1999 Ford F-350 Super Duty Hubs and Hub Assemblies

Essential 1999 Ford F-350 Super Duty Hubs and Hub Assemblies

FEQ – Wheel Hub Assembly (Part No.K7001331037FEQ)

Wheel Hub Assembly

from

$119.24
FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:
  • Integrated sensors and electronics for reliable function
  • Factory sealed assembly eliminates contamination
  • No need for pre-load adjustment at assembly
  • Compact and lightweight
  • Minimizes axial space requirements
See More

FEQ – Wheel Hub Assembly (Part No.K7001331038FEQ)

Wheel Hub Assembly

from

$115.83
FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:
  • Integrated sensors and electronics for reliable function
  • Factory sealed assembly eliminates contamination
  • No need for pre-load adjustment at assembly
  • Compact and lightweight
  • Minimizes axial space requirements
See More

Motorcraft – Wheel Hub Assembly (Part No.K7001413077MTR)

Wheel Hub Assembly

from

$485.48
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:
  • Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
  • Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
  • Special bearing seals to help keep out contaminants, the number one cause of bearing failure
  • Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
  • Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
  • Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
  • Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
  • Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
  • Integral bearing races specifically designed to each application, no one-size-fits-all solution
  • Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
  • Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
  • Original equipment specifications minimize any possibility of the hub cracking
  • Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
  • Tapered roller bearings for high load rates when specified
See More

Motorcraft – Wheel Hub Assembly (Part No.K7001398376MTR)

Wheel Hub Assembly

from

$549.32
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:
  • Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
  • Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
  • Special bearing seals to help keep out contaminants, the number one cause of bearing failure
  • Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
  • Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
  • Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
  • Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
  • Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
  • Integral bearing races specifically designed to each application, no one-size-fits-all solution
  • Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
  • Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
  • Original equipment specifications minimize any possibility of the hub cracking
  • Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
  • Tapered roller bearings for high load rates when specified
See More

Yukon Gear – Hardcore Locking Hub Set For Dana 60, 35 Spline – ’99-’04 Ford (Part No.29083)

Hardcore Locking Hub Set For Dana 60, 35 Spline - '99-'04 Ford

from

$679.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.

Product Features:
  • Fits 1999-2004 Ford Super Duty
  • 35 spline
  • All steel construction
  • Chromoly internals for added strength
  • Low profile bezel to reduce impact with obstacles
  • Defaults to locked position
  • 1/3 turn from disengaged to engaged
See More

Dorman – Help – 4Wd Hub O-Ring Kit (Part No.81060)

4Wd Hub O-Ring Kit

from

$16.29
This locking hub service kit gives you all the necessary components for a complete and convenient locking hub repair for specific vehicle years, makes and models.

Product Features:
  • Complete kit – this locking hub service kit includes all seals and retainers necessary for a proper hub repair
  • Thoroughly tested – components have undergone rigorous material testing and inspection to ensure reliability
  • Smart solution – allows you to restore 4WD operation after original locking hub fails
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – 4WD Front Hub Seal Kit (Part No.600-207)

4WD Front Hub Seal Kit

from

$87.99
This locking hub seal kit includes the seals required to help protect the hub’s internal components from moisture and contaminants on specified vehicle makes, years and models when the hub is malfunctioning or has failed due to moisture infiltration.

Product Features:
  • Direct replacement – this locking hub seal kit includes seals designed to match the fit and function of the original equipment required to help ensure the hub is watertight on specified vehicles
  • Ideal solution – engineered to help protect the locking hub by preventing moisture and contaminant infiltration when the original seals are leaking or missing
  • Durable construction – the components in this kit are made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Hardcore Locking Hub Set For Dana 60, 30 Spline – ’99-’04 Ford, 1 Side Only (Part No.29092)

Hardcore Locking Hub Set For Dana 60, 30 Spline - '99-'04 Ford, 1 Side Only

from

$379.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only.

