2000 Chevrolet S10 Drivetrains

Popular 2000 Chevrolet S10 Drivetrains Categories

Essential Drivetrains for 2000 Chevrolet S10s

Felpro – TRANSFER CASE GASKET SET (Part No.72769)

TRANSFER CASE GASKET SET

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

Pinion Install Kit For GM 8.5" Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Pro-King – Differential Internal Nest Kit (Part No.741B717)

Differential Internal Nest Kit

from

$223.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In. (Part No.615-065.1)

Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In.

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Carquest Premium – 4WD Indicator Light Switch (Part No.FWA1023)

    4WD Indicator Light Switch

    from

    $18.79
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $78.99
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1984-2020
    • Weight approx: 4 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: SQUARE FRAME
    See More

    Yukon Gear – Positraction Clutch Guide (Part No.33352)

    Positraction Clutch Guide

    from

    $8.99
    Positraction clutch guide.

    Product Features:
    • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
    • Compatible with Dura Grip positractions only
    See More

    Driveworks – Taper Bearing Set (Part No.S-A-18)

    Taper Bearing Set

    from

    $10.79
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    MOOG Driveline Products – Double Cardan CV Ball Seat Repair Kit (Part No.606)

    Double Cardan CV Ball Seat Repair Kit

    from

    $33.49
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Designed for ease of installation
    • Includes necessary hardware
    • Designed for superior performance
    • Designed for ultimate strength
    • Increased tolerance for a performance fit
    • Meets deflection parameters
    See More

    National – Bearings (Part No.208-LO)

    Bearings

    from

    $49.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    EVO Driveline – Transfer Case Assembly (Part No.UMT108-3M)

    Transfer Case Assembly

    from

    $1118.99
    Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

    Product Features:
    • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
    • OEM cores are processed as individual units throughout the tear down and assembly process
    • Cores cleaned using our Hydro Blast cleaning and rinse process
    • All case halves wet sanded to ensure perfect mating surfaces
    • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
    • Remanufactured in our ISO9001:2008 USA facility.
    • Without Motor
    See More

    Pro-King – Differential Cover Plug (Part No.742G484)

    Differential Cover Plug

    from

    $6.59
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Driveworks – Transfer Case Output Shaft Seal (Part No.S-710496)

    Transfer Case Output Shaft Seal

    from

    $23.99
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Standard Open Cross Pin (0.795" Diameter) For 8.5" GM – Fits Some Eaton Positractions (Part No.33401)

    Standard Open Cross Pin (0.795" Diameter) For 8.5" GM - Fits Some Eaton Positractions

    from

    $49.99
    Standard open cross pin (0.795″ diameter) for 8.5″ GM. fits some Eaton positractions.

    Product Features:
    • Cross pin shaft for GM 8.5″ and 8.6″
    • Fits standard open differentials only
    • 0.795″ diameter
    See More

    FAG US – SHAFT SEAL (Part No.SS2588)

    SHAFT SEAL

    from

    $27.49
    SHAFT SEAL

    Carquest Premium – Vehicle Speed Sensor (Part No.SBA3658)

    Vehicle Speed Sensor

    from

    $42.99
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Pro-King – Differential Ring Gear Bolt (Part No.741B935)

    Differential Ring Gear Bolt

    from

    $2.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Driveworks – Differential Seal (Part No.S-223255)

    Differential Seal

    from

    $7.49
    Product Features:
    • Brand may vary by location
    See More

    National – Shaft Repair Sleeve (Part No.99225)

    Shaft Repair Sleeve

    from

    $28.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter (Part No.614-004)

    Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter

    from

    $29.99
    This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)

    Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter

    from

    $32.99
    This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)

    Split CV Boot - With Quick Drying Adhesive

    from

    $42.99
    This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

    Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

    from

    $51.99
    This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Upgrade your 2000 Chevrolet S10 with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 2000 Chevrolet S10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your S10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 531 Drivetrains for the 2000 Chevrolet S10, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to 4WD Components upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2000 Chevrolet S10 at great prices. Our Drivetrains inventory for this model ranges from just $1.99 to $1,839.99, with an average price of $192.06. Our 531 Drivetrains in stock come from 34 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet S10 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet S10, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Royal Purple, Moog, and more. Valvoline Drivetrains start at just $12.49 and boast an impressive 5 stars average rating from customers. Royal Purple and Moog also bring quality to the table, with Drivetrains available starting at $11.99, and at an average 5 stars rating. With 4,280 customer reviews and counting, our 2000 Chevrolet S10 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Chevrolet S10 is always ready to roll. We’re committed to providing you with everything you need to keep your S10 in top shape, all in one place. Start shopping confidently below for your 2000 Chevrolet S10!

    Best-Selling Drive Shafts and Axles for 2000 Chevrolet S10s

    Enhance the driving experience in your Chevrolet with 66 quality Drive Shafts and Axle components, starting at $1.99.

