Name: Keyed Alike Locking Fuel Cap
Brand: Carquest Premium
SKU: 17591D
Price: 16.79 USD
Rating: 5.0 (1 reviews)

from

$16.79

None

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$8.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$152.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

from

$103.99

This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$111.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Designed with OE electrical connectors ensuring proper fits.
Application-specific, one-size-fits-all design.

from

$29.99

This fuel injection fuel feed and return pipe seal kit is designed to match the original hardware required to reseal and repair fuel lines on specified vehicles. It’s made of quality components for reliable performance.

Product Features:

Direct replacement – this fuel injection fuel feed and return pipe seal kit is designed to match the original hardware required to reseal and repair fuel lines on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are leaking or damaged
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$436.99

CARDONE Remanufactured Injector Driver Modules are engineered for quick installation and no comebacks. Each unit is engineered to meet or exceed OEM performance. All modules are 100% computerized tested and resolder of critical components, as well as 100% replacement of common ware components, ensuring superior electrical connections.

Product Features:

100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life
All modules are 100% tested with automated computerized test equipment to ensure functionality and reliability
Common wear components are identified and replaced 100% to ensure reliable performance
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$234.99

Fuel Injection Pressure Regulator

from

$15.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$23.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$118.99

Water in fuel is like a contaminant. It can erode the surfaces of orifices in precision injectors and cause corrosion in fuel systems. Fram Fuel Filter / Water Separators are specially designed to strip droplets of emulsified water from fuel and contain it in a reservoir at the bottom of the filter.

Product Features:

High durability and reliable performance
Excellent dirt-holding capacity
Low flow restriction

from

$372.99

This complete repair solution allows replacement of the fuel injector harness on the Ford 6.0L Power Stroke engine. The harness connects between the Fuel Injection Control Module (FICM) and fuel injectors. Chafing and damage to the OE harness is common due to improper OE routing and contact with sharp engine components. This can result in an engine misfire or no-start condition or damage to other components in the system. This new harness allows proper routing to eliminate this condition.

Product Features:

Includes all new wiring and connectors
Upgraded harness wrap reduces potential for chafing
Includes technical bulletin and installation tips

from

$1347.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Exact fit original equipment replacements means easy installation
Delphi injection pumps are produced in a Delphi ISO 9001:2008 certified facility
All parts used in the rebuild process are Delphi validated
All Delphi injection pumps are tested utilizing OE methodologies
All pumps are functionally tested for correct operation which improves pump reliability

from

$31.99

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

Valve cover gasket connector pigtail connects between engine harness and valve cover gasket
One required per side

from

$131.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$33.49

This fuel injection harness connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel injection harness connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$322.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$687.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications.
Includes all new premium quality o-rings and seals.
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

from

$68.99

This replacement diesel fuel heating element matches the function and performance of the original equipment part. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:

Upgraded replacement – this diesel fuel bowl heating elements features more reliable technology
Ensures performance – updated ceramic design maintains a lasting electric connection
Direct fit – reverse engineered from original equipment for seamless installation
Quality engineering – designed and tested in the United States

from

$30.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$166.99

A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.

Product Features:

Original equipment fit, form and function
Meets or exceeds OE performance specifications
Premium materials ensure trouble-free operation

from

$124.99

A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.

Product Features: