1999 Ford F-450 Super Duty Drivetrains
More 1999 Ford F-450 Super Duty Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1999 Ford F-450 Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1999 Ford F-450 Super Duty Drivetrains
Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)
Motive Gear – Differential Ring and Pinion (Part No.F10.5-410PK)
USA Standard Gear – Master Overhaul Kit For Dana "Super" 60 Front (Part No.37097)
from
$425.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer ‘super’ 60
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
Yukon Gear – Finned Aluminum Cover For Dana 80 (Part No.32337)
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles (Part No.16085)
from
$301.99
Yukon standard open spider gear replacement kit for Dana 60 and 61 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Dana Spicer 60 open differential with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Spicer – Axle Shft Univ Joint (Part No.SPL55-4X)
from
$102.99
Axle Shft Univ Joint
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)
from
$182.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Includes carrier bearings and races and carrier shim kit
USA Standard Gear – TCaseShiftForkInsert (Part No.70666)
from
$11.99
TCaseShiftForkInsert
USA Standard Gear – Bearing Kit For Dana 60 Front (Part No.58041)
from
$289.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Dorman – Differential Clutch Kit (Part No.697-417)
from
$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
- Quality materials – all components are built for reliable longevity and performance
- Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
- Trustworthy quality – backed by team of designers and engineers in the United States
Dorman – 4WD Differential Switch (Part No.600-402)
from
$73.99
This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications
- Effective fix – restores control of 4WD system impacted by failed original solenoid
- Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
- Trustworthy quality – backed by team of designers and engineers in the United States
MOOG Driveline Products – Universal Joint Strap Kit (Part No.351-10)
from
$14.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 351 & 358
- Contains two 2.12″ bolt center clamps and four 3/8-24 x 3/4″ cap screws
Motive Gear – Differential Pinion Shim Kit (Part No.1111)
Yukon Gear – Differential (Part No.26045)
from
$1168.99
Differential
Milemarker – Hub Conversion Kit (Part No.95-32721)
Cardone – Transfer Case Motor (Part No.48-205)
from
$158.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
Yukon Gear – Replacement Complete Shim Kit For Dana 80 (Part No.55028)
from
$126.99
Product Features:
See More
- Complete shim kit for Dana Spicer 80
- 4.375″ O.D. pinion bearing application only
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)
from
$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Carquest Premium – 4WD Switch (Part No.FWC1025)
from
$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Yukon Gear – S135 Ring Gear Bolt & Nut Kit (Set Of 16 Bolts) (Part No.33041)
from
$135.99
S135 ring gear bolt & nut kit (set of 16 bolts).
Product Features:
See More
Product Features:
- Ring gear bolt and nut kit
- Fits Dana Spicer S135
- Includes 12 bolts and nuts
Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)
from
$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 80
- 9/16″ x 18 thread
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.NP673386)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Popular 1999 Ford F-450 Super Duty Drivetrains Categories
1999 Ford F-450 Super Duty Drivetrains
You count on your 1999 Ford F-450 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 294 Drivetrains ranging in price from $2.99 to $1,912.99, you’re sure to find everything you need for your 1999 Ford F-450 Super Duty.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Moog, DriveWorks, and National. 1999 Ford F-450 Super Duty Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 640 extensive product reviews on 1999 Ford F-450 Super Duty Drivetrains. Some of the top-rated Drivetrains products we carry are MileMarker Supreme; Manual Hub with 4.1 stars and Multi Purpose Bearing with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1999 Ford F-450 Super Duty below to get started!
Top-Rated Drivetrains Brands For Your 1999 Ford F-450 Super Duty
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Ford F-450 Super Duty running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, National, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1999 Ford F-450 Super Duty back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1999 Ford F-450 Super Duty, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1999 Ford F-450 Super Duty Drivetrains
What are the most purchased Drivetrains for the 1999 Ford F-450 Super Duty?
Out of 294 Drivetrains for the 1999 Ford F-450 Super Duty, the most popular in our inventory are:
What are the top-rated 1999 Ford F-450 Super Duty Drivetrains?
Top-rated Drivetrains for your 1999 Ford F-450 Super Duty based on customer reviews/ratings are:
from
$428.99
(36)
MileMarker Supreme; Manual Hub
“if you follow the directions, this install will go smooth. i used some blue loctite on the allen screws to prevent them from backing out. this took me”
