1999 Subaru Legacy Drivetrains

Essential Drivetrains for 1999 Subaru Legacies

National – Multi Purpose Seal (Part No.223050)

Multi Purpose Seal

from

$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-7075)

Drive Shaft: Not Greasable, Direct Replacement

from

$544.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Engine Oil Drain Plug (Part No.A61101669326DOR)

Engine Oil Drain Plug

from

$4.90
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:
  • Direct replacement for a proper fit every time
  • Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
  • Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
  • Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
See More

EMPI – Axle Shaft Nut (Part No.K403059357EMP)

Axle Shaft Nut

from

$5.11
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

National – Bearings (Part No.32007)

Bearings

from

$70.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

SKF – Differential Pinion Bearing (Part No.J7020259642SKF)

Differential Pinion Bearing

from

$102.80
Differential Pinion Bearing

EMPI – RE CV Joint Boot Kit (Part No.K6010182643EMP)

RE CV Joint Boot Kit

from

$25.61
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

National – Axle Diff. Seal (Part No.711092)

Axle Diff. Seal

from

$11.99
Axle Diff. Seal

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

Clamp - CV Boot

from

$5.61
Clamp – CV Boot

USA Industries – Constant Velocity Axle Assembly (Part No.AX-2711)

Constant Velocity Axle Assembly

from

$51.99
Precision-machined components reduce noise and provide maximum torque to the wheels.
See More

FAG US – TAPERED ROLLER BEARI (Part No.30208A)

TAPERED ROLLER BEARI

from

$53.99
TAPERED ROLLER BEARI

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Type TLS-LV Automatic Transmission Fluid - 1 qt

from

$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Exceptional wear protection of gears and bearings
  • Provides superior deposit control and protects metal surfaces from rust and corrosion
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.10114-042B)

Type TLS-LV Automatic Transmission Fluid - 1 qt

from

$12.79
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Exceptional wear protection of gears and bearings
  • Provides superior deposit control and protects metal surfaces from rust and corrosion
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2941)

Cu Boot Kit

from

$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

EMPI – CV Joint Boot Kit (Part No.K6010182703EMP)

CV Joint Boot Kit

from

$31.88
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Whiteline – Differential Mount Support Outrigger Bushing (Part No.KDT905)

Differential Mount Support Outrigger Bushing

from

$63.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Differential Mount Support Outrigger Bushing (Part No.W91379)

Differential Mount Support Outrigger Bushing

from

$103.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Driveworks – Oil Seal (Part No.S-225010)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-160)

Spindle Nut M22-1.5 Hex Size 32mm (sold by each)

from

$5.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (Part No.615-160.1)

Spindle Nut M22-1.5 Hex Size 32mm

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut (Part No.05134)

Spindle Nut

from

$12.29
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$53.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 1999 Subaru Legacy with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1999 Subaru Legacy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Drivetrains are key to keeping your Legacy functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Drivetrains for the 1999 Subaru Legacy, designed to meet your needs without breaking the bank. From CV Axles and Joint replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1999 Subaru Legacy at great prices. Our Drivetrains inventory for this model ranges from just $2.27 to $698.99, with an average price of $70.12. Our 50 Drivetrains in stock come from 16 trusted brands, so you’re sure to find the right part for your 1999 Subaru Legacy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Subaru Legacy, we stock popular OEM and aftermarket Drivetrains from top names like Dorman, Carquest Premium, National, and more. Dorman Drivetrains start at just $4.90 and boast an impressive 4 stars average rating from customers. Carquest Premium and National also bring quality to the table, with Drivetrains available starting at $13.79, and at an average 4 stars rating. With 307 customer reviews and counting, our 1999 Subaru Legacy Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Subaru Legacy is always ready to roll. We’re committed to providing you with everything you need to keep your Legacy in top shape, all in one place. Start shopping confidently below for your 1999 Subaru Legacy!

Best-Selling CV Axles and Joints for 1999 Subaru Legacies

Enhance the driving experience in your Subaru with 14 quality CV Axles and Joint components, starting at $2.27.

