2000 Jeep Wrangler Performance and Racing Products

Essential Performance and Racing Products for 2000 Jeep Wranglers

Energy Suspension – Body Mount Set (Part No.2.4108R)

Body Mount Set

from

$268.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39515)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$345.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
See More

Energy Suspension – Coil Spring Isolator Set (Part No.2.6108R)

Coil Spring Isolator Set

from

$54.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12092-1)

Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow

from

$428.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • 360 deg. Radial Flow Air Filter
  • Pre-Oiled Media
  • 5.5 in. 360 deg. Air Filter
  • Dyno Tested Intake Tube
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

MSD Ignition – Coil; Chrysler Late Model; 90-96 (Part No.8228)

Coil; Chrysler Late Model; 90-96

from

$72.09
When it comes to late model performance parts nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. The MSD blaster coils is a direct replacement for late model dodges.

Product Features:
  • Direct performance replacement for late model Dodge vehicles
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
  • Improved mid range RPM power
  • Connect to factory wiring
  • Use PN 8877 harness for direct plug in install
See More

Energy Suspension – Hyper-Flex System (Part No.2.18106G)

Hyper-Flex System

from

$673.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Hyper-Flex System (Part No.2.18107G)

Hyper-Flex System

from

$543.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Control Arm Bushing Set (Part No.2.3106G)

Control Arm Bushing Set

from

$111.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Trans Mount: Urethane-Chevy

from

$84.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:
  • Durable Polyurethane
  • Absorbs Vibration
  • Last Longer Than Rubber
  • Built-In Safety Lock
See More

Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)

High Performance Transmission Mount for Street & Racing Vehicles

from

$41.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Omix – Tie Rod Assembly (Part No.18052.05)

Tie Rod Assembly

from

$99.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Includes Tube; Ends And Hardware
  • OE Style
  • Direct Fit
See More

Omix – Tie Rod Assembly (Part No.18052.04)

Tie Rod Assembly

from

$102.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Includes Tube; Ends And Hardware
  • OE Style
  • Direct Fit
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7102G)

Track Arm Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7102R)

Track Arm Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Control Arm Bushing Set (Part No.2.3107R)

Control Arm Bushing Set

from

$112.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – Control Arm Bushing Set (Part No.2.3106R)

Control Arm Bushing Set

from

$112.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1514-1)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter (Part No.57-1521)

Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Rugged Ridge – Skid Plate (Part No.DMC-16597.44)

Skid Plate

from

$184.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles and

Product Features:
  • Black Powder Coated
  • 3/16 in. Steel
  • Use w/ Factory Diff Cover
  • Mounting Hardware Included
  • Jeep Logo
See More

Rugged Ridge – Skid Plate (Part No.18003.40)

Skid Plate

from

$164.99
The Evaporator Skid Plate is constructed of durable 3/16 Inch thick black powder coated steel, and mounts to existing body holes using the factory hardware. It helps transfer the load of an impact away from the evaporator tank and to the frame.

Product Features:
  • Black Powdercoated
  • 3/16 in. Steel
  • Easy to Install
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5102R)

Sway Bar Bushing Set

from

$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5110G)

Sway Bar Bushing Set

from

$31.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)

Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.952462)

60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$185.99
The 60 series incorporates Flowmaster’s patented Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Spectre – Diff Cover Dana 30 (Part No.6081)

Diff Cover Dana 30

from

$52.99
Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and fits 1999-2003 Dodge Dakota/Durango four wheel drive front, 1966-1970 Ford Bronco four wheel drive front, 1941-2003 Jeep CJ front, 1960-1974 IHC Scout front, and 1960-1967 IHC Scout rear differentials. Includes 10 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
  • Bolts and gasket included
  • Triple chrome plated for a lasting shine
  • Precision engineered for a perfect fit
See More

Rancho – rockGEAR Differential Cover (Part No.RS6209)

rockGEAR Differential Cover

from

$222.99
Designed to shield your differential from direct contact in severe off-road conditions, the Rancho® rockGEAR® differential cover for the Jeep® Wrangler TJ and JK is manufactured from high-strength nodular iron for added axle and internal gear protection.

Product Features:
  • COMPATIBILITY — Fits Jeep Wrangler TJ and JK, Dana 44
  • BUILT FOR THE TRAIL — Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
  • ADDED PROTECTION — Mounts to Dana 44 differential for added axle and internal gear protection
  • EXTRA STRENGTH — Ribbed external construction for added strength
  • RESISTS CORROSION — Durable red powder-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — High-strength ductile iron steel construction for added axle and internal gear protection
  • ACCESS FOR FILLING — Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
See More

Upgrade your 2000 Jeep Wrangler with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2000 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Performance and Racing Products for the 2000 Jeep Wrangler, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2000 Jeep Wrangler at great prices. Our Performance and Racing Products inventory for this model ranges from just $13.99 to $794.99, with an average price of $189.80. Our 28 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2000 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N Accel, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. With 441 customer reviews and counting, our 2000 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2000 Jeep Wrangler!

