2000 Infiniti I30 Steering and Chassis Parts

Essential Steering and Chassis Parts for 2000 Infiniti I30s

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620353)

Control Arm and Ball Joint Assembly

from

$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1031)

Power Steering Pressure Switch

from

$127.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Sankei 555 – Ball Joint (Part No.L2020176966SNK)

Ball Joint

from

$60.65
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3017)

Remanufactured Rack and Pinion Assembly

from

$486.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Dorman – Power Steering Return Hose (Part No.979-1278)

Power Steering Return Hose

from

$109.99
This power steering return hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this power steering return hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

Cardone – Remanufactured Power Steering Pump (Part No.21-5933)

Remanufactured Power Steering Pump

from

$211.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

Driveworks – Tie Rod End (Part No.DW-ES3438)

Tie Rod End

from

$23.29
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

First Equipment Quality – FEQ Tie Rod (Part No.M3001152083FEQ)

FEQ Tie Rod

from

$7.89
FEQ tie rods meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. FEQ tie rods are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
See More

Dorman – Power Steering Pump Pulley (Part No.300-552)

Power Steering Pump Pulley

from

$76.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Powercraft – Rack Pinion Seal Kit (Part No.8976)

Rack Pinion Seal Kit

from

$105.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8831)

Pump Seal Kit

from

$32.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Beck/Arnley – Stabilizer Bushing Set (Part No.101-5588)

Stabilizer Bushing Set

from

$8.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Bushings are resistant to heat, wear, salt, road grime, and oils
  • Made from a high grade rubber compound
  • Quality construction for durability
  • Application specific for this vehicle
See More

Dorman – RACK BELLOW (Part No.541-520)

RACK BELLOW

from

$24.99
RACK BELLOW

Dorman – Power Steering Reservoir (Part No.603-825)

Power Steering Reservoir

from

$219.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
  • Complete assembly – includes reservoir and reservoir cap.
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

Cardone – Power Steering Reservoir – New (Part No.M2030257698CAR)

Power Steering Reservoir - New

from

$252.33
Import Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE new reservoirs offer installers a stand-alone replacement solution or complement a power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • New reservoir cap is included.
  • O.E. design is strictly followed to ensure proper fit and function.
See More

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-627)

Suspension Stabilizer Bar Bushing Kit

from

$20.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Sway Bar Bushing (Part No.RP19319)

Sway Bar Bushing

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

MOOG – Stabilizer Bar Link (Part No.K9824)

Stabilizer Bar Link

from

$25.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

TRW – Stabilizer Link (Part No.L1030454848TRW)

Stabilizer Link

from

$52.05
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Carquest Premium – Power Steering Pressure Hose, 14mm Female Inv. Flare x 16mm Banjo – with Switch Port (12mmX1.25) (Part No.36582)

Power Steering Pressure Hose, 14mm Female Inv. Flare x 16mm Banjo - with Switch Port (12mmX1.25)

from

$101.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Banjo (Part No.36306)

Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Banjo

from

$92.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

MOOG – Camber Adjusting Kit (Part No.K90474)

Camber Adjusting Kit

from

$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Camber Adjusting Kit (Part No.K5330)

Camber Adjusting Kit

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Upgrade your 2000 Infiniti I30 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Infiniti I30, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Infiniti or enhancing its overall performance, Steering and Chassis Parts are key to keeping your I30 functioning at its best. At Advance Auto Parts, we offer a wide selection of 81 Steering and Chassis Parts for the 2000 Infiniti I30, designed to meet your needs without breaking the bank. From Ball Joint replacements to Alignment Hardware upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2000 Infiniti I30 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $6.99 to $576.98, with an average price of $98.30. Our 81 Steering and Chassis Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 2000 Infiniti I30 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Infiniti I30, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone, Driveworks, Moog, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. Driveworks and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $20.29, and at an average 4 stars rating. With 176 customer reviews and counting, our 2000 Infiniti I30 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Infiniti I30 is always ready to roll. We’re committed to providing you with everything you need to keep your I30 in top shape, all in one place. Start shopping confidently below for your 2000 Infiniti I30!

Best-Selling Ball Joints for 2000 Infiniti I30s

Enhance the driving experience in your Infiniti with 9 quality Ball Joint components, starting at $60.65.

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620354)

Control Arm and Ball Joint Assembly

from

$151.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620355)

Control Arm and Ball Joint Assembly

from

$152.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Ball Joint (Part No.K90459)

Ball Joint

from

$61.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Control Arm Front Lower Right (Part No.520-518)

Control Arm Front Lower Right

from

$121.99
Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.

Product Features:
  • Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

Driveworks – CONTROL ARM WITH BALL JOINT (Part No.520-517)

CONTROL ARM WITH BALL JOINT

from

$124.99
Driveworks Brand Control Arm is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling

Product Features:
  • Bushings included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP11657)

Control Arm with Ball Joint

from

$172.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP11656)

Control Arm with Ball Joint

from

$171.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Dorman – Suspension Control Arm (Part No.520-517)

Suspension Control Arm

from

$130.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Sankei 555 – Ball Joint (Part No.L2020176966SNK)

Ball Joint

from

$60.65
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Most Popular 2000 Infiniti I30 Alignment Hardwares

Customize your Infiniti with 1 Alignment Hardware products like Alignment Camber Bolt Assortments, all priced under $434.99.

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Top Picks for 2000 Infiniti I30 Power Steering Parts

Upgrade Infiniti I30s with top-quality Power Steering Parts parts, including 40 OEM and aftermarket selections for your 2000 model.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Carquest Premium – Power Steering Pressure Hose, 14mm Female Inv. Flare x 16mm Banjo – with Switch Port (12mmX1.25) (Part No.36582)

Power Steering Pressure Hose, 14mm Female Inv. Flare x 16mm Banjo - with Switch Port (12mmX1.25)

from

$101.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5933)

Remanufactured Power Steering Pump

from

$211.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Carquest Premium – Power Steering End Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.34819)

Power Steering End Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube

from

$9.79
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Cardone New – New Power Steering Reservoir (Part No.3R-001)

New Power Steering Reservoir

from

$132.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • Designed to match O.E. fit, function and performance.
  • Manufactured from O.E. grade material for strength and durability.
  • Resistant to cracking caused by the high temperatures in the engine compartment.
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Rein – P/S HIGH PRESSURE FEED ASSY (Part No.PSH0414)

P/S HIGH PRESSURE FEED ASSY

from

$159.99
Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose and line assembly
  • SAE J188 compliant high pressure rubber compound hose with internal noise absorber
  • SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
  • Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
  • Pre attached protective jacket(s) and heat sleeve(s), where required
See More

Dorman – Power Steering Pump Pulley (Part No.300-552)

Power Steering Pump Pulley

from

$76.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Power Steering Return Hose Assembly, 10mm I.D. Molded Return Hose (Part No.39977)

Power Steering Return Hose Assembly, 10mm I.D. Molded Return Hose

from

$24.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3017)

Remanufactured Rack and Pinion Assembly

from

$486.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Lares – Remanufactured Power Steering Pump (Part No.3070)

Remanufactured Power Steering Pump

from

$83.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Carquest Premium – Power Steering Pressure Tube, 14mm Male Inv. Flare x 14mm Male "O" Ring – with Switch Port (Part No.37647)

Power Steering Pressure Tube, 14mm Male Inv. Flare x 14mm Male "O" Ring - with Switch Port

from

$79.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
See More

Cardone – P/S Pump Pulley (Part No.M20601322186CAR)

P/S Pump Pulley

from

$91.77
P/S Pump Pulley

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3016)

Remanufactured Rack and Pinion Assembly

from

$386.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000236546MAV)

Complete Steering Rack, Remanufactured

from

$576.98
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3754N)

NEW RACK & PINION

from

$529.99
NEW RACK & PINION

Cardone – Steering Rack (Part No.M1000899829CAR)

Steering Rack

from

$385.30
Steering Rack

Cardone – Power Steering Reservoir – New (Part No.M2030257698CAR)

Power Steering Reservoir - New

from

$252.33
Import Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE new reservoirs offer installers a stand-alone replacement solution or complement a power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • New reservoir cap is included.
  • O.E. design is strictly followed to ensure proper fit and function.
See More

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5233N)

NEW P/S PUMP

from

$232.99
NEW P/S PUMP

Rein – Automotive Power Steering Pressure Line Hose Assembly (Part No.M2015284549RIN)

Automotive Power Steering Pressure Line Hose Assembly

from

$229.76
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

Dorman – Power Steering Reservoir (Part No.603-825)

Power Steering Reservoir

from

$219.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
  • Complete assembly – includes reservoir and reservoir cap.
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

Cardone – P/S Pump (Part No.M2010901431CAR)

P/S Pump

from

$202.57
P/S Pump

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1031)

Power Steering Pressure Switch

from

$127.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.37668)

Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose

from

$109.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
  • Heat/abrasion tubing protects vital areas
See More

Dorman – Power Steering Return Hose (Part No.979-1278)

Power Steering Return Hose

from

$109.99
This power steering return hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this power steering return hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Powercraft – Rack Pinion Seal Kit (Part No.8976)

Rack Pinion Seal Kit

from

$105.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8831)

Pump Seal Kit

from

$32.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Gates – P/S Return Hose (Part No.M20161154746GAT)

P/S Return Hose

from

$30.71
P/S Return Hose

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Dorman – RACK BELLOW (Part No.541-499)

RACK BELLOW

from

$24.99
RACK BELLOW

EMPI – re Steering Rack Boot (Part No.M1010568882EMP)

re Steering Rack Boot

from

$22.03
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Dorman – RACK BELLOW (Part No.541-522)

RACK BELLOW

from

$21.99
RACK BELLOW

EMPI – re Steering Rack Boot (Part No.M1010568879EMP)

re Steering Rack Boot

from

$17.04
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Omega – P/S Hose Fitting (Part No.M20231467173OME)

P/S Hose Fitting

from

$9.53
P/S Hose Fitting

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

In-Demand Tie Rods for 2000 Infiniti I30s

Select from 9 premium Tie Rods parts for your 2000 Infiniti I30, with prices ranging from $7.89 to $98.43.

MOOG – Tie Rod End (Part No.ES3438)

Tie Rod End

from

$47.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.EV458)

Tie Rod End

from

$59.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Assembled in the USA
  • TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
See More

Driveworks – Tie Rod End (Part No.DW-ES3407)

Tie Rod End

from

$32.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Driveworks – Tie Rod End (Part No.DW-ES3438)

Tie Rod End

from

$23.29
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

TRW – TRW Tie Rod (Part No.M3001152083TRW)

TRW Tie Rod

from

$98.43
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
See More

Beck/Arnley – Inner Tie Rod End (Part No.101-5164)

Inner Tie Rod End

from

$55.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M301059463SNK)

Sankei 555 Tie Rod End

from

$46.36
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

CTR – Tie Rod (Part No.M3001152083CTR)

Tie Rod

from

$40.60
CTR tie rods meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. CTR tie rods are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
See More

First Equipment Quality – FEQ Tie Rod (Part No.M3001152083FEQ)

FEQ Tie Rod

from

$7.89
FEQ tie rods meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. FEQ tie rods are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
See More

Most Sold 2000 Infiniti I30 Sway Bars

Explore our best-selling Infiniti parts for the 2000 I30 among 18 OEM and aftermarket options starting from $8.49.

MOOG – Stabilizer Bar Link (Part No.K90431)

Stabilizer Bar Link

from

$29.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Link (Part No.K90432)

Stabilizer Bar Link

from

$29.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

TRW – Stabilizer Link (Part No.L1030151994TRW)

Stabilizer Link

from

$40.39
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Driveworks – Sway Bar Link Kits (Part No.DW-K90432)

Sway Bar Link Kits

from

$24.29
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot with grease relief valve keeps contaminants out
  • Performance tested to ensure durability
See More

TRW – Stabilizer Link (Part No.L1030151993TRW)

Stabilizer Link

from

$40.39
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Rare Parts – Sway Bar Bushing (Part No.RP19319)

Sway Bar Bushing

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Beck/Arnley – Stabilizer End Link (Part No.101-4896)

