Name: Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 4
Brand: WeatherTech
SKU: 82184
Price: 135.99 USD
Rating: 4.0 (1 reviews)

from

$135.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision machined to perfectly fit your vehicle s window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked: Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$204.99

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

Floorless design allows for set up without removing gear from the bed
Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
Color coded poles and pole pockets for quick and easy set up
Water resistant fabric with tape sealed seams (PU 2000mm)
Sky view vent for more light, ventilation, and sleeping under the stars
All truck tents sleep (2) adults
Includes: tent, rainfly, stuff sack, and sewn-in set up guide

from

$40.99

Block heaters help to increase oil viscosity in cold weather in 2 to 5 hours. They also improve lubrication of engine parts and protect the engine from cold weather starts. The heaters decrease the amount of hydrocarbons put into the atmosphere when a vehicle is started in cold weather.

from

$167.99

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

Maximum protection to your hood to complement the look of your vehicle
Precision engineered for a perfect fit to your vehicle
Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
Available in smoke, chrome, American flag and camo finishes
UV and scratch-resistant while being car-wash safe

from

$23.49

This direct replacement cigarette light is designed to match the fit and function of the original lighter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this direct replacement cigarette lighter is designed to match the fit and function of the original lighter on specified vehicles
Ideal solution – this cigarette lighter is a reliable replacement for an original lighter that is missing or burned out
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

This door interior reflector is designed to match the fit and appearance of the original reflector on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door interior reflector is designed to match the fit and appearance of the original reflector on specified vehicles
Restores functionality – this reflector is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$89.99

This door armrest is designed to match the fit and appearance of the original armrest on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door armrest is designed to match the fit and appearance of the original armrest on specified vehicles
Restores functionality – this armrest is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$378.99

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

Good basic indoor protection
Drill weave Polycotton blend
Resists tears and punctures
Treated to resist rot and mildew

from

$25.99

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

from

$19.99

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

from

$206.99

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone’s needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

Designed To Be Installed On All Truck Beds
Quickly Removed For A Clean Look When Not In Use
Adjustable Width And Height For Customized Installation
High Quality And Durable Powder Coated Finish
250 Pounds Capacity
Easy Install And Can Be Mounted On Driver Or Passenger Side
Drilling Is Required

from

$812.99

TrailFX(R) Contractor Racks are designed and manufactured with both functionality and durability as a top priority. These racks are fully adjustable and will fit full-size pickup trucks with either short or long beds.

Product Features:

Adds Convenience For Hauling Cumbersome Equipment Or Materials
Durable Steel Cleats Are Welded To Each Upright
Rear Cross Member Can Be Easily Removed To Accommodate Taller Items
Black Powder Coated Finish
No Drilling Required When Installed With Supplied J-Hooks
Adjustable To Fit Both Long And Shortbed Models

from

$79.99

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor
Manufactured In America To ISO 9001 Standards, And Also Meet FMVSS302 Standards-Your Assurance Of Quality

from

$79.99

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

from

$50.99

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

Securely mounts above the window on the door
Precision engineered for a perfect fit to your vehicle
Available in impact-resistant acrylic with a smoke finish
Made in USA
Car-wash safe

from

$135.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision-machined to perfectly fit your vehicle window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. (U.S. Department of Transportation) approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent: OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$793.99

The TrailFX (R) Steel liquid transfer tank is designed to be used with full size trucks. This sturdy one piece design allows you to get the greatest storage capacity. Lockable vent caps help to eliminate tampering, and heavy duty lifting loops make installation easy.

Product Features:

Designed To Carry Diesel Non Potable Water, Or Other Non Flammable Liquids Safely
Constructed From Heavy Duty Diamond Plate Aluminum
Includes Lockable Cap (Must Purchase Pad Lock Separately) To Secure Transported Liquids
Mounting Tabs Included When Necessary For Permanent Mounting (Hardware Not Included)
Drain Plug Included To Assist With Dispersement Of Liquids
Limited Lifetime Warranty

from

$1427.99

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

Made From Non-Rusting Brite-Tread Aluminum
Perfect For Transporting Liquids
Radius Curve Design Eliminates Key Welded Pressure Points
Many Handy Styles To Fit Most Needs

from

$15.29

Sometimes the outer case for your keyless entry remote can be damaged or cracked. Even normal wear and tear can often lead to an unpleasant cosmetic appearance. This replacement shell will have your remote looking sleek and stylish in no time.

Product Features:

Replacement Case for Select GM Remotes
Replaces OEM factory-original remote case

from

$15.29

Sometimes the outer case for your keyless entry remote can be damaged or cracked. Even normal wear and tear can often lead to an unpleasant cosmetic appearance. This replacement shell will have your remote looking sleek and stylish in no time.

Product Features:

GM Camo Themed Replacement Remote Case
Replaces OEM factory-original remote case
Camouflage theme

from

$62.99

Looking for a spare key fob? We’ve got you covered! This transmitter device operates your vehicle’s keyless entry system with four button functions: LOCK, UNLOCK, TRUNK, and PANIC. The clicker’s durable case is meant to withstand everyday use while keeping internal electronics protected. This remote enhances both vehicle security and entry with a small click of a button. Easy! It has a freshly installed battery and is able to emit signals from a range of distances. This fob makes a great gift for both new and experienced drivers.