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2595)

Cu Joint Boot Kit

from

$24.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2824)

Cu Joint Boot Kit

from

$23.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)

Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter

from

$35.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)

Universal C.V. Joint Boot Kit Front Outer

from

$23.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2502)

Cu Joint Boot Kit

from

$28.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)

Split CV Boot - With Quick Drying Adhesive

from

$42.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010181536EMP)

RE CV Joint Boot Kit

from

$25.20
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010181548EMP)

RE CV Joint Boot Kit

from

$29.59
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182652EMP)

RE CV Joint Boot Kit

from

$25.35
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2590)

Cu Joint Boot Kit

from

$24.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

Clamp - CV Boot

from

$5.61
Clamp – CV Boot

EMPI – Clamp – CV Boot (Part No.4I25091157EMP)

Clamp - CV Boot

from

$2.39
Clamp – CV Boot

EMPI – Clamp – CV Boot (Part No.4I25091156EMP)

Clamp - CV Boot

from

$2.27
Clamp – CV Boot

Most Popular 1999 Subaru Legacy Drive Shafts and Axles

Customize your Subaru with 16 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Axle Shaft Universal Joints, all priced under $698.99.

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66037)

CV Axle Shaft Assembly

from

$118.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66903)

CV Axle Shaft Assembly

from

$99.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

USA Industries – Constant Velocity Axle Assembly (Part No.AX-2711)

Constant Velocity Axle Assembly

from

$51.99
Precision-machined components reduce noise and provide maximum torque to the wheels.
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66501HP)

CV Axle Shaft Assembly

from

$178.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Oil Seal (Part No.S-225010)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Rear Drive Shaft: OE Fix (Part No.936-900)

Rear Drive Shaft: OE Fix

from

$567.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly.
  • Rear Drive Shaft: OE Fix.
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$53.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66904)

CV Axle Shaft Assembly

from

$101.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembl

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Spicer – Universal Joint (Part No.5-443X)

Universal Joint

from

$26.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
See More

Dorman – Rear Drive Shaft: Greaseable (Part No.936-904)

Rear Drive Shaft: Greaseable

from

$698.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, OE Fix (Part No.936-906)

Rear Drive Shaft: Greaseable, OE Fix

from

$663.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly.
  • Rear Drive Shaft: Greaseable, OE Fix.
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-7039)

Drive Shaft: Not Greasable, Direct Replacement

from

$637.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Autopart International Inc – Axle Assembly (Part No.K40002020699API)

Axle Assembly

from

$121.64
Axle Assembly

Dorman – Spindle Nut (Part No.K1002831724DOR)

Spindle Nut

from

$13.67
Spindle Nut

EMPI – Axle Shaft Nut (Part No.K403059357EMP)

Axle Shaft Nut

from

$5.11
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Top Picks for 1999 Subaru Legacy Differentials

Upgrade Subaru Legacies with top-quality Differentials parts, including 14 OEM and aftermarket selections for your 1999 model.

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Driveworks – Differential Seal (Part No.S-223255)

Differential Seal

from

$7.49
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.32305)

Bearings

from

$42.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Axle Diff. Seal (Part No.711090)

Axle Diff. Seal

from

$14.29
Axle Diff. Seal

National – Axle Diff. Seal (Part No.711091)

Axle Diff. Seal

from

$13.79
Axle Diff. Seal

Dorman – Engine Oil Drain Plug (Part No.A61101669326DOR)

Engine Oil Drain Plug

from

$4.90
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:
  • Direct replacement for a proper fit every time
  • Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
  • Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
  • Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
See More

Whiteline – Differential Mount In Cradle Bushing (Part No.W91380)

Differential Mount In Cradle Bushing

from

$114.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Differential Mount Support Outrigger Bushing (Part No.W91379)

Differential Mount Support Outrigger Bushing

from

$103.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

SKF – Differential Pinion Bearing (Part No.J7020259642SKF)

Differential Pinion Bearing

from

$102.80
Differential Pinion Bearing

FAG US – TAPERED ROLLER BEARI (Part No.30208A)

TAPERED ROLLER BEARI

from

$53.99
TAPERED ROLLER BEARI

National – Bearings (Part No.32306)

Bearings

from

$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Whiteline – Differential Mount In Cradle Bushing (Part No.KDT927)

Differential Mount In Cradle Bushing

from

$39.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Inserts are designed to work with the original factory bushing rather than replacing it.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

NOK – Differential Seal (Part No.J704084573NOK)

Differential Seal

from

$12.14
Differential Seal

In-Demand Transfer Cases for 1999 Subaru Legacies

Select from 3 premium Transfer Cases parts for your 1999 Subaru Legacy, with prices ranging from $12.62 to $70.99.

National – Multi Purpose Seal (Part No.223050)

Multi Purpose Seal

from

$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.32007)

Bearings

from

$70.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

SKF – Input Shaft Seal (Part No.J1156259660SKF)

Input Shaft Seal

from

$12.62
Input Shaft Seal

Most Sold 1999 Subaru Legacy Spindles

Explore our best-selling Subaru parts for the 1999 Legacy among 3 OEM and aftermarket options starting from $5.99.

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-160)

Spindle Nut M22-1.5 Hex Size 32mm (sold by each)

from

$5.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut (Part No.05134)

Spindle Nut

from

$12.29
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (Part No.615-160.1)

Spindle Nut M22-1.5 Hex Size 32mm

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Top-Rated Drivetrains Brands For Your 1999 Subaru Legacy

Shop for the best-rated brands offering Drivetrains and other products for your 1999 Subaru Legacies. Below you’ll find some of our best rated Drivetrains from Dorman, Carquest Premium, and National, and more. Drivetrains from these brands that fit a 1999 Legacy start at just $4.90 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1999 Subaru Legacy Drivetrains

When it comes to maintaining or upgrading your 1999 Subaru Legacy, using quality Drivetrains is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Drivetrains, specifically designed for the 1999 Subaru Legacy. With over 13 Dorman brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.90, with an average price of just $166.25. Plus, with over 54 customer reviews and an average rating of 4 stars, you can trust that our Dorman Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Spindle Nut M22-1.5 Hex Size 32mm (sold by each)
from
$5.99
This product is not rated

Spindle Nut M22-1.5 Hex Size 32mm (sold by each)

“”

Rear Drive Shaft: OE Fix
from
$567.99
This product is not rated

Rear Drive Shaft: OE Fix

“”

Split CV Boot - With Quick Drying Adhesive
from
$42.99
This product is not rated

Split CV Boot – With Quick Drying Adhesive

“”

Popular Carquest Premium 1999 Subaru Legacy Drivetrains

Carquest Premium auto parts is one of the highest quality Drivetrain brands in the market. Any 1999 Subaru Legacy owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1999 Legacy, Advance Auto Parts carries a full inventory of 4 Carquest Premium Drivetrains. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Carquest Premium Drivetrains range from $99.99 to $178.99, plus, with more than 44 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

CV Axle Shaft Assembly
from
$178.99
This product is not rated

CV Axle Shaft Assembly

“”

CV Axle Shaft Assembly
from
$101.99
This product is not rated

CV Axle Shaft Assembly

“”

CV Axle Shaft Assembly
from
$118.99

(35)

CV Axle Shaft Assembly

“Part fit great and was exactly what I needed to fix the problem!”

FAQs for 1999 Subaru Legacy Drivetrains

Which Drivetrains are best-sellers for 1999 Subaru Legacies?

Out of 50 Drivetrains that fit 1999 Subaru Legacies, the following parts are the top sellers:

What’s the price range for 1999 Subaru Legacy Drivetrains?

Drivetrain prices for the 1999 Subaru Legacy start at $2.27 and go up to $698.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1999 Subaru Legacy?

The average price for Drivetrains for the 1999 Subaru Legacy is $70.12. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Subaru Legacy model years?

Yes, we currently carry Drivetrains for 34 model years of Subaru Legacies between 1990 and 2024. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 1999 Subaru Legacy?

The cheapest 1999 Subaru Legacy Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 1999 Subaru Legacy?

Out of 307 reviews by customers, our 1999 Subaru Legacy Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1999 Subaru Legacy and their top-rated products:

What types of Drivetrains do you sell for my 1999 Subaru Legacy?

Can I get help with 1999 Subaru Legacy Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Drivetrains and more.

What is your return policy for Subaru Legacy Drivetrains?

Advance Auto Parts keeps returns simple. For new Subaru Legacy Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.