    Driveworks – Oil Seal (Part No.S-8660S)

    Oil Seal

    from

    $5.49
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.710491)

    Multi Purpose Seal

    from

    $17.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $78.99
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1984-2020
    • Weight approx: 4 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: SQUARE FRAME
    See More

    Dorman – Help – Axle Shaft Retainer (Part No.05311)

    Axle Shaft Retainer

    from

    $6.49
    An imperative replacement part for the proper functioning of the axle shaft and for basic vehicle operation, our Axle Shaft Lock C-Clips are made from quality materials for long-lasting durability.

    Product Features:
    • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    National – Shaft Repair Sleeve (Part No.99174)

    Shaft Repair Sleeve

    from

    $45.49
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Pro-King – Differential Axle Seal (Part No.742A074)

    Differential Axle Seal

    from

    $6.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10205)

    CV Axle Shaft Assembly

    from

    $138.99
    All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
    See More

    Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

    Axle Shaft Lock Assortment

    from

    $6.49
    This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10204)

    CV Axle Shaft Assembly

    from

    $127.99
    Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • 100% new axle and components
    • New axle nut or attaching hardware included when applicable
    • Bearings, races and housings are heat-treated for longer life
    • Precision-engineered seal mating surfaces for leak-free performance
    • High moly CV joint grease with stainless-steel boot bands
    See More

    Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

    Axle Repair Bearing

    from

    $16.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $22.79
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2018
    • Weight approx: 3 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: ROUND FRAME
    • COMPLETE MOUNT
    See More

    Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)

    R1563Tav Rear Axle Bearing And Seal Kit

    from

    $42.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

    Product Features:
    • Includes axle bearing and seal
    • Services one side
    • Torrington Brand
    • 2.250″ O.D.
    • 1.400″ I.D.
    See More

    Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

    R1559Tv Rear Axle Bearing And Seal Kit

    from

    $52.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

    Product Features:
    • Includes axle bearing and seal
    • Services one side
    • Torrington Brand
    • 2.530″ O.D.
    • 1.620″ I.D.
    See More

    SKF – Axle Seal (Part No.K4021285300SKF)

    Axle Seal

    from

    $8.03
    SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

    Product Features:
    • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
    • The flanged design allows for easier and proper installation and helps avoid cocking.
    • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
    • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
    See More

    Yukon Gear – C/Clip (Part No.33083)

    C/Clip

    from

    $8.99
    C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

    Product Features:
    • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
    • .150″ thick
    See More

    Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

    Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal

    from

    $24.99
    Product Features:
    • Fits GM 8.6″ and 9.5″
    • Sleeve to adapt standard yoke to use late model triple lip pinion seal
    See More

    Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

    GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

    from

    $89.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

    Product Features:
    • Includes axle bearing and seal
    • Services one side
    • 2.800″ O.D.
    • 1.620″ I.D.
    See More

    GM Genuine Parts – Front Drive Axle Inner Shaft Bearing (Part No.26053326)

    Front Drive Axle Inner Shaft Bearing

    from

    $13.49
    GM Genuine Parts Axle Shaft Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support and allow the axle shaft to rotate with minimal friction. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

    Product Features:
    • Supports and allows the axle shaft to rotate with minimal friction
    • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
    • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
    • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
    • GM regularly updates production and service part designs to integrate new materials and technologies
    See More

    Dorman – Spindle Nut (Part No.K10021062725DOR)

    Spindle Nut

    from

    $17.00
    Spindle Nut

    Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

    Axle Seal, For 1559 Or 6408 Bearing

    from

    $7.99
    Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

    Product Features:
    • Rear axle seal
    • 2.530″ O.D.
    See More

    National – Multi Purpose Seal (Part No.4529N)

    Multi Purpose Seal

    from

    $10.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Bearings (Part No.HK-4012)

    Bearings

    from

    $24.29
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Available in both caged design and full complement
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

    C/Clip For GM 7.5", 7.6" & 8"

    from

    $14.99
    Product Features:
    • c-clip for GM 7.5″, 7.625″ and 8.0″
    See More

    Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

    Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

    from

    $51.99
    This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)

    Axle Seal For '88 And Newer GM 8.5" Chevy C10

    from

    $11.99
    Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.

    Product Features:
    • Rear axle seal
    • Fits 1988 and up GM half ton truck
    • 2.800″ O.D.
    • 1.620″ I.D.
    See More

    National – Bearings (Part No.307-FFL5)

    Bearings

    from

    $77.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Bearing (Part No.HB-88530)

    Multi Purpose Bearing

    from

    $144.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Axle Shaft Seal (Part No.S-710491)

    Axle Shaft Seal

    from

    $47.99
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    SKF – Driveshaft Support with Bearing (Part No.K1030285149SKF)

    Driveshaft Support with Bearing

    from

    $239.96
    Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

    Product Features:
    • OE Quality, fit and performance
    • Precise driveshaft alignment and support
    • Pre-lubricated and sealed
    • Metal reinforced seals to prevent contamination
    • Manufactured from durable rubber compounds
    See More

    National – Bearings (Part No.110-L)

    Bearings

    from

    $83.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Clutch Release Bearing (Part No.S-B-2010)

    Clutch Release Bearing

    from

    $8.49
    Product Features:
    • Brand may vary by location
    See More

    Dorman – Rear Drive Shaft (Part No.946-308)