Product Features:

Replacement Remote with FCC ID: KOBUT1BT
4 button functions: LOCK, UNLOCK, TRUNK, and PANIC
Freshly installed battery included

from

$151.99

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

Classic Raised Brite Tread Pattern
Rigid Frame Resists Warping
Molded Locking Tabs
Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
Made In USA

from

$251.99

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

Classic Raised Brite Tread Pattern
Convenient Molded Cup Holders
Molded Locking Tabs
Double Walled Lid
Double Wall Lid For Extra Support Classic Brite-Tread Pattern
Classic Brite-Tread Pattern
Made In USA

from

$20.49

Keys come in many shapes and sizes. Non-transponder keys, such as these, require no special programming. They will need to be cut by a locksmith or automotive professional.

Product Features:

Replacement Non-Transponder Key for Buick/Cadillac/Chevrolet/GMC Vehicles
Requires no special programming
Comes with uncut key blade

from

$10.99

New Standard Replacement License Plate Bracket, Front [Use With Bumpers That Do Not Have An Impact Strip]

Product Features:

Front [Use With Bumpers That Do Not Have An Impact Strip], Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

New Standard Replacement License Plate Bracket, Front [Use With Bumpers That Have Impact Strip]

Product Features:

Front [Use With Bumpers That Have Impact Strip], Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.49

Dee Zee Bull Bar Guard License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.

Product Features:

License Plate Frame Mount
Made From 2.5 Millimeter Hot Rolled Steel
Protective Gloss Black Powder Coat Finish
Attach A License Plate To Your Dee Zee Bull Bar
Mounts To Underside Of The Center Tube
Uses 6 Millimeter Threaded Inserts

from

$23.99

This license plate bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this license plate bracket matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

2000 GMC C2500 Automotive Accessories

More 2000 GMC C2500 Automotive Accessories Categories

Essential 2000 GMC C2500 Automotive Accessories

WeatherTech – Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 4 (Part No.82184)

Rightline Gear – Full Size Standard Bed Truck Tent (6.5′) (Part No.110730)

Zerostart – Engine Heater, 600W 120V, 1 5/8 Inch Plug, GM , Ford, Jeep, Continental (Part No.3100057)

Stampede – Vigilante Premium, Hood Shields, Flag No Eagle, High Profile, 1 Pc (Part No.301-41)

Dorman – Help – Lighter Socket And Removal Tool (Part No.56457)

Dorman – Help – Door Reflector Front (Part No.74327)

Dorman – Help – Front Left Side Armrest (Part No.80979)

Covercraft – Custom Fit Car Covers Polycotton Gray (Part No.C13421PD)

Fiamm – Freeway Blaster High Note Horn (Part No.7210223)

Fiamm – Freeway Blaster Low Note Horn (Part No.7211223)

TrailFX – 250 Pound Capacity, Multi-Fit, Adjustable W From 24"Es To 35"Es, Powder Coated (Part No.2599123103)

TrailFX – Heavy-Duty Adjustable Ladder Rack for Full-Size Trucks (Part No.FCLR002B)

WeatherTech – Direct-Fit, Deeply Sculpted Channels, Black, Rubber, 2 Piece (Part No.W26)

WeatherTech – Direct-Fit, Deeply Sculpted Channels, Gray, Tpe, 2 Piece (Part No.W14GR)

Stampede – Tape-Onz Window Visors: Outside Mount, Smoke, Front, 2 Pc (Part No.6005-2)

WeatherTech – Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 4 (Part No.88184)

TrailFX – Liquid Transfer Tank, Non-Flammable Liquids And Diesel Fuel Tank, 35 Gallon Capacity, Vertical (Part No.210501)

Dee Zee – Diesel,108 Gallon Capacity, Rectangle Shape, 24" L X 48" W X 24"H, Diamond Tread (Part No.DZ91753)

iKeyless – GM – 3 Button Black Remote Replacement Shell (Part No.GMMT300)

iKeyless – GM – 4 Button Camo Themed Remote Replacement Shell (Part No.GMMT400CA)

iKeyless – GM Keyless Entry Remote – 4 Button with Trunk (Part No.GM660)

Dee Zee – Chest, Single Lid, Black, Plastic, 35" L X 14" W X 13" H, 3.6 Cubic Ft Capacity (Part No.DZ6535P)

Dee Zee – Chest, Single Lid, Black, Plastic, 39" L X 27" W X 17" H, 10.35 Cubic Ft Capacity (Part No.DZ6537P)

iKeyless – Buick/Cadillac/Chevrolet/GMC Non-Transponder Key (Part No.GMKEY202)

KAI – License Plate Bracket, Front, Use With Bumpers That Do Not Have An Impact Strip (Part No.GM1068102)

KAI – License Plate Bracket (Part No.GM1068101)

Dee Zee – For Use With Dee Zee Bull Bars, Black, Steel (Part No.DZLPMOUNT)

Dorman – Help – Front License Plate Mounting Bracket (Part No.68184)

Popular 2000 GMC C2500 Automotive Accessories Categories

2000 GMC C2500 Automotive Accessories

Top-Rated Automotive Accessories Brands For Your 2000 GMC C2500

Popular Auto Ventshade (AVS) Automotive Accessories

Top-Rated Automotive Accessories

FAQs for 2000 GMC C2500 Automotive Accessories

What are the most purchased Automotive Accessories for the 2000 GMC C2500?

What are the top-rated 2000 GMC C2500 Automotive Accessories?