Stabilizer End Link

from

$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Beck/Arnley – Stabilizer End Link (Part No.101-4895)

Stabilizer End Link

from

$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

QSTEN – Sway Bar Link (Part No.L1030151994RHY)

Sway Bar Link

from

$27.54
The QSTEN Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

QSTEN – Sway Bar Link (Part No.L1030151993RHY)

Sway Bar Link

from

$26.57
The QSTEN Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

International Suspension Group – Sway Bar Link (Part No.L1030151993ISG)

Sway Bar Link

from

$24.75
Sway Bar Link

International Suspension Group – Sway Bar Link (Part No.L1030151994ISG)

Sway Bar Link

from

$24.69
Sway Bar Link

TRW – Sway Bar Bushing Kit (Part No.L1049463685TRW)

Sway Bar Bushing Kit

from

$23.35
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Sankei 555 – Sway Bar Link (Part No.L1030151994SNK)

Sway Bar Link

from

$21.45
Sway Bar Link

Sankei 555 – Sway Bar Link (Part No.L1030151993SNK)

Sway Bar Link

from

$19.71
Sway Bar Link

First Equipment Quality – Sway Bar Link (Part No.L1030151993FEQ)

Sway Bar Link

from

$9.17
The FEQ Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

First Equipment Quality – Sway Bar Link (Part No.L1030151994FEQ)

Sway Bar Link

from

$9.17
The FEQ Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Beck/Arnley – Stabilizer Bushing Set (Part No.101-5588)

Stabilizer Bushing Set

from

$8.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Bushings are resistant to heat, wear, salt, road grime, and oils
  • Made from a high grade rubber compound
  • Quality construction for durability
  • Application specific for this vehicle
See More

Top-Rated Steering and Chassis Parts Brands For Your 2000 Infiniti I30

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2000 Infiniti I30s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone, Driveworks, and Moog, and more. Steering and Chassis Parts from these brands that fit a 2000 I30 start at just $20.29 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2000 Infiniti I30 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Infiniti I30, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2000 Infiniti I30. With over 12 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $192.53. Plus, with over 67 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Remanufactured Rack and Pinion Assembly
from
$486.99
This product is not rated

Remanufactured Rack and Pinion Assembly

“”

New Power Steering Reservoir
from
$132.99
This product is not rated

New Power Steering Reservoir

“”

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

Popular Driveworks 2000 Infiniti I30 Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2000 Infiniti I30 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2000 I30, Advance Auto Parts carries a full inventory of 7 Driveworks Steering and Chassis Parts. Plus you will be keeping your Infiniti in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $20.29 to $124.99, plus, with more than 42 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Tie Rod End
from
$23.29

(2)

Tie Rod End

“Easy on , sound equipment with grease fitting”

CONTROL ARM WITH BALL JOINT
from
$124.99
This product is not rated

CONTROL ARM WITH BALL JOINT

“”

Tie Rod End
from
$32.99

(27)

Tie Rod End

“Fits 2000 Maxima!”

FAQs for 2000 Infiniti I30 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2000 Infiniti I30s?

Out of 81 Steering and Chassis Parts that fit 2000 Infiniti I30s, the following parts are the top sellers:

What’s the price range for 2000 Infiniti I30 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2000 Infiniti I30 start at $6.99 and go up to $576.98 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2000 Infiniti I30?

The average price for Steering and Chassis Parts for the 2000 Infiniti I30 is $98.30. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Infiniti I30 model years?

Yes, we currently carry Steering and Chassis Parts for 5 model years of Infiniti I30s between 1996 and 2001. Steering and Chassis Parts are bought most frequently for the following model years: 2001, 1999, 1998, 1997, and 1996.

What are the cheapest Steering and Chassis Parts for my 2000 Infiniti I30?

The cheapest 2000 Infiniti I30 Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2000 Infiniti I30?

Out of 176 reviews by customers, our 2000 Infiniti I30 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2000 Infiniti I30 and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2000 Infiniti I30?

Can I get help with 2000 Infiniti I30 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Infiniti Steering and Chassis Parts and more.

What is your return policy for Infiniti I30 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Infiniti I30 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.