    Rear Drive Shaft

    from

    $811.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft: Greaseable (Part No.976-813)

    Rear Drive Shaft: Greaseable

    from

    $782.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft (Part No.976-042)

    Rear Drive Shaft

    from

    $761.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft: Adjustable (Part No.976-027)

    Rear Drive Shaft: Adjustable

    from

    $755.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    USA Standard Gear – Driveshaft – Front (Part No.44264)

    Driveshaft - Front

    from

    $683.99
    Driveshaft – Front

    Dorman – Front Drive Shaft (Part No.938-080)

    Front Drive Shaft

    from

    $623.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9359)

    Drive Shaft: Not Greasable, Direct Replacement

    from

    $429.99
    CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

    Product Features:
    • Built to match O.E. form, fit and function.
    • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
    • All slip yokes are lubricated to prevent premature wear.
    • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
    See More

    Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9329)

    Drive Shaft: Not Greasable, Direct Replacement

    from

    $395.99
    CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

    Product Features:
    • Built to match O.E. form, fit and function.
    • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
    • All slip yokes are lubricated to prevent premature wear.
    • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
    See More

    Dorman – Front Drive Shaft (Part No.938-083)

    Front Drive Shaft

    from

    $369.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Autopart International Inc – Axle Assembly (Part No.K40002075228API)

    Axle Assembly

    from

    $158.00
    Axle Assembly

    Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)

    7.5" & 8.2" GM Redi Sleeve Yoke Saver

    from

    $136.99
    7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits GM 7.5″, 7.625″ and 8.2″
    See More

    FAG – Wheel Bearing (Part No.K8000204410FAG)

    Wheel Bearing

    from

    $75.93
    Wheel Bearing

    Spicer – Center Support Bearing (Part No.210370-1X)

    Center Support Bearing

    from

    $66.99
    Center Support Bearing

    FAG US – BEARING – CRB (Part No.102549)

    BEARING - CRB

    from

    $64.99
    BEARING – CRB

    Yukon Gear – Thrust Washer Kit For GM 7.2" IFS Stub Shaft (Part No.33526)

    Thrust Washer Kit For GM 7.2" IFS Stub Shaft

    from

    $46.99
    Product Features:
    • Thrust washer kit
    • Fits GM 7.2″ IFS
    See More

    Yukon Gear – 7.2IFS GM 01 & Up Envoy Disconnect Housing Seal (Part No.30292)

    7.2IFS GM 01 & Up Envoy Disconnect Housing Seal

    from

    $44.99
    7.2IFS GM 01 & up Envoy disconnect housing seal.

    Product Features:
    • Disconnect housing seal
    • Fits 2001 and up GM 7.2″ IFS in GMC Envoy
    See More

    Most Popular 2000 Chevrolet S10 4WD Components

    Customize your Chevrolet with 12 4WD Components products like 4WD Actuator Switches, 4WD Switches, and 4WD Actuator Cables, all priced under $131.99.

    Dorman – 4WD Actuator Control Cable (Part No.600-601)

    4WD Actuator Control Cable

    from

    $39.49
    This 4WD actuator cable directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

    Product Features:
    • Direct replacement – this 4WD actuator cable matches the fit and function of the original cable on certain vehicle years, makes and models.
    • Effective fix – installation restores four-wheel drive function interrupted by a failed original cable.
    • Related repair – recommended for replacement when installing a new axle actuator
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Dorman – Four Wheel Drive Selector Switch – Dash Mount; With Electric Shift (Part No.901-061)

    Four Wheel Drive Selector Switch - Dash Mount; With Electric Shift

    from

    $45.99
    This 4WD switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this 4WD switch is made to match the fit and function of the original switch on specific vehicle applications.
    • Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Four Wheel Drive Selector Switch – Dash Mount; without/Electric Shift (Part No.901-060)

    Four Wheel Drive Selector Switch - Dash Mount; without/Electric Shift

    from

    $37.99
    This 4WD switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this 4WD switch is made to match the fit and function of the original switch on specific vehicle applications.
    • Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Carquest – 4WD Switch (Part No.FWA120)

    4WD Switch

    from

    $46.05
    High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

    Product Features:
    • Designed to OE standards for ease of installation
    • High-quality materials withstand extreme conditions
    • Undergoes extensive testing to ensure reliability
    • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
    See More

    Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1174)

    4WD Indicator Light Switch Connector

    from

    $35.49
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

    Product Features:
    • Premium quality materials for longer service life
    • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
    • Global coverage for import and/or domestic applications
    • OE specified wire gauge to ensure a reliable electrical connection
    • Designed to meet or exceed OE specifications in form, fit and function
    See More

    Dorman – 4WD Front Differential Actuator (Part No.600-102XD)

    4WD Front Differential Actuator

    from

    $131.99
    This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

    Product Features:
    • Improved design – this 4WD actuator has been redesigned to eliminate common failures in the original part caused by exposure to ozone.
    • Upgraded materials – the rubber diaphragm in this 4WD actuator is reinforced with a mesh layer to provide 3X greater durability than the original material.
    • Seamless repair – this upgraded 4WD actuator matches the fit and function of the original part for a trouble-free installation
    • Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Carquest Premium – 4WD Switch (Part No.FWC1021)

    4WD Switch

    from

    $49.49
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Carquest Premium – 4WD Actuator (Part No.FWC1091)

    4WD Actuator

    from

    $80.99
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Carquest Premium – 4WD Actuator (Part No.ECA1362)

    4WD Actuator

    from

    $43.99
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Carquest Premium – 4WD Switch (Part No.FWC1031)

    4WD Switch

    from

    $40.99
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Carquest Premium – 4WD Indicator Light Switch (Part No.FWA1001)

    4WD Indicator Light Switch

    from

    $32.99
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Carquest Premium – 4WD Indicator Light Switch (Part No.FWA1023)

    4WD Indicator Light Switch

    from

    $18.79
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    Top Picks for 2000 Chevrolet S10 Differentials

    Upgrade Chevrolet S10s with top-quality Differentials parts, including 359 OEM and aftermarket selections for your 2000 model.

    Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    from

    $14.49
    Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

    Product Features:
    • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

    High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

    from

    $12.99
    High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

    Product Features:
    • Better Wear Protection
    • Increased Protection against Low Speed Pre-Ignition
    • Increased Fuel Efficiency
    • Better Protection for Vehicle Exhaust Emissions Equipment
    • Improved Compatibility with Fuels Containing Ethanol
    • Superior Corrosion Protection
    • Made in USA
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

    High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

    from

    $32.99
    Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

    Product Features:
    • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
    • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
    • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
    • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
    • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 55072)

    DIFFERENTIAL GASKET

    from

    $7.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Dorman – Rear Axle Shaft, Left or Right (Part No.630-111)

    Rear Axle Shaft, Left or Right

    from

    $184.99
    Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

    Product Features:
    • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
    • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
    • Durable construction – designed to rigorous standards and tested to ensure performance
    • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
    See More

    National – Shaft Repair Sleeve (Part No.99139)

    Shaft Repair Sleeve

    from

    $39.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1100)

    Differential Pinion Shim Kit

    from

    $7.49
    High-quality Differential Component Shim

    Product Features:
    • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.GM7.6BI)

    Differential Carrier Gear Kit

    from

    $159.99


    Product Features:
    • INTERNAL KIT-GM 7.6″ W/28 SPLINE
    See More

    National – Wheel Bearing and Seal Kit (Part No.RA-320)

    Wheel Bearing and Seal Kit

    from

    $151.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Spindle bearing and seal kit
    • Includes all components required to complete the repair
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI-30)

    Differential Carrier Gear Kit

    from

    $153.99


    Product Features:
    • GM10 BOLT 8.5″ 30 SPL INTERNAL KIT 1988-1999 (OPEN)
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)

    Differential Ring and Pinion

    from

    $235.99


    Product Features:
    • GM 10BL 8.5 R/P 3.42A MG FRT/REAR
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.R7.5GRLT)

    Differential Bearing Kit - Timken

    from

    $109.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • GM7.5 TIMKEN BRG & SEAL KIT ’99-UP
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

    Differential Cover Gasket

    from

    $9.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

    Transfer Case Fluid, 1 Quart

    from

    $14.99
    Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

    Product Features:
    • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
    • Formulated to help prevent gear wear and protect against rust and corrosion
    • Formulated to deliver enhanced protection against deposits
    • Helps provide better protection during extreme operating conditions
    See More

    Driveworks – Taper Bearing Set (Part No.S-A-18)

    Taper Bearing Set

    from

    $10.79
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Dorman – Rear Differential Cover (Part No.697-701)

    Rear Differential Cover

    from

    $20.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    National – Axle Differential Bearing and Seal Kit (Part No.RA-321-C)

    Axle Differential Bearing and Seal Kit

    from

    $103.99
    The National® bearing & seal kit includes all the components required to complete the repair.

    Product Features:
    • COMPLETE SOLUTION — Includes everything needed to complete the repair
    • STRONG AND DURABLE — Controlled heat treatment process for strength and durability
    • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
    • RIGOROUS TESTING¿-¿Comprehensive¿testing throughout design and development processes by National engineers for quality you can count on¿
    • RIGOROUS TESTING┐-┐Comprehensive┐testing throughout design and development processes by National engineers for quality you can count on┐
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R10RL)

    Differential Bearing Kit - Koyo

    from

    $99.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT-BRG & SEAL GM 8.5 10 BOLT – ’99 & UP LATER
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10RLMK)

    Differential Master Bearing Kit - Koyo

    from

    $157.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • BEARING GASKET & SEAL KIT, 10 BOLT GM ’99 AND UP MASTER KIT
    See More

    Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

    Type TLS Automatic Transmission Fluid - 1 qt

    from

    $11.79
    Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

    Product Features:
    • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
    • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
    • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
    • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
    • Advanced anti-wear technology provides maximum protection to gears and bearings
    • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)

    Differential Ring and Pinion

    from

    $241.99


    Product Features:
    • GM 10BL 8.5 R/P 3.73A MG FRT/REAR
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

    Differential Shaft Lock Bolt

    from

    $5.99
    This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    National – Multi Purpose Seal (Part No.710506)

    Multi Purpose Seal

    from

    $16.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

    Differential Yoke including Seal and Pinion Nut

    from

    $139.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Dorman – Rear Differential Cover (Part No.697-700)

    Rear Differential Cover

    from

    $32.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-373)

    Differential Ring and Pinion

    from

    $243.99


    Product Features:
    • GM 10BL 8.5 R/P 3.73 MG FRT/REAR
    See More

    ATP – DIFF COVER KIT (Part No.111107)

    DIFF COVER KIT

    from

    $52.99
    DIFF COVER KIT

    Dorman – Rear Differential Cover (Part No.697-706)

    Rear Differential Cover

    from

    $51.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1101)

    Differential Carrier Shim Kit

    from

    $8.49
    High-quality Differential Carrier Shim Kit

    Product Features:
    • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    National – Bearings (Part No.207)

    Bearings

    from

    $32.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Motive Gear – Ring Gear Bolt (Part No.14066913)

    Ring Gear Bolt

    from

    $2.49


    Product Features:
    • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
    See More

    Yukon Gear – Differential Cover B (Part No.33572)

    Differential Cover B

    from

    $7.99
    Differential Cover B

    Yukon Gear – Ring Gear Bolt (Part No.33049)

    Ring Gear Bolt

    from

    $6.99
    Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
    • 7/16″ x 20
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Dorman – Help – Pinion Crush Sleeves (Part No.81057)

    Pinion Crush Sleeves

    from

    $5.29
    This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
    • Required replacement – when servicing the differential
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

    from

    $12.99
    Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

    Product Features:
    • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
    • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
    • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
    • Reduces friction and metal-to-metal contact for peak engine performance
    • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
    • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
    See More

    Dorman – Help – Pinion Crush Sleeves (Part No.81058)

    Pinion Crush Sleeves

    from

    $6.49
    This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
    • Required replacement – when servicing the differential
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

    8.6" GM Standard Open Side Gear Thrust Washer

    from

    $4.99
    8.6″ GM standard Open side gear Thrust washer.

    Product Features:
    • Side gear thrust washer
    • Fits GM 8.6″
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

    Tapered Roller Bearing

    from

    $16.99
    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Pinion Seal (Part No.8610)

    Pinion Seal

    from

    $3.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    MOOG – Differential Carrier Bushing (Part No.K6572)

    Differential Carrier Bushing

    from

    $15.29
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Manufactured from high quality elastomer compounds for durability and ride performance
    • Assembled with proper precompression for ultimate in performance and feel
    • High level bonding adhesive is used for durability
    • Elastomer compounds do not utilize any reground rubber fillers
    See More

    ATP – DIFF COVER KIT (Part No.111102)

    DIFF COVER KIT

    from

    $29.99
    DIFF COVER KIT

    In-Demand Universal Joints for 2000 Chevrolet S10s

    Select from 36 premium Universal Joints parts for your 2000 Chevrolet S10, with prices ranging from $2.59 to $449.99.

    Driveworks – Universal Joint (Part No.DW-445)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Double Cardan CV Ball Seat Repair Kit (Part No.606)

    Double Cardan CV Ball Seat Repair Kit

    from

    $33.49
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Designed for ease of installation
    • Includes necessary hardware
    • Designed for superior performance
    • Designed for ultimate strength
    • Increased tolerance for a performance fit
    • Meets deflection parameters
    See More

    Neapco – Universal Joint (Part No.1-0025)

    Universal Joint

    from

    $2.59
    Universal Joint Strap Kit
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

    Greaseable Premium Universal Joint

    from

    $26.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Driveworks – Universal Joint (Part No.DW-534G)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging to provide higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting allows for easy maintenance and the flexible use of the entire assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals are applied to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

    Universal Joint Strap Kit

    from

    $11.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 355, 372 & 534G
    • Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Spicer – Universal Joint (Part No.5-795X)

    Universal Joint

    from

    $50.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Neapco – Universal Joint (Part No.2-3010)

    Universal Joint

    from

    $8.99
    Universal Joint
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

    Greaseable Super Strength Universal Joint

    from

    $34.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Spicer – Universal Joint (Part No.5-3147X)

    Universal Joint

    from

    $32.49
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Driveworks – Universal Joint (Part No.DW-235)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.445)

    Greaseable Premium Universal Joint

    from

    $24.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Neapco – Universal Joint (Part No.2-3011)

    Universal Joint

    from

    $4.59
    Universal Joint
    See More

    Dorman – Help – U-Joint Repair Kit (Part No.81001)

    U-Joint Repair Kit

    from

    $11.49
    This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
    • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.360-10)

    Universal Joint Strap Kit

    from

    $11.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 354, 368, 369, 445 & 455
    • Contains two 1.59″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
    See More

    Dorman – Help – U-Joint Repair Kit (Part No.81000)

    U-Joint Repair Kit

    from

    $6.99
    This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
    • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

    1310 U/Joint With Zerk Fitting On Cross

    from

    $44.99
    Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

    1310 To 1330 Adapter U/Joint

    from

    $59.99
    Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
    See More

    Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

    1350 To 1410 Conversion U/Joint

    from

    $78.99
    Yukon 1350 to 1410 conversion u/joint.
    See More

    Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

    1310 To Mechanics 3R Adapter U/Joint

    from

    $109.99
    Yukon 1310 to Mechanics 3R adapter U/Joint.
    See More

    Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

    1350 Lifetime Series U/Joint

    from

    $63.99
    Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
    See More

    Spicer – Lube For Life Non Greasable U-Joint (Part No.K1010991357SPI)

    Lube For Life Non Greasable U-Joint

    from

    $54.03
    Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they’re pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, as well as greasable and non-greasable styles. Order the model designed for fitment with your vehicle and engine type.

