2000 Jeep Grand Cherokee Steering and Chassis Parts

Name: Magnum Steering Damper
Brand: Monroe
SKU: SC2928
Price: 62.99 USD
Rating: 4.5 (84 reviews)

Below you will find various in-demand Jeep Steering and Chassis Parts, components and accessories for your 2000 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Power Steering Parts, Tie Rods, Gear Boxes and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Grand Cherokee model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2000 Jeep Grand Cherokee Steering and Chassis Parts below and start saving instantly.

Popular 2000 Jeep Grand Cherokee Steering and Chassis Parts Categories

Power Steering Coolers

Steering Gear Box

Suspension Ball Joint Kits

Center Tie Rod Ends

Steering Drag Link Adjusting Sleeves

Power Steering Filters

Tie Rod Ends

Tie Rod End Sleeves

Center and Drag Links

Drive Shaft CV Joints

Suspension Stabilizer Bars

Tie Rod End Repair Kits

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Power Steering Pump Caps

Power Steering Pump Kits

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Steering Drag Link Ends

Sway Bar Bushings

Track Bar Bushings

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Steering Gear Box Seals

Power Steering Reservoir Hoses

Power Steering Pump Seal Kits

Suspension Stabilizer Bar Brackets

Essential Steering and Chassis Parts for 2000 Jeep Grand Cherokees

from

$62.99

Designed for trucks, vans, and SUVs, and CUVs, the Monroe Magnum steering stabilizer helps reduce vibrations that travel through the steering system before they get to the driver, improving control and driver fatigue in all driving conditions.

Product Features:

REDUCES VIBRATION – Ideal for trucks, vans, SUVs, and CUVs, it helps reduce vibrations that travel through the steering system before they get to the driver to improve control and cut down on driver fatigue in all driving conditions
CONSISTENT PERFORMANCE – All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
STRONG AND DURABLE – Sintered iron piston and .50-in. nitrocarburized piston rod for enhanced durability and long service life
EXCEPTIONAL HANDLING – Full displaced valving delivers better valving range on both compression and extension cycles for consistent performance
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas without excessive wear or friction
MOUNTS HORIZONATALLY – Micro-cellular gas design allows the unit to be mounted horizontally without impacting performance for improved steering control

from

$43.99

In this black front control arm bushing kit, polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components. Precision fabrication ensures a perfect fit. Holds super grease for quiet

Product Features:

Black Polyurethane
Fluid and Road Grime Resistant
Better Handling and Control
Long-lasting
Limited 5 Year Warranty

from

$49.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Easy to install.
Construction and design validated by MOOG engineers
Restores like-new steering and handling
Designed to meet or exceed original equipment performance
Broad coverage for foreign and domestic applications
Engineered to provide long life and dependability

from

$17.29

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$99.99

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:

Includes Tube; Ends And Hardware
OE Style
Direct Fit

from

$127.99

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$19.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$3.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$55.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Coated for corrosion resistance
Alloy steel construction provides durability
Includes any necessary hardware

from

$67.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$99.99

TIE ROD END

from

$31.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.79

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$226.99

This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$31.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$46.99

from

$118.99

This suspension track bar is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment track bar on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$213.99

This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.

Product Features:

Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone testing to ensure a quality fit and long service life

from

$56.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$22.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$31.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$67.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$50.99

Power Steering Reservoir

from

$80.99

from

$149.99

PS COOLER

from

$611.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

from

$7.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Upgrade your 2000 Jeep Grand Cherokee with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 124 Steering and Chassis Parts for the 2000 Jeep Grand Cherokee, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2000 Jeep Grand Cherokee at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $3.29 to $829.99, with an average price of $106.40. Our 124 Steering and Chassis Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 2000 Jeep Grand Cherokee without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Jeep Grand Cherokee, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, DriveWorks, and more. Moog Steering and Chassis Parts start at just $21.49 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and DriveWorks also bring quality to the table, with Steering and Chassis Parts available starting at $20.49, and at an average 4.4 stars rating. With 2,680 customer reviews and counting, our 2000 Jeep Grand Cherokee Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place. Start shopping confidently below for your 2000 Jeep Grand Cherokee!

