2000 Dodge Ram 3500 Exhaust Parts
Find Your Specific 2000 Dodge Ram 3500 Exhaust Parts
Below you will find various in-demand Dodge Exhaust Parts, components and accessories for your 2000 Ram 3500. Advance Auto Parts has popular Ram 3500 parts like Exhaust Hangers, Exhaust Fittings, Exhaust Manifold and Headers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Ram 3500 model years including
1998,
2003,
2004,
2005,
2006,
2007,
2008,
2009,
2010 and more. Select a category of 2000 Dodge Ram 3500 Exhaust Parts below and start saving instantly.
Popular 2000 Dodge Ram 3500 Exhaust Parts Categories
Essential Exhaust Parts for 2000 Dodge Ram 3500s
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.60110)
from
$480.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60110. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447206)
from
$390.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54637)
from
$365.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker Quiet-Flow muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – Delta 40 Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.843041)
from
$154.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dorman – Help – Exhaust Stud Kit – 3/18-16 x 2-1/2 In. (Part No.03125)
from
$15.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
aFe POWER – MACHForce-Xp Hanger (Part No.49-02001BR)
from
$88.99
The MACH Force XP tailpipe hanger kit is engineered to provide OE-style fitment and to stand up to the most extreme conditions. This bracket is recommended when installing 1994-1997 Dodge RAM 2500/3500 5.9L aFe Power Exhaust Systems. The MACH Force XP line-up is the perfect combination of fit and value.
Product Features:
See More
Product Features:
- Durable Construction/10 Gauge Mild Steel
- OE Style Bayonet Hangers Maintain A Stable Pipe Location
- Stands Up To The Most Extreme Conditions
- Rubberized Isolation Mounts
Elring – Exhaust Manifold Gas (Part No.A8111495015ELR)
from
$33.87
Exhaust Manifold Gas
Felpro – Exhaust Manifold Gasket Set (Part No.MS 92089)
from
$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Dorman – Help – Install kit for mounting exhaust manifold to engine includes 12 -10X1.50mm bolts (Part No.03417B)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Flange Hardware Kit (Part No.03442)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Pipe 4" Inlet (ID) 4" Outlet (OD) (Part No.52585)
from
$84.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Exhaust Pipe 2.375" Inlet (OD) (Part No.53796)
from
$116.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dynomax – Universal Catalytic Converter :Fabrication Needed; 2 " In, 2.5 "Ou, EPA Cpl (Part No.51067)
from
$105.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust System Hanger Insulator (Part No.35646)
from
$7.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35774)
from
$7.79
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Exhaust Down Pipe V-Band Clamp (Part No.904-253)
from
$49.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles.
- Ideal solution – engineered to help ensure secure connections between exhaust system components.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
JBA Performance – 1 5/8" Header Shorty Stainless Steel (Part No.1961S-1JS)
from
$899.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1961S-1JS 1 5/8″ Header Shorty Stainless Steel 06-08 Ram 5.7L Hemi 15/25/3500 2&4 Wheel Drive Silver Ceramic
- Mandrel bent stainless steel tube
aFe POWER – Exhaust Manifold (Part No.46-40034)
from
$745.99
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. The thick wall (0.25in. vs. 0.15in.) design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance.
Product Features:
See More
Product Features:
- Outflows The Factory Manifold By 50%
- Improved Performance And Throttle Response
- Ported Flanges Ensure Excellent Seal And Stylist Look
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
JBA Performance – 1 5/8" Header Shorty Stainless Steel (Part No.1961S-2JT)
from
$957.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1961S-1JT 1 5/8″ Header Shorty Stainless Steel 09-14 Ram 5.7L Hemi 15/25/3500 2&4 Wheel Drive Titanium Ceramic
- Mandrel bent stainless steel tube
Walker – Exhaust Pipe 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.42233)
from
$55.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.52476)
from
$49.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.54804)
from
$48.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
aFe POWER – Large Bore-HD DPF Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-42006-B)
from
$505.99
Gain 22% more exhaust flow for improved performance and sound. This DPF-back exhaust is 100% hand MIG-welded, mandrel bent, 4″ 409 stainless steel tubing for strength and durability and is finished off with a 5″ intercooled, polished exhaust tip to reduce EGT’s. This system utilizes factory mounting locations, and includes high quality hardware for a quick, hassle-free installation. Stainless Steel Construction This DPF-Back is constructed of 100% hand MIG-welded, mandrel bent, 4″ 409 stainless steel tubing for strength and durability. 5″ Diameter Exhaust Tip: Finishing off this exhaust is a 5″ diameter slash cut, stainless steel tip with intercooling vents to reduce EGT’s at the tailpipe and are badged with laser-cut aFe POWER plates riveted on. Installation is a Snap This system uses factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 degree sealing surface. Flow and Performance This exhaust system is constructed of 4″ mandrel-bent 409 stainless steel tubing for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.