    Product Features:
    • Forged cross
    • Lubeable
    • O.E.M replacement
    • Snap rings
    See More

    Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

    1350 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – Mechanics 3R Lifetime Series U/Joint (Part No.42020)

    Mechanics 3R Lifetime Series U/Joint

    from

    $65.99
    Yukon Mechanics 3R Lifetime Series U/Joint. 2.556″ span ring span, 1.125″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – 7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R (Part No.41201)

    7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R

    from

    $23.99
    7.5″ and 8.5″ GM rear U/joint strap, Mech 3R.

    Product Features:
    • u-joint strap
    • Fits GM 7.5″, 7.625″ and 8.5″
    • Mechanics 3R u-joint size
    • One single strap
    See More

    Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

    1310 Lifetime U/Joint

    from

    $57.99
    1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)

    Yoke For GM 8.5" With A 1310 U/Joint Size

    from

    $449.99
    Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1310 u-joint size
    • Outside snap ring design
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)

    Forged Yoke For GM 8.5" With A 1350 U/Joint Size

    from

    $359.99
    Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Forged steel
    See More

    Yukon Gear – Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design (Part No.41090)

    Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design

    from

    $184.99
    Yukon yoke for GM 7.5″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 7.5″ and 7.625″
    • 27 spline
    • Mechanics 3R u-joint size
    • Inside snap ring design
    • 2.556″ snap ring span
    • 1.125″ cap diameter
    • Strap style
    See More

    Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

    1350 To Mechanics 3R Adaptor U/Joint

    from

    $111.99
    Yukon 1350 to Mechanics 3R adaptor U/joint.
    See More

    Spicer – Universal Joint (Part No.5-3254X)

    Universal Joint

    from

    $49.99
    Universal Joint

    Yukon Gear – Mechanics 3R U/Joint (Part No.42014)

    Mechanics 3R U/Joint

    from

    $46.99
    Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.
    See More

    ACDelco – Professional U-Joint (Part No.K1010577082ACD)

    Professional U-Joint

    from

    $38.93
    An ACDelco Professional, premium aftermarket Universal Joint provides pivot points for driveshafts and is the ideal high-quality aftermarket replacement component for many vehicles on the road today. A universal joint is comprised of a pair of hinges connected at a right angle that transmits power between two driveshafts. This premium aftermarket replacement universal joint is manufactured to meet your expectations for fit, form, and function. ACDelco offers a full line of Professional, premium aftermarket Chassis Parts to keep vehicles riding and handling like new. With competitive warranty coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it’s no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.

    Product Features:
    • Pivot points for driveshafts in your vehicle
    • Comprised of a pair of hinges connected at a right angle
    • Premium, high-quality aftermarket part
    • Thoroughly engineered to meet or exceed your expectations for fit, form, and function
    • Provides the performance and dependability you expect from ACDelco
    See More

    Autopart International Inc – U Joint (Part No.K10102054143API)

    U Joint

    from

    $18.10
    U Joint

    Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)

    U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM

    from

    $8.49
    U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.

    Product Features:
    • u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
    See More

    Most Sold 2000 Chevrolet S10 Transfer Cases

    Explore our best-selling Chevrolet parts for the 2000 S10 among 44 OEM and aftermarket options starting from $3.79.

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Felpro – TRANSFER CASE GASKET SET (Part No.72769)

    TRANSFER CASE GASKET SET

    from

    $19.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Engineered and manufactured specifically for the repair environment
    • Unsurpassed quality you can trust
    • Validated for fit, form, and function
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Cardone – Remanufactured Transfer Case Motor (Part No.48-105)

    Remanufactured Transfer Case Motor

    from

    $194.99
    CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

    Product Features:
    • All motors are 100% torque tested to ensure strength for proper gear engagement.
    • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
    • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
    • Motor magnets are 100% recharged for superior performance and reliability.
    • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    See More

    National – Multi Purpose Seal (Part No.710645)

    Multi Purpose Seal

    from

    $37.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Transfer Case Output Shaft Seal (Part No.S-710496)

    Transfer Case Output Shaft Seal

    from

    $23.99
    Product Features:
    • Brand may vary by location
    See More

    Cardone – Remanufactured Transfer Case Motor (Part No.48-103)

    Remanufactured Transfer Case Motor

    from

    $225.99
    CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

    Product Features:
    • All motors are 100% torque tested to ensure strength for proper gear engagement.
    • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
    • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
    • Motor magnets are 100% recharged for superior performance and reliability.
    • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    See More