Best-Selling Power Steering Parts for 2000 Jeep Grand Cherokees

Enhance the driving experience in your Jeep with 43 quality Power Steering Part components, starting at $3.29.

show more show less

from

$38.49

from

$20.49

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$96.99

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$39.99

from

$38.99

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$46.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$31.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$158.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$28.49

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$131.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$8.79

from

$3.29

from

$6.99

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$37.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$52.99

Most Popular 2000 Jeep Grand Cherokee Tie Rods

Customize your Jeep with 15 Tie Rods products like Tie Rod Ends, Center Tie Rod Ends, and Tie Rod End Sleeves, all priced under $136.99.

show more show less

from

$37.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$35.49

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$35.49

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$43.99

Driveworks tie rod ends are high-quality, cost-effective parts. Replace tie rod ends to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts help ensure improved steering response and durability.

from

$49.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$49.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$49.49

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$61.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$81.99

Coated for corrosion resistance
Alloy steel construction provides durability
Includes any necessary hardware

from

$127.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$54.99

Limited 12 Month Or 12,000 Mile Warranty

from

$136.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$124.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$114.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$66.99

Complete with clamps
Used to set Toe in or out
replaces rusted or corroded sleeves
Used to connect inner and outer tie rod ends

Top Picks for 2000 Jeep Grand Cherokee Gear Boxes

Upgrade Jeep Grand Cherokees with top-quality Gear Boxes parts, including 3 OEM and aftermarket selections for your 2000 model.

show more show less

from

$199.99

The steering gear box is the heart of the vehicle’s steering system. It guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.

Product Features:

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$67.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$65.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Dampens Vibration
Oil Filled
OE Style
Direct Fit
Limited 5 Year Warranty

In-Demand Ball Joints for 2000 Jeep Grand Cherokees

Select from 27 premium Ball Joints parts for your 2000 Jeep Grand Cherokee, with prices ranging from $38.99 to $829.99.

show more show less

from

$111.99

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$94.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$38.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$57.99

Product Features:

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$99.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$143.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler, Jeep and Dodge. Our applications include Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Heavy Duty Replacement Of Factory Ball Joints
Heavy Duty Sintered Metallic Bushings
Greaseable Assembly
Sold In Sets (Must Order two sets to complete one front axle)

from

$121.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$157.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Premium forged housing with increased cross section of up to 52% more material in key areas
Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$195.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$132.99

Ball Joint kit for Dana 30 Super. This replaces Spicer part number 707488X.

Product Features:

Ball joint kit
Fits Dana Spicer Super 30

from

$119.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$829.99

Full Ball Stud Pitman Arm end
Greaseable
Self aligning no bind design
Low friction

from

$779.99

Upper Ball Joint is a revolutionary load carrying Ball Joint
Lower Ball Joint utilizes a 32mm powdered metal load carrying bearing
Lower, Hexad grease delivery system
Lower, replaceable low profile dust boot
Upper, Utilizes tapered roller bearing
Upper, LM76 PTFE lined fiberglass epoxy bearing
Upper, greaseable
Upper and Lower are U.S. made

from

$519.99

Full Ball Stud Pitman Arm end
Greaseable
Self aligning no bind design
Low friction

from

$429.99

Full Ball Stud Pitman Arm end
Greaseable
Self aligning no bind design
Low friction

from

$279.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$239.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$211.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$209.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$199.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$169.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$139.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$94.99

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$87.99

OVERSIZED FOR TIGHT FIT — Designed with a larger outer diameter to ensure a tight fit in a worn receptacle
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purposeááááááááá

Most Sold 2000 Jeep Grand Cherokee Sway Bars

Explore our best-selling Jeep parts for the 2000 Grand Cherokee among 13 OEM and aftermarket options starting from $7.99.

show more show less

from

$30.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$41.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$21.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$36.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$30.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$27.99

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$49.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$81.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$52.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$31.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$19.99

Designed to fit a 22mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$14.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$7.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Top-Rated Steering and Chassis Parts Brands For Your 2000 Jeep Grand Cherokee

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2000 Jeep Grand Cherokees. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and DriveWorks, and more. Steering and Chassis Parts from these brands that fit a 2000 Grand Cherokee start at just $20.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2000 Jeep Grand Cherokee Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Jeep Grand Cherokee, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2000 Jeep Grand Cherokee. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.49, with an average price of just $33.32. Plus, with over 11 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $21.49

(4)

Suspension Stabilizer Bar Bushing Kit

“Great”

from $41.99

(4)

Stabilizer Bar Link

“These fit perfectly and took care of the clunking noisw coming from the rear suspension on my Grand Cherokee. These do not come with any hardware. I”

from $36.49

(3)

Suspension Stabilizer Bar Link

“Perfect fit, improved my driving.”

Popular Carquest Premium 2000 Jeep Grand Cherokee Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2000 Jeep Grand Cherokee owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2000 Grand Cherokee, Advance Auto Parts carries a full inventory of 3 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $20.49 to $96.99, plus, with more than 28 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $38.49

(21)

Power Steering Pressure Hose Assembly, 16mm Long Male "O" Ring x 18mm Male "O" Ring

“excellent fit”

from $20.49

(2)

Power Steering Repair Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube

“Well made… and cheap.”

from $96.99

(5)

Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring

“Worked fine.”

FAQs for 2000 Jeep Grand Cherokee Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2000 Jeep Grand Cherokees?

Out of 124 Steering and Chassis Parts that fit 2000 Jeep Grand Cherokees, the following parts are the top sellers:

3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $8.79
New Power Steering Filter (10417593) – $32.99
3/8" ID Return Hose (sold by each) (18070570) – $3.29

What’s the price range for 2000 Jeep Grand Cherokee Steering and Chassis Parts?

Steering and Chassis Part prices for the 2000 Jeep Grand Cherokee start at $3.29 and go up to $829.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2000 Jeep Grand Cherokee?

The average price for Steering and Chassis Parts for the 2000 Jeep Grand Cherokee is $106.40. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Jeep Grand Cherokee model years?

Yes, we currently carry Steering and Chassis Parts for 29 model years of Jeep Grand Cherokees between 1993 and 2023. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2000 Jeep Grand Cherokee?

The cheapest 2000 Jeep Grand Cherokee Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (sold by each) (18070570) – $3.29
11/32" ID Return Hose (J189) (sold by each) (18071176) – $6.99
Power Steering Filter (50167394) – $7.99
Black, Metal (50074421) – $7.99
3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $8.79

What are the top-rated Steering and Chassis Parts that fit the 2000 Jeep Grand Cherokee?

Out of 2,680 reviews by customers, our 2000 Jeep Grand Cherokee Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2000 Jeep Grand Cherokee and their top-rated products:

Tie Rods
- Tie Rod End (15510753) – $37.99
- Steering Tie Rod End (15510751) – $35.49
- Steering Tie Rod End (20515934) – $49.99
Drive Shafts
- Tie Rod End (15510753) – $37.99
- Steering Tie Rod End (15510751) – $35.49
- Steering Tie Rod End (20515934) – $49.99
Steering Hardware
- Tie Rod End (15510753) – $37.99
- Steering Tie Rod End (15510751) – $35.49
- Steering Tie Rod End (20515934) – $49.99

What types of Steering and Chassis Parts do you sell for my 2000 Jeep Grand Cherokee?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2000 Jeep Grand Cherokee:

Can I get help with 2000 Jeep Grand Cherokee Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Steering and Chassis Parts and more.