Product Features:
See More
Product Features:
- 100% MIG Welded
- Quality Hardware
aFe POWER – Large Bore-HD DPF Back Exhaust System: No Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-42016)
from
$682.99
Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Product Features:
See More
Product Features:
- 5 in. 409 Stainless Steel Tubing
- Increased Flow And Performance
- High Quality Band Clamps
- Bayonet OE Style/Welded-On Hangers
MBRP Exhaust – XP Series, 4 In Turbo Back System: Polished Tip, 409 Stainless Steel, Designed for Power and Sound (Part No.S6100409)
from
$644.99
Rugged and dependable our XP Series is made of T409 stainless steel. Its designed and built to stand up to the harshest road conditions. We are so sure that our XP Series has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere, and also provided with the free exhaust tip with this XP Series.
Product Features:
See More
Product Features:
- The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
- Vehicle Maintains Optimal Operating Temperatures
- Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
- Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
- Constructed From T409 Stainless Steel
- Designed And Built To Stand Up To The Harshest Road Conditions
- Easy, Bolt On Design, Makes Easy To Install
- Limited Lifetime Warranty
aFe POWER – Large Bore-HD Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP (Part No.49-42005)
from
$838.99
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Product Features:
See More
Product Features:
- 4 in. Mandrel Bent 409 Stainless Steel Tubing
- Maximum Flow
- High Flow Muffler
- Bayonet Style Hangers For Easy Installation
Upgrade your 2000 Dodge Ram 3500 with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2000 Dodge Ram 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your Ram 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Exhaust Parts for the 2000 Dodge Ram 3500, designed to meet your needs without breaking the bank.
From
Exhaust Hanger
replacements to
Exhaust Fittings
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2000 Dodge Ram 3500 at great prices.
Our Exhaust Parts inventory for this model
ranges from just $6.79 to $745.99, with
an average price of $218.90.
Our 32 Exhaust Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2000 Dodge Ram 3500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Dodge Ram 3500, we stock popular OEM and aftermarket Exhaust Parts from top names
like Walker Dorman, and more.
Walker Exhaust Parts
start at just $6.79 and boast an impressive 4 stars average rating from customers.
With 86 customer reviews and counting, our 2000 Dodge Ram 3500 Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Dodge Ram 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Ram 3500 in top shape, all in one place.
Start shopping confidently below for your 2000 Dodge Ram 3500!
Best-Selling Exhaust Hangers for 2000 Dodge Ram 3500s
Enhance the driving experience in your Dodge with 3 quality Exhaust Hanger components, starting at $6.79.
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Exhaust Stud Kit – 3/18-16 x 2-1/2 In. (Part No.03125)
from
$15.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
AP Exhaust – Exhaust Hanger (Part No.H80502393053APE)
from
$17.84
Exhaust Hanger
Most Popular 2000 Dodge Ram 3500 Exhaust Fittings
Customize your Dodge with 2 Exhaust Fittings products
like Exhaust Clamps, all
priced under $47.99.
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.36119)
from
$47.99
Complete your exhaust repair with a Walker U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Top Picks for 2000 Dodge Ram 3500 Exhaust Manifold and Headers
Upgrade Dodge Ram 3500s with top-quality Exhaust Manifold and Headers parts, including 3 OEM and aftermarket selections for your 2000 model.
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-602)
from
$238.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
aFe POWER – Exhaust Manifold (Part No.46-40032)
from
$627.99
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. The thick wall (0.25in. vs. 0.15in.) design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance.
Product Features:
See More
Product Features:
- Outflows The Factory Manifold By 50%
- Improved Performance And Throttle Response
- Cast Ductile Iron Manifold As Excellent Stock Replacement
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
aFe POWER – Exhaust Manifold (Part No.46-40034)
from
$745.99
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. The thick wall (0.25in. vs. 0.15in.) design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance.
Product Features:
See More
Product Features:
- Outflows The Factory Manifold By 50%
- Improved Performance And Throttle Response
- Ported Flanges Ensure Excellent Seal And Stylist Look
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
In-Demand Exhaust Mufflers for 2000 Dodge Ram 3500s
Select from 2 premium Exhaust Mufflers parts for your 2000 Dodge Ram 3500, with prices ranging from $229.99 to $249.99.
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21443)
from
$249.99
Designed to deliver superior flow and OE-style sound, Walker Quiet-Flow mufflers are available for top-selling domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18853)
from
$229.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Most Sold 2000 Dodge Ram 3500 Exhaust Pipes
Explore our best-selling Dodge parts for the 2000 Ram 3500 among 9 OEM and aftermarket options starting from $18.79.
Dynomax – Exhaust Tail Pipe (Part No.54150)
from
$78.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS¿–¿Made from aluminized steel for durability and long life
- PREMIUM MATERIALS┐–┐Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust Tail Pipe 3" Inlet (OD) (Part No.56125)
from
$139.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
MagnaFlow – Performance Exhaust Tailpipe (Part No.15452)
from
$163.99
The MagnaFlow Performance Exhaust Tailpipe 15452 is engineered as a universal component for your truck’s exhaust system and optimized for superior flow characteristics and performance. 15452 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.52314)
from
$41.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Exhaust Pipe 3.5" Inlet (ID) 3" Outlet (OD) (Part No.55336)
from
$78.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dynomax – 36477 Exhaust Pipe Spout (Part No.36477)
from
$51.99
Customize your exhaust system with a DynoMax® stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax® logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
MagnaFlow – Exhaust Diesel Pipe (Part No.15451)
from
$111.99
The MagnaFlow 4″ X 34″ Extension 15451 includes a 34in. long, 4in. diameter stainless steel pipe optimized for superior flow characteristics and performance. 15451 is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Superior flow & performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Dynomax – Exhaust Pipe (Part No.55144)
from
$86.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.51019)
from
$18.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Top-Rated Exhaust Parts Brands For Your 2000 Dodge Ram 3500
Shop for the best-rated brands offering Exhaust Parts and other products for your 2000 Dodge Ram 3500s. Below you’ll find some of our best rated Exhaust Parts from Walker and Dorman, and more. Exhaust Parts from these brands that fit a 2000 Ram 3500 start at just $6.79 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Walker 2000 Dodge Ram 3500 Exhaust Parts
When it comes to maintaining or upgrading your 2000 Dodge Ram 3500, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 2000 Dodge Ram 3500. With over 9 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.79, with an average price of just $91.65. Plus, with over 71 customer reviews and an average rating of 4 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$229.99
$229.99
This product is not rated
SoundFX Muffler, Direct Replacement, No Fabrication Needed
“”
Popular Dorman 2000 Dodge Ram 3500 Exhaust Parts
Dorman auto parts is one of the highest quality Exhaust Part brands in the market. Any 2000 Dodge Ram 3500 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2000 Ram 3500, Advance Auto Parts carries a full inventory of 3 Dorman Exhaust Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Dorman Exhaust Parts range from $15.99 to $238.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$40.99
$40.99
This product is not rated
Install kit for mounting exhaust manifold to engine includes 12 -10X1.50mm bolts
“”
FAQs for 2000 Dodge Ram 3500 Exhaust Parts
Which Exhaust Parts are best-sellers for 2000 Dodge Ram 3500s?
Out of 32 Exhaust Parts that fit 2000 Dodge Ram 3500s, the following parts are the top sellers:
- Exhaust Stud Kit – 3/18-16 x 2-1/2 In. (22148630) – $15.99
- Exhaust Manifold Gasket Set (20688864) – $21.49
- Install kit for mounting exhaust manifold to engine includes 12 -10X1.50mm bolts (10422264) – $40.99
What’s the price range for 2000 Dodge Ram 3500 Exhaust Parts?
Exhaust Part prices for the 2000 Dodge Ram 3500 start at $6.79 and go up to $745.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2000 Dodge Ram 3500?
The average price for Exhaust Parts for the 2000 Dodge Ram 3500 is $218.90. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Dodge Ram 3500 model years?
What are the cheapest Exhaust Parts for my 2000 Dodge Ram 3500?
The cheapest 2000 Dodge Ram 3500 Exhaust Parts we carry in stock are:
- Exhaust 35460 Exhaust System Hanger Insulator (5601657) – $6.79
- Exhaust Clamp (10083053) – $10.29
- Exhaust Stud Kit – 3/18-16 x 2-1/2 In. (22148630) – $15.99
- Exhaust Hanger (12107758) – $17.84
- Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (18390584) – $18.79
What are the top-rated Exhaust Parts that fit the 2000 Dodge Ram 3500?
Out of 86 reviews by customers, our 2000 Dodge Ram 3500 Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2000 Dodge Ram 3500 and their top-rated products:
- Exhaust Mufflers
- Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (20291330) – $249.99
- Exhaust Fittings
- Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (20291330) – $249.99
What types of Exhaust Parts do you sell for my 2000 Dodge Ram 3500?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2000 Dodge Ram 3500:
Can I get help with 2000 Dodge Ram 3500 Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.
What is your return policy for Dodge Ram 3500 Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Dodge Ram 3500 Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
