from

$159.99

New Standard Replacement Driver Or Passenger Side Rear Inner Wheel House, 36 X 12 X 7

Product Features:

36 X 12 X 7, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$404.99

CCI Offers One Of The Largest Selection Of Automotive Wheel Restyling Accessories For Cars, Trucks, And SUV’s. All CCI Products Are Designed And Manufactured For Both Quality And Fitment And Carry A Limited Lifetime Guarantee.

Product Features:

Designed And Manufactured To Fit Over And Into The OEM Wheel, Easy Installation
Manufactured With Automotive Grade ABS And Durable
Upgrades OEM Wheel Appearance, Increased Aesthetic Value And Trim Level Appearance
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$26.99

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.

from

$54.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Designed to be used on worn axle shafts
Precision manufactured using premium-grade steel for outstanding durability and performance
Premium double seal design keeps out dirt and contaminants and retains lubrication
Industry leading coverage
Professional technicians know they can depend on National

from

$29.99

Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.

Product Features:

Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads
Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.99

The original lug nut on certain vehicles has a failure-prone two-piece design that makes rust common and repair difficult. This Dorman OE FIX replacement has a one-piece, carbon steel design to prevent future problems. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Wheel Nut M14-1.50 Flattop Nut – 22mm Hex, 44.5mm Length
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Dometop, 1.752″ Length, Chrome, 1 Pack
Improved design – this replacement lug nut changes the original two-piece design to one piece for greater reliability
Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards

from

$135.99

Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$261.99

CCI Impostor wheel skins are an easy and affordable way to upgrade the trim level appearance of your vehicle. Constructed of ABS plastic and available in a variety of finishes, CCI Impostor wheel skins are simple to install and provide years of head-turning style. Pair them with CCI grille overlays, mirror covers and door handle covers to complete the look.

Product Features:

Designed and manufactured for quality fitment and finish
Easy to install, long lasting finish
Manufactured with automotive grade ABS, Quality and durable product
Emulates factory styling and enhances OEM design
Dual layer of clear, enhances and protects paint
Center hub retention, secure fitment and easy to install

from

$8.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$191.99

Carquest Professional hub assemblies are designed by a leading original equipment manufacturer (O.E.M.) and built to meet or exceed OE specifications for a perfect fit and proven performance. Carquest Professional hub assemblies feature bearings and seals that are designed for each specific vehicle application for a more durable repair solution. These hub assemblies are rigorously tested to ensure long-lasting performance that is guaranteed with an industry-leading warranty.

Product Features:

Manufactured on a semi-automated production line that helps ensure superior quality
Multiple tests completed to ensure long-lasting performance
All ABS sensors are tested for proper signal functionality
Enhanced corrosion resistant wheel studs to reduce rust build-up
Precision-machined to stringent tolerances provided high quality and longer endurance
Bearings and seals are constructed and engineered to the requirements of vehicle application
Roll-form bearing design applies exact preload for increased durability (where applicable)

from

$286.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$44.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use under wheel covers, center caps and hub caps.
Will accept O.E.M. GM screw on plastic lug nut caps.

from

$34.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.

from

$9.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$9.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.49

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$2.82

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

from

$144.99

Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Designed And Manufactured To Fit Directly Into The OEM Wheel
Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
Installs In Minutes Without Tools And Stays Securely Attached Until Removed

from

$2.49

This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:

Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
Quality materials – manufactured for durability and a quality finish
Simple installation – no special tools required
Quality tested – this part has undergone dimensional testing to ensure a quality fit

from

$78.99

This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$58.99

Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:

Time-saving design – the unique split dust shield design reduces install time an average of an hour per shield
Longer service life – corrosion-resistant steel construction protects brakes from elements and debris
Precision-engineered – undergone dimensional verification and salt spray testing to ensure this part conforms to product standards and quality
Trustworthy quality – engineered and inspected in the United States

from

$88.99

Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:

Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications
Longer service life – corrosion-resistant steel construction protects brakes from elements and debris
Ideal fix – directly replaces highly deterioration-prone original part
Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality

from

$1.99

Parts Kit For Chry/Gm

from

$5.99

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Rubber snap-in stem
Press clip design
No tools for press clip installation
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$4.49

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Electroless nickel-plated valve cores
Advanced anodization of valve stems and hex nuts
Includes torque specifications and installation instructions
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$249.99

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

from

$299.99

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For aluminum wheels only.
Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

2000 Chevrolet Silverado 1500 Wheels and Tires

More 2000 Chevrolet Silverado 1500 Wheels and Tires Categories

Essential 2000 Chevrolet Silverado 1500 Wheels and Tires

KAI – Wheel Housing (Part No.RRP3817)

COAST TO COAST – 20", 5 Spokes, Snap-On/Center Retention, Gloss Black, Abs Plastic, Set Of 4 (Part No.IMP454BLK)

McGard – Chrome Cone Seat Style Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64014)

National – Multi Purpose Bearing (Part No.RP-1561-GM)

Dorman – Hub And Bearing Mounting Bolts (Part No.917-517)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Dometop, 1.752" Length, Chrome, 1 Pack (Part No.611-236.1)

COAST TO COAST – 17 Inch, 8 Hole, Snap-On, Plated, Chrome, Abs Plastic, Set Of 4 (Part No.IWCIMP64X)

COAST TO COAST – 18 Inch, 5 Split Spoke, Painted, Gloss Black, Abs Plastic, Set Of 4 (Part No.IWCIMP432BLK)

National – Bearings (Part No.SCH-78)

Carquest Professional – Hub Assembly with Wheel Bearing 94-02566 (Part No.94-02566)

Carquest Premium – Hub Assembly with Wheel Bearing 94-545855 (Part No.94-545855)

McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24019)

McGard – Chrome Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24210)

National – Multi Purpose Seal (Part No.4762N)

Driveworks – Oil Seal (Part No.S-710105)

Dorman – Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No.610-428)

Dorman – Serrated Wheel Stud (Part No.O8060833056DOR)

COAST TO COAST – Chrome Plated, Aluminum, Set Of 4, Bolt-On Lug Covers (Part No.IWCC5129C)

Dorman – Wheel Lug Nut Cover: M27-2.0 Thread, 22 mm Hex, 39.4 mm Depth, Plastic, Black (Sold by each) (Part No.611-607)

Dorman – Wheel Center Hub Cap (Part No.909-001)

Dorman – Brake Dust Shield – 1 Split Pair (Part No.924-222)

Dorman – Brake Dust Shield – 1 Pair (Part No.924-493)

Xtra Seal – Parts Kit For Chry/Gm (Part No.15-20201)

REDI-Sensor – Rubber snap in stem with metal press clip teeth (Part No.SE54196)

REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)

McGard – Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size) (Part No.84640)

McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65510BK)

Popular 2000 Chevrolet Silverado 1500 Wheels and Tires Categories

2000 Chevrolet Silverado 1500 Wheels and Tires

Top-Rated Wheels and Tires Brands For Your 2000 Chevrolet Silverado 1500

Popular Driveworks Wheels and Tires

Top-Rated Driveworks Wheels and Tires

FAQs for 2000 Chevrolet Silverado 1500 Wheels and Tires

What are the most purchased Wheels and Tires for the 2000 Chevrolet Silverado 1500?

What are the top-rated 2000 Chevrolet Silverado 1500 Wheels and Tires?

More Popular Parts for All Makes