2000 Ford E-150 Econoline Club Wagon Intake Manifold Parts

Essential 2000 Ford E-150 Econoline Club Wagon Intake Manifold Parts

Carquest – Air Charge Temperature Sensor (Part No.31A1019)

Air Charge Temperature Sensor

from

$22.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Dorman – Intake Manifold Bolt (Part No.B1217751293DOR)

Intake Manifold Bolt

from

$41.08
Intake Manifold Bolt

Dorman – Upper Plastic Intake Manifold – Includes Gaskets (Part No.615-278)

Upper Plastic Intake Manifold - Includes Gaskets

from

$393.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Upper Plastic Intake Manifold – Includes Gaskets
  • Upper Plastic Intake Manifold – Includes Gaskets
  • This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – tested to ensure top-quality OEM performance and durability
See More

Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-188)

Plastic Intake Manifold - Includes Gaskets

from

$231.99
If you need to swap out the intake manifold on select Ford trucks, SUVs or vans, this proven replacement is the best solution. It’s made in the USA to deliver reliable quality that matches the fit, function and performance of the original. It has several smart features, such as integrated gaskets that sit in the manifold, rather than the carrier gasket design of the factory unit, reducing contact points with the head to help prevent potential air leaks. The complete kit includes the tough polymer manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws. It also has an integrated PCV nipple to ensure proper vacuum, an updated thermostat design to prevent coolant leaks, and a clamp to keep the coolant block off cap in place. Don’t waste money going back to the dealership, and don’t waste time with an aftermarket imitator that isn’t up to the job. Fix your manifold issues with this reliable replacement.

Product Features:
  • Ideal replacement – this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines
  • Made in USA – designed, engineered and manufactured in the United States to deliver consistent quality and precise construction
  • Proven design – features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance
  • Complete kit – includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws
See More

Dorman – Upper Plastic Intake Manifold (Part No.615-463)

Upper Plastic Intake Manifold

from

$125.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – tested to ensure top-quality OEM performance and durability
  • Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
  • Trustworthy design – built by the industry leader in aftermarket manifolds
See More

Dorman – Lower Aluminum Intake Manifold – Includes Gaskets (Part No.615-285)

Lower Aluminum Intake Manifold - Includes Gaskets

from

$273.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – tested to ensure top-quality OEM performance and durability
  • Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
  • Trustworthy design – built by the industry leader in aftermarket manifolds
See More

Dorman – Intake Manifold Runner Control Valve (Part No.B1220422580DOR)

Intake Manifold Runner Control Valve

from

$255.83
Save time, money and labor with Dorman’s Intake Manifold Runner Control Valve. Now you can replace only the part, instead of the entire Intake Manifold. Replacement restores fuel efficiency, eliminates stuttering, and enables your vehicle to start and run reliably again.

Product Features:
  • Replacement returns vehicle to proper operation
  • Direct replacement for a proper fit every time
  • Durable construction for a long service life
  • Easy to install
See More

Dorman – Intake Manifold Runner Control Valve (Part No.B1220422581DOR)

Intake Manifold Runner Control Valve

from

$188.49
Save time, money and labor with Dorman’s Intake Manifold Runner Control Valve. Now you can replace only the part, instead of the entire Intake Manifold. Replacement restores fuel efficiency, eliminates stuttering, and enables your vehicle to start and run reliably again.

Product Features:
  • Replacement returns vehicle to proper operation
  • Direct replacement for a proper fit every time
  • Durable construction for a long service life
  • Easy to install
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.362660.1)

Steel Cup Expansion Plug 1-41/64 In., Height 0.360

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Intake Manifold Runner Control (Part No.911-917)

Intake Manifold Runner Control

from

$279.99
This replacement intake manifold runner control motor matches the fit and function of the original equipment motor on specified vehicles. It’s designed with factory-style electrical connectors for a direct installation.

