2000 Jeep Wrangler Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Performance and Racing Products for 2000 Jeep Wranglers

K&N – K&N Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter, 57-1553 (Part No.57-1553)

K&N Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter, 57-1553

from

$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More

Energy Suspension – Energy Suspension Sway Bar Bushing Set – 19 mm, 2.5113R (Part No.2.5113R)

Energy Suspension Sway Bar Bushing Set - 19 mm, 2.5113R

from

$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

MagnaFlow – MagnaFlow Off Road Pro Series Cat-Back Performance Exhaust System, 17125 (Part No.17125)

MagnaFlow Off Road Pro Series Cat-Back Performance Exhaust System, 17125

from

$456.99
The MagnaFlow Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System brings additional off-roading prowess and our deep signature exhaust note to your 2.5L, 4.0L Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17125 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17125’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17125 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.
See More

Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5110R (Part No.2.5110R)

Energy Suspension Sway Bar Bushing Set, 2.5110R

from

$34.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

MSD Ignition – MSD Ignition Ignition Coil, Mitsubishi / Dodge, 1996-On, 8239 (Part No.8239)

MSD Ignition Ignition Coil, Mitsubishi / Dodge, 1996-On, 8239

from

$132.99
MSD offers these 4-tower coils as higher performance replacements for a variety of years ranging from 1994-2003 on vehicles from Dodge/Plymouth/Chrysler/Mitsubishi/Eagle/Jeep.
See More

Dynomax – Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17748 (Part No.17748)

Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17748

from

$111.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
See More

aFe POWER – aFe POWER Momentum GT Cold Air Intake: Gain up to 9% More Airflow With Dry Air Filter For Easy Maintenance, 50-70001D (Part No.50-70001D)

aFe POWER Momentum GT Cold Air Intake: Gain up to 9% More Airflow With Dry Air Filter For Easy Maintenance, 50-70001D

from

$435.99
“A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 5″” flange and is 9″” tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.”
See More

Energy Suspension – Energy Suspension Body Mount Set, 2.4108R (Part No.2.4108R)

Energy Suspension Body Mount Set, 2.4108R

from

$283.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
See More

Yukon Gear – Yukon Gear 1330 Lifetime U/Joint, 42004 (Part No.42004)

Yukon Gear 1330 Lifetime U/Joint, 42004

from

$53.99
“1330 Yukon Lifetime U/Joint. 3.625″” snap ring span, 1.062″” cap diameter. Outside snap ring.”
See More

Energy Suspension – Energy Suspension Control Arm Bump Stop Set, 2.9101R (Part No.2.9101R)

Energy Suspension Control Arm Bump Stop Set, 2.9101R

from

$41.49
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. The low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
See More

Airaid – AIRAID Throttle Body Spacer, 310-511 (Part No.310-511)

AIRAID Throttle Body Spacer, 310-511

from

$146.99
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air And contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque And improved mid-range power.
See More

Rugged Ridge – Rugged Ridge Skid Plate, DMC-16597.30 (Part No.DMC-16597.30)

Rugged Ridge Skid Plate, DMC-16597.30

from

$191.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 in. black powder coated steel, these skid plates will help you slide over obstacles and not get hung up. Includes replacement mounting hardware and instructions. Now available with the Jeep logo stamped into the face as an Authentic Jeep Licensed product.
See More

Russell – Russell Hydraulic Hose Kit, 695950 (Part No.695950)

Russell Hydraulic Hose Kit, 695950

from

$119.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available – ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
See More

RT Offroad – "RT Offroad Stainless Steel Brake Hose Kit, Left & Right, Front & Rear, Up To 6"" Lift, RT31015" (Part No.RT31015)

"RT Offroad Stainless Steel Brake Hose Kit, Left & Right, Front & Rear, Up To 6"" Lift, RT31015"

from

$147.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications include Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
See More

Rancho – Rancho RockGEAR Differential Cover, RS6209 (Part No.RS6209)

Rancho RockGEAR Differential Cover, RS6209

from

$231.99
Designed to shield your differential from direct contact in severe off-road conditions, the Rancho rockGEAR differential cover for the Jeep Wrangler TJ and JK is manufactured from high-strength nodular iron for added axle and internal gear protection.
See More

Energy Suspension – Energy Suspension Track Arm Bushing Set, 2.7106G (Part No.2.7106G)

Energy Suspension Track Arm Bushing Set, 2.7106G

from

$46.49
Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy’s proprietary Hyper-Flex material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.
See More

Energy Suspension – Energy Suspension Track Arm Bushing Set, 2.7101G (Part No.2.7101G)

Energy Suspension Track Arm Bushing Set, 2.7101G

from

$19.29
Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy’s proprietary Hyper-Flex material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.
See More

Energy Suspension – Energy Suspension Control Arm Bushing Set, 2.3107R (Part No.2.3107R)

Energy Suspension Control Arm Bushing Set, 2.3107R

from

$126.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
See More

Energy Suspension – Energy Suspension Control Arm Bushing Set – Rear, 2.3109R (Part No.2.3109R)

Energy Suspension Control Arm Bushing Set - Rear, 2.3109R

from

$136.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
See More

Flowmaster Inc. – Flowmaster Inc. 60 Delta Flow Muffler – 2.25 Center In – 2.25 Offset Out – Mild Sound, 952462 (Part No.952462)

Flowmaster Inc. 60 Delta Flow Muffler - 2.25 Center In - 2.25 Offset Out - Mild Sound, 952462

from

$199.99
The 60 series incorporates Flowmaster’s Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Flowmaster Inc. Super 44 Muffler – 2.25 Center In – 2.25 Offset Out – Aggressive Sound, 942447 (Part No.942447)

Flowmaster Inc. Super 44 Muffler - 2.25 Center In - 2.25 Offset Out - Aggressive Sound, 942447

from

$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Energy Suspension – Energy Suspension Hyper-Flex System, 2.18107R (Part No.2.18107R)

Energy Suspension Hyper-Flex System, 2.18107R

from

$594.99
Energy’s Hyper-Flex is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy’s Hyper-Flex components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex components are proudly Made in America and are available in red or black.
See More

Energy Suspension – Energy Suspension Hyper-Flex System, 2.18101G (Part No.2.18101G)

Energy Suspension Hyper-Flex System, 2.18101G

from

$390.99
Energy’s Hyper-Flex is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy’s Hyper-Flex components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex components are proudly Made in America and are available in red or black.
See More

Top Street Performance – Top Street Performance Black Aluminum Low-profile Retro-fit LS 5.5 Quart Oil Pan., 81073BK (Part No.81073BK)

Top Street Performance Black Aluminum Low-profile Retro-fit LS 5.5 Quart Oil Pan., 81073BK

from

$277.99
LS engines are among the most popular for swaps for their low expense and great power potential. Unfortunately, stock LS oil pans can’t always fit where you want them to. That’s where TSP’s low-profile, retro fit oil pan comes in. Composed of lightweight cast aluminum, it is designed to allow for increased clearance to the ground and chassis. It will fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. Meticulously designed, it will mount perfectly to any wet-sump LS engine and take the stock oil filter. Volume: 5 quarts.
See More

Top Street Performance – Top Street Performance LS Aluminum Rear Sump Low-Profile Retro-Fit Oil Pan – Polished, 81073P (Part No.81073P)

Top Street Performance LS Aluminum Rear Sump Low-Profile Retro-Fit Oil Pan - Polished, 81073P

from

$455.99
LS engines are among the most popular for swaps for their low expense and great power potential. Unfortunately, stock LS oil pans can’t always fit where you want them to. That’s where TSP’s low-profile, retro fit oil pan comes in. Composed of lightweight cast aluminum, it is designed to allow for increased clearance to the ground and chassis. It will fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. Meticulously designed, it will mount perfectly to any wet-sump LS engine and take the stock oil filter.
See More

Energy Suspension – Energy Suspension Coil Spring Isolator Set, 2.6101R (Part No.2.6101R)

Energy Suspension Coil Spring Isolator Set, 2.6101R

from

$32.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
See More

Energy Suspension – Energy Suspension Coil Spring Isolator Set, 2.6103R (Part No.2.6103R)

Energy Suspension Coil Spring Isolator Set, 2.6103R

from

$58.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
See More

Upgrade your 2000 Jeep Wrangler with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2000 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Performance and Racing Products for the 2000 Jeep Wrangler, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Steering Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2000 Jeep Wrangler at great prices. Our Performance and Racing Products inventory for this model ranges from just $15.49 to $594.99, with an average price of $204.69. Our 32 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 2000 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names like Spectre, Accel, Airaid, and more. Spectre Performance and Racing Products start at just $212.99 and boast an impressive 4.2 stars average rating from customers. Accel and Airaid also bring quality to the table, with Performance and Racing Products available starting at $84.99, and at an average 4.1 stars rating. With 33 customer reviews and counting, our 2000 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2000 Jeep Wrangler!

Best-Selling Performance Engines for 2000 Jeep Wranglers

Enhance the driving experience in your Jeep with 1 quality Performance Engine components, starting at $146.99.

Airaid – AIRAID Throttle Body Spacer, 310-511 (Part No.310-511)

AIRAID Throttle Body Spacer, 310-511

from

$146.99
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air And contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque And improved mid-range power.
See More

Most Popular 2000 Jeep Wrangler Performance Steering Products

Customize your Jeep with 6 Performance Steering Products products like Performance Sway Bar Link Kits, Performance Sway Bar Bushings, and Performance Body Mounts, all priced under $283.99.

Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5110R (Part No.2.5110R)

Energy Suspension Sway Bar Bushing Set, 2.5110R

from

$34.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

Energy Suspension – Energy Suspension Body Mount Set, 2.4107G (Part No.2.4107G)

Energy Suspension Body Mount Set, 2.4107G

from

$142.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
See More

Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5110G (Part No.2.5110G)

Energy Suspension Sway Bar Bushing Set, 2.5110G

from

$34.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

Energy Suspension – Energy Suspension Body Mount Set, 2.4108R (Part No.2.4108R)

Energy Suspension Body Mount Set, 2.4108R

from

$283.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
See More

Energy Suspension – Energy Suspension Body Mount Set, 2.4107R (Part No.2.4107R)

Energy Suspension Body Mount Set, 2.4107R

from

$142.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
See More

Energy Suspension – Energy Suspension Track Arm Bushing Set, 2.7102G (Part No.2.7102G)

Energy Suspension Track Arm Bushing Set, 2.7102G

from

$15.49
Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy’s proprietary Hyper-Flex material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.
See More

Top Picks for 2000 Jeep Wrangler Performance Mufflers

Upgrade Jeep Wranglers with top-quality Performance Mufflers parts, including 1 OEM and aftermarket selections for your 2000 model.

Flowmaster Inc. – Flowmaster Inc. 60 Delta Flow Muffler – 2.25 Center In – 2.25 Offset Out – Mild Sound, 952462 (Part No.952462)

Flowmaster Inc. 60 Delta Flow Muffler - 2.25 Center In - 2.25 Offset Out - Mild Sound, 952462

from

$199.99
The 60 series incorporates Flowmaster’s Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

In-Demand Performance Ignition Products for 2000 Jeep Wranglers

Select from 1 premium Performance Ignition Products parts for your 2000 Jeep Wrangler.

Accel – Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual – This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep… (Part No.140021)

Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual - This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep...

from

$84.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
See More

Most Sold 2000 Jeep Wrangler Performance Exhaust Products

Explore our best-selling Jeep parts for the 2000 Wrangler among 2 OEM and aftermarket options starting from $184.99.

Dynomax – Dynomax Ultra Flo Exhaust Muffler 2.25 Inch Inlet ID 2.25 Inch Outlet ID, 17217 (Part No.17217)

Dynomax Ultra Flo Exhaust Muffler 2.25 Inch Inlet ID 2.25 Inch Outlet ID, 17217

from

$184.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
See More

MagnaFlow – MagnaFlow Off Road Pro Series Cat-Back Performance Exhaust System, 17122 (Part No.17122)

MagnaFlow Off Road Pro Series Cat-Back Performance Exhaust System, 17122

from

$497.99
The MagnaFlow Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System brings additional off-roading prowess and our deep signature exhaust note to your 2.4L, 2.5L, 4.0L Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17122 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17122’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17122 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.
See More

Top-Rated Performance and Racing Products Brands For Your 2000 Jeep Wrangler

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2000 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from Spectre, Accel, and Airaid, and more. Performance and Racing Products from these brands that fit a 2000 Wrangler start at just $84.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Spectre 2000 Jeep Wrangler Performance and Racing Products

When it comes to maintaining or upgrading your 2000 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Spectre ticks all of those boxes. We offer a wide selection of Spectre Performance and Racing Products, specifically designed for the 2000 Jeep Wrangler. With over 1 Spectre brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $212.99. Plus, with over 2 customer reviews and an average rating of 4.2 stars, you can trust that our Spectre Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Spectre Air Intake Kit, 9940
from $199.99
(2)
Spectre Air Intake Kit, 9940
“Easy to install”

Popular Accel 2000 Jeep Wrangler Performance and Racing Products

Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2000 Jeep Wrangler owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 2000 Wrangler, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $84.99, plus, with more than 18 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual - This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep...
from $84.99
(18)
Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual – This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep…
“Great coil for my 5.9 magnum block noticed a big difference in performance!!”

FAQs for 2000 Jeep Wrangler Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2000 Jeep Wranglers?

Out of 32 Performance and Racing Products that fit 2000 Jeep Wranglers, the following parts are the top sellers:

What’s the price range for 2000 Jeep Wrangler Performance and Racing Products?

Performance and Racing Product prices for the 2000 Jeep Wrangler start at $15.49 and go up to $594.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2000 Jeep Wrangler?

The average price for Performance and Racing Products for the 2000 Jeep Wrangler is $204.69. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?

Yes, we currently carry Performance and Racing Products for 37 model years of Jeep Wranglers between 1987 and 2026. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 2000 Jeep Wrangler?

The cheapest 2000 Jeep Wrangler Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 2000 Jeep Wrangler?

Out of 33 reviews by customers, our 2000 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2000 Jeep Wrangler and their top-rated products:

What types of Performance and Racing Products do you sell for my 2000 Jeep Wrangler?

As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 2000 Jeep Wrangler:

Can I get help with 2000 Jeep Wrangler Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

What is your return policy for Jeep Wrangler Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.