    National – Multi Purpose Seal (Part No.710496)

    Multi Purpose Seal

    from

    $39.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Dorman – Transfer Case Shift Motor (Part No.600-906)

    Transfer Case Shift Motor

    from

    $181.99
    Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

    Product Features:
    • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
    • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
    • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
    • Quality assured – vehicle-specific application has been validation tested to ensure quality
    See More

    Dorman – Help – Transfer Case Switch (Part No.49315)

    Transfer Case Switch

    from

    $29.99
    This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

    Product Features:
    • Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications.
    • Effective fix – restores proper 4WD operation after original switch degrades and fails
    • Durable construction – built for reliable longevity, free of defects in materials and craftmanship
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Dorman – Transfer Case Shift Motor (Part No.600-900)

    Transfer Case Shift Motor

    from

    $232.99
    Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

    Product Features:
    • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
    • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
    • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
    • Quality assured – vehicle-specific application has been validation tested to ensure quality
    See More

    Cardone – Remanufactured Transfer Case Motor (Part No.48-107)

    Remanufactured Transfer Case Motor

    from

    $218.99
    CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

    Product Features:
    • All motors are 100% torque tested to ensure strength for proper gear engagement.
    • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
    • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
    • Motor magnets are 100% recharged for superior performance and reliability.
    • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    See More

    Dorman – Transfer Case Shift Motor (Part No.600-901)

    Transfer Case Shift Motor

    from

    $267.99
    Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

    Product Features:
    • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
    • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
    • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
    • Quality assured – vehicle-specific application has been validation tested to ensure quality
    See More

    ACDelco – Vehicle Speed Sensor (Part No.19302667)

    Vehicle Speed Sensor

    from

    $59.99
    ACDelco GM Original Equipment Vehicle Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

    Product Features:
    • GM-recommended replacement part for your GM vehicle’s original factory component
    • Offering the quality, reliability, and durability of GM OE
    • Manufactured to GM OE specification for fit, form, and function
    See More

    Carquest Premium – Vehicle Speed Sensor (Part No.SBA3658)

    Vehicle Speed Sensor

    from

    $42.99
    CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
    See More

    National – Bearings (Part No.SCH-78)

    Bearings

    from

    $7.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Available in both caged design and full complement
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Transfer Case Adapter O-Ring (Part No.926-831)

    Transfer Case Adapter O-Ring

    from

    $12.29
    This transfer case adapter seal matches the fit and function of worn or damaged original equipment part. This seal should be replaced as part any service that requires the transfer case and transmission to be separated.

    Product Features:
    • Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission.
    • Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service.
    • Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
    • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
    See More

    National – Multi Purpose Seal (Part No.341022)

    Multi Purpose Seal

    from

    $8.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    USA Standard Gear – TCase Chain (Part No.71578)

    TCase Chain

    from

    $126.99
    TCase Chain

    National – Multi Purpose Seal (Part No.710668)

    Multi Purpose Seal

    from

    $20.79
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    ACDelco – Trans Case Output Sf (Part No.J1157206932ACD)

    Trans Case Output Sf

    from

    $45.00
    Trans Case Output Sf

    USA Standard Gear – ManTransExtHouseBush (Part No.77793)

    ManTransExtHouseBush

    from

    $8.99
    ManTransExtHouseBush

    USA Standard Gear – TCasePlanetaryCrrier (Part No.74527)

    TCasePlanetaryCrrier

    from

    $297.99
    TCasePlanetaryCrrier

    Dorman – Remanufactured Transfer Case Control Module (Part No.599-100)

    Remanufactured Transfer Case Control Module

    from

    $265.99
    Transfer case control module no longer in control? Restore it cost-effectively with this replacement module that provides the same function and performance of the original on specific vehicles.

    Product Features:
    • Direct replacement – this transfer case control module directly replaces the original equipment modules on certain vehicle years, makes and models.
    • Effective fix – replacement restores transfer case motor control and addresses trouble codes.
    • Thoroughly tested – each module undergoes rigorous testing to ensure reliable performance
    • Trustworthy quality – backed by team of engineers and inspectors in the United States
    See More

    USA Standard Gear – TCase Shift Fork (Part No.74780)

    TCase Shift Fork

    from

    $94.99
    TCase Shift Fork

    National – Multi Purpose Seal (Part No.4813V)

    Multi Purpose Seal

    from

    $8.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Manual Transmission Input Shaft Seal (Part No.S-223020)

    Manual Transmission Input Shaft Seal

    from

    $3.79
    Product Features:
    • Brand may vary by location
    See More

    National – Bearings (Part No.J-2416)

    Bearings

    from

    $26.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Available in both caged design and full complement
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    EVO Driveline – Remanufactured Transfer Case (Part No.UMT136-1)

    Remanufactured Transfer Case

    from

    $1329.99
    Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

    Product Features:
    • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
    • OEM cores are processed as individual units throughout the tear down and assembly process
    • Cores cleaned using our Hydro Blast cleaning and rinse process
    • All case halves wet sanded to ensure perfect mating surfaces
    • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
    • Remanufactured in our ISO9001:2008 USA facility.
    • Without Motor
    See More

