from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$30.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$2.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.61

Fuel Injector O-Ring

from

$168.99

CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$23.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$58.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$51.22

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$121.99

Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$53.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$14.10

The Motorcraft seals and gaskets, combines quality materials and design excellence that promote product integrity and customer satisfaction

Product Features:

Original Equipment Quality
Stands up to grease, oil, dirt and high temperatures

from

$25.99

Exhaust Gas Recirculation (EGR) Pressure Feedback Hose

from

$69.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$153.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$85.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$17.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$66.99

This exhaust gas recirculation (EGR) line is designed to match the fit of an original EGR line on specified vehicles. It is engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.

Product Features:

Direct replacement – this exhaust gas recirculation line is designed to match the fit and function of the original equipment EGR line
Ideal solution – engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$79.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our fuel pressure regulators are application specific for the perfect fit and form
A robust engineering design for greater resistance to leakage
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$74.30

Motorcraft electric fuel Injectors are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:

Same fuel Injectors installed during vehicle production
Latest engineering enhancements are incorporated
Hot fuel handling capabilities translate into consistent performance
Before they are shipped, fuel Injectors are 100-percent flow-tested
Units come as complete assemblies for easier, faster installation

from

$36.99

New Platinum Pro Fuel Tank Straps

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

CARQUEST gradient density fuel pump strainers deliver reliable filtration and are the first line of defense against fuel system contaminants.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$30.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$45.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.