Product Features:
  • Ideal replacement – this intake manifold runner motor directly replaces the original motor on specified vehicle years, makes and models
  • Durable construction – this part is made of quality materials and components for long-lasting, reliable service
  • Cost-effective solution – offers original equipment quality at competitive price
  • Trustworthy quality – backed by team of engineers in the United States
See More

Dorman – Upper Intake Manifold Gasket Set: 14 Piece Set (Part No.615-278G)

Upper Intake Manifold Gasket Set: 14 Piece Set

from

$50.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:
  • Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
  • Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Intake replacement base and upper plenum gasket for #2945 & #3887 (Part No.7232)

Intake replacement base and upper plenum gasket for #2945 & #3887

from

$20.99


Product Features:
  • Includes Base-to-Upper and Plenum Cover Gaskets
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98008 T-3)

Engine Intake Manifold Gasket Set

from

$102.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98008 T-2)

Engine Intake Manifold Gasket Set

from

$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 92121-2)

INTAKE MANIFOLD GASKET SET

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98008 T)

Engine Intake Manifold Gasket Set

from

$111.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Intake Gasket (Part No.223)

Intake Gasket

from

$35.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits 1977-1997 Ford Small Block 351 Windsor 2 or 4-barrel.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
See More

Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)

SysteMAX; Intake Manifold Gasket

from

$48.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.

Product Features:
  • SysteMAX II Upper/Lower Manifold
See More

Dorman – Upper Intake Manifold Gasket Set: 15 Piece Set (Part No.615-188G)

Upper Intake Manifold Gasket Set: 15 Piece Set

from

$65.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:
  • Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
  • Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Vacuum Retainer Bushings (Part No.47099)

Vacuum Retainer Bushings

from

$9.99
This engine intake manifold vacuum retainer bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine intake manifold vacuum retainer bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

2000 Ford E-150 Econoline Club Wagon Intake Manifold Parts

Maybe you’re in the middle of a full rebuild of that 2000 Ford E-150 Econoline Club Wagon. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 22 different Intake Manifold Parts in our inventory ranging from $2.29 to $965.06. That means you can find the exact parts or products you need to keep that 2000 Ford E-150 Econoline Club Wagon running smoothly.

Intake Manifold Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2000 Ford E-150 Econoline Club Wagon. Dorman, Felpro, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Intake Manifold Parts for your 2000 Ford E-150 Econoline Club Wagon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Intake Manifold Parts to keep your 2000 Ford E-150 Econoline Club Wagon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Intake Manifold Parts Brands To Make Your 2000 Ford E-150 Econoline Club Wagon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2000 Ford E-150 Econoline Club Wagon demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your E-150 Econoline Club Wagon the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.

Popular Felpro Intake Manifold Parts

We carry Felpro parts in our stock across Intake Manifold Gasket Sets categories, plus more. For a 2000 Ford E-150 Econoline Club Wagon, our most popular Felpro Intake Manifold Parts include:
Engine Intake Manifold Gasket Set
from $121.99
(1)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
Engine Intake Manifold Gasket Set
from $102.99
(6)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
INTAKE MANIFOLD GASKET SET
from $56.99
(11)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets

FAQs for 2000 Ford E-150 Econoline Club Wagon Intake Manifold Parts

What are the most purchased Intake Manifold Parts for the 2000 Ford E-150 Econoline Club Wagon?

Out of 22 Intake Manifold Parts for the 2000 Ford E-150 Econoline Club Wagon, the most popular in our inventory are:
INTAKE MANIFOLD GASKET SET
from $62.99
(5)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets
Lower & Upper Intake Manifold Gasket Set: 14 Piece Set
from $60.99
(1)
Lower & Upper Intake Manifold Gasket Set: 14 Piece Set
Intake Manifold Gasket Sets
Steel Cup Expansion Plug 1-41/64 In., Height 0.360
from $2.29
This product is not rated
Steel Cup Expansion Plug 1-41/64 In., Height 0.360
Intake Manifold Expansion Plugs