What is your return policy for Jeep Grand Cherokee Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Jeep Grand Cherokee Steering and Chassis Parts

Monroe – Magnum Steering Damper (Part No.SC2928)

Rugged Ridge – Track Bar Bushing (Part No.1-1204BL)

MOOG – Suspension Ball Joint (Part No.K500372)

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8777)

Omix – Tie Rod Assembly (Part No.18052.05)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52088463K)

Crown Auto Jeep Replacmnt – Plastic (Part No.4897287AA)

Crown Auto Jeep Replacmnt – OE Replacement, Steel (Part No.J3200501)

MOOG – Steering Drag Link Adjusting Sleeve (Part No.DS1453S)

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8763)

Rare Parts – TIE ROD END (Part No.RP28206)

Dorman – Power Steering Pump Pulley (Part No.300-310)

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Dorman – Propeller Shaft CV Joint Kit (Part No.932-301)

National – Bearing Race (Part No.M86610)

Powercraft – Steering Gear Major Seal Kit (Part No.8521)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

Dorman – Suspension Track Bar (Part No.905-541)

Dorman – Sway Bar (Part No.927-158)

MOOG – Tie Rod End (Part No.ES3094L)

MOOG – Suspension Stabilizer Bar Link Kit (Part No.K700528)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES3094L)

Powercraft – Pump Complete Rebuild Kit (Part No.8900)

PWR – Power Steering Reservoir (Part No.88-1024)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37172)

Edelmann – PS COOLER (Part No.58019)

Lares – New Power Steering Gear Box (Part No.11353)

Crown Auto Jeep Replacmnt – Black, Metal (Part No.52087865AB)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Long Male "O" Ring x 18mm Male "O" Ring (Part No.35309)

Carquest Premium – Power Steering Repair Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.35021)

Cardone – Power Steering Filter (Part No.20-0058F)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37173)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36184)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Dorman – Power Steering Pump Pulley (Part No.300-310)

Cardone – Remanufactured Power Steering Pump (Part No.20-61607)

Carquest Premium – 11/32" I.D. Return Hose J189 (Part No.36287)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Cardone – Remanufactured Power Steering Pump (Part No.20-607)

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Carquest Premium – 11/32" ID Return Hose (J189) (sold by each) (Part No.34996)

Cardone – Power Steering Filter (Part No.20-P038F)

Dorman – Power Steering Reservoir (Part No.603-902)

National – Bearing Race (Part No.M86610)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)

Driveworks – Tie Rod End (Part No.DW-ES3474)

Driveworks – Steering Tie Rod End (Part No.DW-ES3472)

Driveworks – Tie Rod End (Part No.DW-ES3473)

Driveworks – Adjusting Sleeve (Part No.DW-DS1452S)

MOOG – Steering Tie Rod End (Part No.ES3472)

MOOG – Steering Tie Rod End (Part No.ES3473)

MOOG – Steering Tie Rod End (Part No.ES3474)

Driveworks – Steering Tie Rod End (Part No.DW-ES3475)

MOOG – Lower Steering Tie Rod End Adjusting Sleeve (Part No.DS1452S)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52088463K)

Crown Auto Jeep Replacmnt – Non-Greaseable, OE Replacement, Steel (Part No.52088512)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52088870K)

Rare Parts – Tie Rod End (Part No.RP28205)

Rare Parts – Tie Rod End (Part No.RP28204)

Rare Parts – Tie Rod Sleeve (Part No.RP28196)

Cardone – Remanufactured Steering Gear (Part No.27-8414)

Powercraft – Steering Gear Major Seal Kit (Part No.8774)

Omix – Steering Damper (Part No.18040.04)

MOOG – Suspension Ball Joint (Part No.K3134T)

MOOG – Suspension Ball Joint (Part No.K3185)

Driveworks – Ball Joint (Part No.DW-K3185)

Driveworks – Ball Joint (Part No.DW-K3134T)

MOOG – Suspension Ball Joint (Part No.K7450)

RT Offroad – Suspension Ball Joint Kit: Hd Ball Joint Set, Left Or Right, Upper & Lower, Heavy Duty Zero Lash (Part No.RT21002)

MOOG – Ball Joint (Part No.K100198)

MOOG – Suspension Ball Joint (Part No.K100056)

MOOG – Suspension Ball Joint (Part No.K100312)