1999 Toyota 4Runner Drivetrains

Essential 1999 Toyota 4Runner Drivetrains

Yukon Gear – Standard Open Carrier Case, Toyota 8" 4 Cylinder (Part No.20113)

Standard Open Carrier Case, Toyota 8" 4 Cylinder

from

$189.99
8″ standard Open case, bare.

Product Features:
  • Standard open carrier case
  • Fits Toyota 8″ with 4 cylinder engine
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Zip Locker Bulkhead Quick-Disconnect Fitting

from

$18.99
Product Features:
  • Bulkhead quit connect fitting
See More

Yukon Gear – Oil Baffle (Part No.33007)

Oil Baffle

from

$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:
  • Oil baffle
  • Fits Toyota Landcruiser reverse rotation front
See More

Yukon Gear – Pinion Install Kit For Early Toyota 8" Differential (Part No.13089)

Pinion Install Kit For Early Toyota 8" Differential

from

$234.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Toyota 8″ and 4 cylinder engine, 1986 and up with OEM ring and pinion set
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Outer Oil Slinger (Part No.33025)

Outer Oil Slinger

from

$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:
  • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
See More

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)

Yoke For Toyota V6 Rear With 29 Spline Pinion

from

$123.99
Product Features:
  • Fits Toyota V6 rear
  • Conversion yoke for 29 spline gears
  • 29 spline pinion
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55431)

Differential Carrier Gasket

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Transfer Case Switch (Part No.J7101699726DOR)

Transfer Case Switch

from

$85.91
The harsh conditions underneath your car can degrade exposed parts. However, Dorman’s Transfer Case Switch resists corrosion and water intrusion, meaning that your Four-Wheel Drive smoothly and consistently engages.

Product Features:
  • Direct replacement for a proper fit every time
  • Easy to install
  • Weather-resistant for long-lasting use
  • Quality tested to ensure durability
See More

Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)

Toyota 8" & V6 Pinion Nut Washer

from

$16.99
Toyota 8″ & V6 pinion nut washer.

Product Features:
  • Pinion nut for Toyota 8″ and V6
See More

Yukon Gear – RngPnnKt (Part No.24677)

RngPnnKt

from

$468.99
RngPnnKt

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R11RMKT)

Differential Master Bearing Kit - Timken

from

$180.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • TOYOTA 8″ BEARING & SEAL MASTER KIT TIMKEN
See More

Dorman – Differential 4WD Actuator Housing (Part No.600-996)

Differential 4WD Actuator Housing

from

$87.99
This 4WD axle actuator housing directly replaces the original equipment housing on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – matches the fit and function of the original housing on specific vehicle applications
  • Effective fix – installation restores performance affected by failed original actuator housing
  • Smart solution – allows replacement of only housing without needing to replace entire transfer case
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

National – Bearings (Part No.32307)

Bearings

from

$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

NOK – Pinion Seal (Part No.J7010163834NOK)

Pinion Seal

from

$11.65
Pinion Seal

Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

Pinion Seal For Toyota 7.5", 8", V6 & T100

from

$19.99
Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential
See More

Dorman – Differential Vent Breather (Part No.924-284)

Differential Vent Breather

from

$6.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010411865EMP)

RE CV Joint Boot Kit

from

$31.54
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Motive Gear – Differential Gear Install Kit (Part No.TOYV6IK)

Differential Gear Install Kit

from

$42.99


Product Features:
  • TOYOTA 8″ V6&4CLY TURBO
See More

Yukon Gear – Small Hole Yoke For ’82 And Older Toyota T100 And Tacoma (With Locker) With 27 Spline Pinion (Part No.41107)

Small Hole Yoke For '82 And Older Toyota T100 And Tacoma (With Locker) With 27 Spline Pinion

from

$276.99
Yukon small hole yoke for ’82 and older Toyota T100 and Tacoma (with locker) with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota Tacoma and T100 with factory locking differential
  • 27 spline
See More

Yukon Gear – Spindle Nut Kit For Toyota Front (Part No.33513)

Spindle Nut Kit For Toyota Front

from

$24.99
Product Features:
  • Spindle nut kit for Toyota front
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota In A Ratio (Part No.24652)

High Performance Ring & Pinion Gear Set For Toyota In A Ratio

from

$424.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Toyota V6 rear
  • 5.29 ratio
  • 29 spline pinion
  • Includes conversion yoke, seal, and pinion nut
See More

National – Bearings (Part No.30306)

Bearings

from

$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate

from

$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:
  • Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
  • 5 needed
See More

Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)

Split CV Boot - With Quick Drying Adhesive

from

$42.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Popular 1999 Toyota 4Runner Drivetrains Categories

1999 Toyota 4Runner Drivetrains

You count on your 1999 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 190 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 1999 Toyota 4Runner.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Valvoline, Dorman, and Moog. 1999 Toyota 4Runner Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,466 extensive product reviews on 1999 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter with 3.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1999 Toyota 4Runner below to get started!

Top-Rated Drivetrains Brands For Your 1999 Toyota 4Runner

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, Dorman, Moog, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1999 Toyota 4Runner back on the road. Some of the top-rated Felpro products in these categories are:
Differential Carrier Gasket
from $8.79
(1)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

FAQs for 1999 Toyota 4Runner Drivetrains

What are the most purchased Drivetrains for the 1999 Toyota 4Runner?

Out of 190 Drivetrains for the 1999 Toyota 4Runner, the most popular in our inventory are:
CV Axle Shaft Assembly
from $131.99
(15)
CV Axle Shaft Assembly
Drive Shaft and Axles
Greaseable Premium Universal Joint
from $25.99
(10)
Greaseable Premium Universal Joint
U-Joints
Split CV Boot - With Quick Drying Adhesive
from $42.99
This product is not rated
Split CV Boot – With Quick Drying Adhesive
OE CV Boot Kits

What are the top-rated 1999 Toyota 4Runner Drivetrains?

Top-rated Drivetrains for your 1999 Toyota 4Runner based on customer reviews/ratings are:
C.V. Joint Solvent Welded Split Boot Kit Outer
from $21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
from $32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter
from $29.99
(8)
Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter
“Worked great. Direct fit.”