2000 Chevrolet K2500 Air Intakes

Essential 2000 Chevrolet K2500 Air Intakes

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98000 T)

Engine Intake Manifold Gasket Set

from

$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 93346)

Engine Intake Manifold Gasket Set

from

$22.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Conception propre aux applications pour garantir un ajustement parfait
  • Engineered and manufactured specifically for repair applications
  • Qualité inégalée à laquelle vous pouvez faire confiance
  • Validated for fit, form, and function
  • Comprend toutes les pièces nécessaires pour achever la réparation
  • Includes all parts needed to complete the repair
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1004)

Throttle Position Sensor

from

$44.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Throttle Position Sensor (Part No.ECA1598)

Throttle Position Sensor

from

$44.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Body Bolt With Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Body Bolt With Washer - M6-1.0 X 25mm (sold by each)

from

$1.29
These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:
  • Durable materials – manufactured to specific thread tolerance standards
  • Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
  • Multipurpose usefulness – can be used in a variety of applications, from auto to home
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Edelbrock – Performer Intake Manifold for 1987-95 Small-Block Chevy, Polished Finish (Part No.21041)

Performer Intake Manifold for 1987-95 Small-Block Chevy, Polished Finish

from

$627.99
Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

Weiand – Stealth; Intake Manifold (Part No.8150P)

Stealth; Intake Manifold

from

$371.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Edelbrock – Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L) (Part No.2111)

Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L)

from

$358.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Produces at Least 18 More Horsepower
  • Best Matched with Edelbrock 500cfm Carburetor
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1078)

Air Charge Temperature Sensor

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NTK – Air Charge Temperature Sensor (Part No.EF0008)

Air Charge Temperature Sensor

from

$25.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
  • NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
  • Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.
See More

aFe POWER – Throttle Body Spacer (Part No.46-34004)

Throttle Body Spacer

from

$139.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Precision Machined From T-6061 Billet Aluminum
  • Special Helix Design
  • Produces Increased HP/Torque/Throttle Response
  • Fits w/aFe Intakes
See More

aFe POWER – Throttle Body Spacer (Part No.46-34005)

Throttle Body Spacer

from

$139.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Precision Machined From T-6061 Billet Aluminum
  • Special Helix Design
  • Produces Increased HP/Torque/Throttle Response
  • Fits w/aFe Intakes
See More

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.12570168)

Fuel Injection Throttle Body Mounting Gasket

from

$7.79
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001292622ACD)

GM Original Equipment Fuel Injection Throttle Body Gasket

from

$11.32
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61178)

Fuel Injection Throttle Body Mounting Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

aFe POWER – Intake Coupling Kit (Part No.59-10732)

Intake Coupling Kit

from

$24.99
Soft Part Replacement Packages for existing air intake systems that end with 10732.

Product Features:
  • This Kit Will Only Fit aFe Items w/Skus Ending w/-10732
See More

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Nylon Nut - 1/4 In. (No.14)

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Push-Type Rocker And Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)

Push-Type Rocker And Fender Liner Retainer - 3/8 In. Hole

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Panel Trim Retainer – Interior – GM/Ford/Chrysler (Part No.45680)

Panel Trim Retainer - Interior - GM/Ford/Chrysler

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

2000 Chevrolet K2500 Air Intakes

You count on your 2000 Chevrolet K2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 33 Air Intakes ranging in price from $1.29 to $1,029.99, you’re sure to find everything you need for your 2000 Chevrolet K2500.

Brands matter. If you want to shop a specific Air Intakes brand, we stock 13 different brands like Felpro, Carquest Premium, and Dorman. 2000 Chevrolet K2500 Air Intakes start as low as $1.29!

One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 114 extensive product reviews on 2000 Chevrolet K2500 Air Intakes. Some of the top-rated Air Intakes products we carry are Engine Intake Manifold Gasket Set with 4.0 stars and Lower & Upper Intake Manifold Gasket Set: 26 Piece Set with 5.0 stars.

Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 2000 Chevrolet K2500 below to get started!

Top-Rated Air Intakes Brands For Your 2000 Chevrolet K2500

Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2000 Chevrolet K2500 running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Dorman, and even more.

Popular ACDelco Air Intakes

You’ll find popular ACDelco brand products across Throttle Bodies & Carb Parts. All are waiting to get your 2000 Chevrolet K2500 back on the road. Some of the top-rated ACDelco products in these categories are:
Throttle Position Sensor
from $59.99
(6)
Throttle Position Sensor
Throttle Position Sensors

FAQs for 2000 Chevrolet K2500 Air Intakes

What are the most purchased Air Intakes for the 2000 Chevrolet K2500?

Out of 33 Air Intakes for the 2000 Chevrolet K2500, the most popular in our inventory are:
Throttle Position Sensor
from $44.99
This product is not rated
Throttle Position Sensor
Throttle Position Sensors
Nylon Nut - 1/4 In. (No.14)
from $4.49
This product is not rated
Nylon Nut – 1/4 In. (No.14)
Engine Air Box Clips
Engine Intake Manifold Gasket Set
from $39.99
(7)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets

What are the top-rated 2000 Chevrolet K2500 Air Intakes?

Top-rated Air Intakes for your 2000 Chevrolet K2500 based on customer reviews/ratings are:
Engine Intake Manifold Gasket Set
from $82.99
(4)
Engine Intake Manifold Gasket Set
“I wish they made and upper and lower manifold gasket kit for this engine, But FELPRO wins again”
Lower & Upper Intake Manifold Gasket Set: 26 Piece Set
from $105.99
(2)
Lower & Upper Intake Manifold Gasket Set: 26 Piece Set
“No thermostat gasket,don’t forget silicone”
INTAKE MANIFOLD GASKET SET
from $25.99
(2)
INTAKE MANIFOLD GASKET SET
“Good”