    EVO Driveline – Remanufactured Transfer Case (Part No.UMT136-1M)

    Remanufactured Transfer Case

    from

    $1142.99
    Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

    Product Features:
    • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
    • OEM cores are processed as individual units throughout the tear down and assembly process
    • Cores cleaned using our Hydro Blast cleaning and rinse process
    • All case halves wet sanded to ensure perfect mating surfaces
    • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
    • Remanufactured in our ISO9001:2008 USA facility.
    • Without Motor
    See More

    EVO Driveline – Transfer Case Motor (Part No.UMM1233)

    Transfer Case Motor

    from

    $179.99
    Transfer Case Motor

    USA Standard Gear – TCaseShftMdeSlctr (Part No.73909)

    TCaseShftMdeSlctr

    from

    $99.99
    TCaseShftMdeSlctr

    USA Standard Gear – TCaseBrg-SealKit (Part No.75232)

    TCaseBrg-SealKit

    from

    $96.99
    TCaseBrg-SealKit

    National – Bearings (Part No.111)

    Bearings

    from

    $77.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    USA Standard Gear – TCaseRangeShiftHub (Part No.75149)

    TCaseRangeShiftHub

    from

    $67.99
    TCaseRangeShiftHub

    SKF – Input Shaft Seal (Part No.J1156204653SKF)

    Input Shaft Seal

    from

    $41.55
    Input Shaft Seal

    SKF – MT Output Shaft Seal (Part No.J1157204654SKF)

    MT Output Shaft Seal

    from

    $30.16
    MT Output Shaft Seal

    SKF – Input Shaft Seal (Part No.J1156205817SKF)

    Input Shaft Seal

    from

    $21.78
    Input Shaft Seal

    FAG US – CONE (Part No.KM86649)

    CONE

    from

    $18.99
    CONE

    FAG US – BEARING (Part No.6207)

    BEARING

    from

    $15.49
    BEARING

    National – Bearings (Part No.FC-66561)

    Bearings

    from

    $13.29
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Available in both caged design and full complement
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

    TCaseShiftForkInsert

    from

    $11.99
    TCaseShiftForkInsert

    USA Standard Gear – Shift Fork Insert (Part No.71380)

    Shift Fork Insert

    from

    $11.99
    Shift Fork Insert

    FAG US – CUP (Part No.M88010)

    CUP

    from

    $11.29
    CUP

    Top-Rated Drivetrains Brands For Your 2000 Chevrolet S10

    Shop for the best-rated brands offering Drivetrains and other products for your 2000 Chevrolet S10s. Below you’ll find some of our best rated Drivetrains from Valvoline, Royal Purple, and Moog, and more. Drivetrains from these brands that fit a 2000 S10 start at just $11.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Valvoline 2000 Chevrolet S10 Drivetrains

    When it comes to maintaining or upgrading your 2000 Chevrolet S10, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2000 Chevrolet S10. With over 5 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $22.19. Plus, with over 290 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from
    $35.99

    (17)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    “Equivalent to oem”

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
    from
    $14.49

    (2)

    DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    “I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
    I pu”

    Popular Royal Purple 2000 Chevrolet S10 Drivetrains

    Royal Purple auto parts is one of the highest quality Drivetrain brands in the market. Any 2000 Chevrolet S10 owner should feel confident when installing genuine Royal Purple parts in their vehicle. To ensure the best fit and performance for your 2000 S10, Advance Auto Parts carries a full inventory of 2 Royal Purple Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Royal Purple Drivetrains range up to $12.99, plus, with more than 82 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
    from
    $12.99
    This product is not rated

    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

    “”

    FAQs for 2000 Chevrolet S10 Drivetrains

    Which Drivetrains are best-sellers for 2000 Chevrolet S10s?

    Out of 531 Drivetrains that fit 2000 Chevrolet S10s, the following parts are the top sellers:

    What’s the price range for 2000 Chevrolet S10 Drivetrains?

    Drivetrain prices for the 2000 Chevrolet S10 start at $1.99 and go up to $1,839.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 2000 Chevrolet S10?

    The average price for Drivetrains for the 2000 Chevrolet S10 is $192.06. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Chevrolet S10 model years?

    Yes, we currently carry Drivetrains for 21 model years of Chevrolet S10s between 1982 and 2003. Drivetrains are bought most frequently for the following model years: 2003, 2002, 2001, 1999, 1998, 1997, 1996, 1995, and 1994.

    What are the cheapest Drivetrains for my 2000 Chevrolet S10?

    The cheapest 2000 Chevrolet S10 Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 2000 Chevrolet S10?

    Out of 4,280 reviews by customers, our 2000 Chevrolet S10 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2000 Chevrolet S10 and their top-rated products:

    What types of Drivetrains do you sell for my 2000 Chevrolet S10?

    Can I get help with 2000 Chevrolet S10 Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.

    What is your return policy for Chevrolet S10 Drivetrains?

    Advance Auto Parts keeps returns simple. For new Chevrolet S10 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.