Best-Selling Performance Ignition Products for 2000 Jeep Wranglers

Enhance the driving experience in your Jeep with 1 quality Performance Ignition Product components, starting at $72.39.

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

High-Performance Ignition Coil - Direct OE Fit

from

$72.39
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Uf-198
  • MSD 8228
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Most Popular 2000 Jeep Wrangler Performance Oil Filters

Customize your Jeep with 1 Performance Oil Filters products like Performance Oil Filters, all priced under $17.99.

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Top Picks for 2000 Jeep Wrangler Performance Steering Products

Upgrade Jeep Wranglers with top-quality Performance Steering Products parts, including 9 OEM and aftermarket selections for your 2000 model.

Energy Suspension – Sway Bar Bushing Set (Part No.2.5111R)

Sway Bar Bushing Set

from

$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7102R)

Track Arm Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Body Mount Set (Part No.2.4107G)

Body Mount Set

from

$136.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5110G)

Sway Bar Bushing Set

from

$31.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Body Mount Set (Part No.2.4108R)

Body Mount Set

from

$268.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Body Mount Set (Part No.2.4107R)

Body Mount Set

from

$129.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7102G)

Track Arm Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7103R)

Track Arm Bushing Set

from

$21.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Body Mount Set (Part No.2.4108G)

Body Mount Set

from

$266.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

In-Demand Performance Exhaust Products for 2000 Jeep Wranglers

Select from 2 premium Performance Exhaust Products parts for your 2000 Jeep Wrangler, with prices ranging from $185.99 to $794.99.

Flowmaster Inc. – 60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.952462)

60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$185.99
The 60 series incorporates Flowmaster’s patented Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15855)

Street Series Cat-Back Performance Exhaust System

from

$794.99
The MagnaFlow 2000-2006 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15855 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15855 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Most Sold 2000 Jeep Wrangler Performance Air Intake Kits

Explore our best-selling Jeep parts for the 2000 Wrangler among 3 OEM and aftermarket options starting from $199.99.

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1514-1)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9050)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

aFe POWER – Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76202)

Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance

from

$454.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:
  • 1-Piece Housing
  • 5 Layer Performance Air Filter
  • Premium Hardware
See More

Top-Rated Performance and Racing Products Brands For Your 2000 Jeep Wrangler

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2000 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from K&N and Accel, and more. Performance and Racing Products from these brands that fit a 2000 Wrangler start at just $17.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2000 Jeep Wrangler Performance and Racing Products

When it comes to maintaining or upgrading your 2000 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2000 Jeep Wrangler. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $183.99. Plus, with over 144 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
from
$349.99

(24)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

“The horsepower increase was tremendous for accelerating while entering highways. Still waiting to see what type of fuel mileage increase there will b”

Popular Accel 2000 Jeep Wrangler Performance and Racing Products

Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2000 Jeep Wrangler owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 2000 Wrangler, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $72.39, plus, with more than 18 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

High-Performance Ignition Coil - Direct OE Fit
from
$72.39

(18)

High-Performance Ignition Coil – Direct OE Fit

“Great coil for my 5.9 magnum block noticed a big difference in performance!!”

FAQs for 2000 Jeep Wrangler Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2000 Jeep Wranglers?

Out of 28 Performance and Racing Products that fit 2000 Jeep Wranglers, the following parts are the top sellers:

What’s the price range for 2000 Jeep Wrangler Performance and Racing Products?

Performance and Racing Product prices for the 2000 Jeep Wrangler start at $13.99 and go up to $794.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2000 Jeep Wrangler?

The average price for Performance and Racing Products for the 2000 Jeep Wrangler is $189.80. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?

Yes, we currently carry Performance and Racing Products for 36 model years of Jeep Wranglers between 1987 and 2024. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 2000 Jeep Wrangler?

The cheapest 2000 Jeep Wrangler Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 2000 Jeep Wrangler?

Out of 441 reviews by customers, our 2000 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2000 Jeep Wrangler and their top-rated products:

What types of Performance and Racing Products do you sell for my 2000 Jeep Wrangler?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 2000 Jeep Wrangler:

Can I get help with 2000 Jeep Wrangler Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

What is your return policy for Jeep Wrangler Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.