (Part No.74409)

KAI – New Standard Replacement Grille, Black, With Horizontal Bars (Part No.FO1200379)

K-Source – Passenger Car Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.80048)

KAI – Fender (Part No.FO1241188V)

WSO – Power Window Regulator (Part No.O3040369262WSO)

Dorman – Help – Window Regulator Gear Plugs (Part No.74410)

Dorman – Help – Exterior Door Handle Rear Right Smooth Black Lever Textured Black Housing (Part No.90719)

Burco – Side View Replacement Mirror (Part No.3627)

Metro Mould – Door Seal (Part No.LM 451)

KAI – Hood Panel (Part No.FO1230181V)

Dorman – Help – Interior Door Handle Front Or Rear Right Chrome Lever Stone Housing (Part No.90870)

Carquest Premium – Door Lock Switch (Part No.SBA2192)

StrongArm – Hood Lift Support: 14.3" Ext Length, 3.21" Travel, 119 Lbs of Force, 1 Pk (Part No.E4467)

Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

KAI – Rear Bumper Cover Molding, Made Of Plastic (Part No.FO1157244)

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

K-Source – Passenger Car Replacement Glass: Driver Side, Flat Glass, Includes Mounting Tape and Instructions (Part No.99048)

Dorman – Door Hinge Pin And Bushing Kit – 2 Pins, 4 Bushings, 2 Clips (sold by each) (Part No.703-270)

Carquest Premium – Connector (Part No.PTC1475)

KAI – Bumper Cover (Part No.FO1000455)

KAI – Fender Apron (Part No.FO1247110)

Le Bra – Front End Cover (Part No.55749-01)

Carquest Premium – Door Lock Switch Connector (Part No.PTC2677)

Dorman – Help – Door Lock Rod Clips (Part No.75450)

Dorman – Help – Exterior Door Handle Front Left Smooth Black Lever Textured Black Housing (Part No.90718)

Dorman – Help – Exterior Door Handle Rear Right Smooth Black Lever Textured Black Housing (Part No.90719)

Dorman – Help – Interior Door Handle Front Or Rear Right Beige (Part No.90872)

Dorman – Help – Exterior Door Handle Front Left All Black (Part No.82113)

Dorman – Help – Exterior Door Handle Front Right All Black (Part No.82115)

Dorman – Help – Interior Door Handle (Part No.79514)

Dorman – Door Lock Actuator, Front or Back (Part No.746-145)

Needa Parts – Door Striker Bolt, M10-1.50 (Part No.38445)

Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pin, 2 Bushings And 1 Clip (Part No.38438)

Dorman – Panel Trim Retainer – Interior – Ford (Part No.45650)

Metro Mould – Door Seal (Part No.LM 460)

Dorman – Door Lock Actuator, Front or Back (Part No.746-159)

Metro Mould – Door Seal (Part No.LM 461)

Metro Mould – Door Seal (Part No.LM 450)

Metro Mould – Door Seal (Part No.LM 451)

Motorcraft – Door Lock Actuator (Part No.O3003463869MTR)

Carquest Premium – Door Lock Switch (Part No.PDA1054)

Carquest Premium – Center High Mount Stop Light Connector (Part No.PTA2679)

Carquest Premium – 4WD Control Switch Connector (Part No.PTA1843)

Dorman – Door Hinge Pin And Bushing Kit – 2 Pins, 4 Bushings, 2 Clips (sold by each) (Part No.703-270)

StrongArm – Hood Lift Support: 13.38" Ext Length, 4.5" Travel, 127 Lbs of Force, 1 Pk (Part No.E4550)

KAI – Hood Lift Support (Part No.FO1237106)

KAI – Hood Panel (Part No.FO1230181V)

Stabilus – Gas Charged Trunk Strut (Part No.O2064307988STB)

Autopart International Inc – Hood Strut (Part No.O20202207576API)

Stabilus – Hood Strut (Part No.O2020371400STB)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

Dorman – Nylon Shield Retainer (Part No.963-230)

KAI – Fender (Part No.FO1241188V)

Le Bra – Front End Cover (Part No.55749-01)

KAI – Fender Apron (Part No.FO1247110)

KAI – Fender Apron (Part No.FO1246110)

Dorman – SPLASH SHLD COWL RET (Part No.963-230D)

Dorman – Nylon Shield Retainer- Ford and GM (Sold by each) (Part No.700-614)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-664)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-679)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-664)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-665)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-679)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-678)

Dorman – Window Lift Motor Gear Kit (Part No.747-409)

Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-678)

Dorman – Help – Window Regulator Gear (Part No.74409)

Autopart International Inc – Window Regulator w/ (Part No.O30521954474API)

Autopart International Inc – Window Regulator w/ (Part No.O30521904977API)

Autopart International Inc – Window Regulator (Part No.O30402018706API)

WSO – Power Window Regulator (Part No.O3040369261WSO)

World Source One – Power Window Regulator (Part No.O3040369260WSO)