Product Features:
  • Fits 1999-2004 Ford Super Duty
  • 30 spline
  • All steel construction
  • Chromoly internals for added strength
  • Low profile bezel to reduce impact with obstacles
  • Defaults to locked position
  • 1/3 turn from disengaged to engaged
See More

Milemarker – Locking Hub Replacement Parts (Part No.449SK)

Locking Hub Replacement Parts

from

$36.99
For Mopar transfer case 203 N.P. pn(602). 4 x 2 conversion kit service part.

Product Features:
  • 4 x 2 Conversion Kit Service Part; Manual Hubs
See More

Yukon Gear – Hardcore Locking Hub Set For Dana 60, 30 Spline – ’99-’04 Ford (Part No.29085)

Hardcore Locking Hub Set For Dana 60, 30 Spline - '99-'04 Ford

from

$679.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.

Product Features:
  • Fits 1999-2004 Ford Super Duty
  • 30 spline
  • All steel construction
  • Chromoly internals for added strength
  • Low profile bezel to reduce impact with obstacles
  • Defaults to locked position
  • 1/3 turn from disengaged to engaged
See More

Dorman – Front Locking Hub Service Seal Kit (Part No.600-249)

Front Locking Hub Service Seal Kit

from

$51.99
This locking hub service kit gives you all the necessary components for a complete and convenient locking hub repair for specific vehicle years, makes and models.

Product Features:
  • Complete kit – this locking hub service kit includes all seals and retainers necessary for a proper hub repair
  • Thoroughly tested – components have undergone rigorous material testing and inspection to ensure reliability
  • Smart solution – allows you to restore 4WD operation after original locking hub fails
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

1999 Ford F-350 Super Duty Hubs and Hub Assemblies

Maybe you’re in the middle of a full rebuild of that 1999 Ford F-350 Super Duty. Maybe you just need a couple of Hubs and Hub Assemblies. Either way, Advance Auto Parts has 7 different Hubs and Hub Assemblies in our inventory ranging from $16.29 to $679.99. That means you can find the exact parts or products you need to keep that 1999 Ford F-350 Super Duty running smoothly.

Hubs and Hub Assemblies are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Ford F-350 Super Duty. Dorman, Milemarker, and FEQ are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Hubs and Hub Assemblies for your 1999 Ford F-350 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Hubs and Hub Assemblies to keep your 1999 Ford F-350 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Hubs and Hub Assemblies Brands To Make Your 1999 Ford F-350 Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Ford F-350 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Hubs and Hub Assemblies make up Advance Auto Parts’ inventory, and all are ready to help make your F-350 Super Duty the best it can be. Be sure to browse some of our top Hubs and Hub Assemblies brands and parts.

Popular Dorman – Help Hubs and Hub Assemblies

We carry Dorman – Help parts in our stock across Axle Hub O-Rings and Wheel Hub Seal Kits categories, plus more. For a 1999 Ford F-350 Super Duty, our most popular Dorman – Help Hubs and Hub Assemblies include:
4Wd Hub O-Ring Kit
from $16.29
(4)
4Wd Hub O-Ring Kit
Axle Hub O-Rings
4WD Front Hub Seal Kit
from $87.99
(2)
4WD Front Hub Seal Kit
Wheel Hub Seal Kits

FAQs for 1999 Ford F-350 Super Duty Hubs and Hub Assemblies

What are the most purchased Hubs and Hub Assemblies for the 1999 Ford F-350 Super Duty?

Out of 7 Hubs and Hub Assemblies for the 1999 Ford F-350 Super Duty, the most popular in our inventory are:
Locking Hub Replacement Parts
from $36.99
(1)
Locking Hub Replacement Parts
Locking Hub Service Kits
Hardcore Locking Hub Set For Dana 60, 30 Spline - '99-'04 Ford
from $679.99
This product is not rated
Hardcore Locking Hub Set For Dana 60, 30 Spline – ’99-’04 Ford
Locking Hub Service Kits
Wheel Hub Assembly
from $119.24
This product is not rated
Wheel Hub Assembly
Axle Hubs