1999 Ford Explorer Performance Ignition Products
More 1999 Ford Explorer Performance Ignition Products
Find your specific 1999 Ford Explorer original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1999 Ford Explorer Performance Ignition Products
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)
from
$117.99
Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.
Product Features:
See More
Product Features:
- Designed to use w/late model Ford waste spark ignition systems
- 83:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Secondary towers designed for snap on spark plug terminals
- Primary terminals require Ford style connector
MSD Ignition – Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack (Part No.82428)
from
$259.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 1999-2004 4.6L/5.4L SOHC 2V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
MSD Ignition – Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils – Red (Part No.82438)
from
$370.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 2005-2009 4.6L/5.4L SOHC 3V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- CARB approved legal for use in all states
- Comes in an package of 8
Popular 1999 Ford Explorer Performance Ignition Products Categories
1999 Ford Explorer Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1999 Ford Explorer. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 3 different Performance Ignition Products in our inventory ranging from $30.49 to $117.99. That means you can find the exact parts or products you need to keep that 1999 Ford Explorer running smoothly.
Performance Ignition Products are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Ford Explorer. MSD Ignition and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1999 Ford Explorer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1999 Ford Explorer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1999 Ford Explorer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Ford Explorer demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Explorer the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular MSD Ignition Performance Ignition Products
We carry MSD Ignition parts in our stock across Performance Coils categories, plus more. For a 1999 Ford Explorer, our most popular MSD Ignition Performance Ignition Products include:
Top 1999 Ford Explorer Performance Ignition Products from Mallory
Mallory products are another trusted brand when it comes to Performance Ignition Products for your 1999 Ford Explorer. Popular Mallory parts include:
