1999 Ford Explorer Drivetrains

Essential 1999 Ford Explorer Drivetrains

Yukon Gear – 8.8" Ford 7/8" Diameter Notched Cross Pin Shaft (.875" For ’86 And Newer) (Part No.33434)

8.8" Ford 7/8" Diameter Notched Cross Pin Shaft (.875" For '86 And Newer)

from

$57.99
8.8″ Ford 7/8″ diameter Notched cross pin shaft (.875″ for ’86 and newer). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:
  • Notched cross pin shaft for Ford 8.8″
  • 0.875″ diameter
  • Not compatible with Spartan Locker or Powertrax Lock Right
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-555)

Differential Pinion Yoke Assembly

from

$79.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:
  • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
  • Effective fix – replacement restores proper connection between drive shaft and differential
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802011)

Tapered Roller Bearing

from

$10.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Dorman – Rear Differential Cover (Part No.697-702)

Rear Differential Cover

from

$34.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99181)

Shaft Repair Sleeve

from

$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

from

$6.99
Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.750″ diameter cross pin shaft applications only
See More

Dorman – Transfer Case Shift Motor (Part No.600-924)

Transfer Case Shift Motor

from

$203.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:
  • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
  • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
  • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
  • Quality assured – vehicle-specific application has been validation tested to ensure quality
See More

Dorman – Rear Axle Shaft, Right (Part No.630-231)

Rear Axle Shaft, Right

from

$207.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.466)

Greaseable Super Strength Universal Joint

from

$31.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Royal Purple – Max Automatic Transmission Fluid (1 Quart) (Part No.01320)

Max Automatic Transmission Fluid (1 Quart)

from

$19.49
Max ATF is a synthetic, high-performance, automatic transmission fluid. Its low co-efficient of friction and high film strength help to dramatically reduce heat and wear. Additionally, Max ATF is more oxidation stable than other transmission fluids for longer fluid life. Max ATF significantly reduces heat to extend the life of your transmission.

Product Features:
  • High performance automatic transmission fluid
  • High film strength helps to dramatically reduce heat and wear
  • Fully compatible and can be mixed with other automatic transmission fluids
  • Extends the life of your transmission
See More

Motorcraft – Axle Assembly (Part No.K40003257252MTR)

Axle Assembly

from

$347.97
Axle Assembly

EMPI – RE CV Joint Boot Kit (Part No.K6010182734EMP)

RE CV Joint Boot Kit

from

$28.96
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Dorman – Transfer Case Gasket (Part No.J71331098749DOR)

Transfer Case Gasket

from

$12.14
Transfer Case Gasket

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Yukon Gear – Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-’86 9" Ford (Part No.30037)

Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-'86 9" Ford

from

$8.99
Pinion seal for 7.5″, 8.8″, and 9.75″ Ford, and also 1985-’86 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Ford 7.5″, 8.8″ and some 9.75″
  • 2.785″ O.D.
See More

Driveworks – Wheel Seal (Part No.S-710429)

Wheel Seal

from

$11.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Minor Install Kit For Model 35 IFS Differential For Ranger And Explorer (Part No.12068)

Minor Install Kit For Model 35 IFS Differential For Ranger And Explorer

from

$175.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. Includes side seals. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits AMC Model 35 IFS
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)

Standard Spider Gear Set For Ford 8.8", 31 Spline

from

$209.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 31 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Mr. Gasket – Differential Gasket (Part No.142)

Differential Gasket

from

$20.49
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Bearing Race Driver (Part No.56022)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M86610 race
  • All steel construction
See More

SKF – Axle Shaft Seal (Part No.K4021196703SKF)

Axle Shaft Seal

from

$24.43
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Yukon Gear – Set Up Bearing (Part No.56042)

Set Up Bearing

from

$153.99
Set-up bearing (one bearing.) HM88648. No return.

Product Features:
  • Set up bearing
  • Fits HM88648 pinion bearing
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Clutch Pack (Part No.F8.8CPK)

Differential Clutch Pack

from

$123.99


Product Features:
  • CLUTCH PACK KIT 8.8″ FORD 1 KIT PER UNIT
See More

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)

from

$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

from

$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Popular 1999 Ford Explorer Drivetrains Categories

1999 Ford Explorer Drivetrains

You count on your 1999 Ford Explorer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 373 Drivetrains ranging in price from $0.99 to $2,199.99, you’re sure to find everything you need for your 1999 Ford Explorer.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 33 different brands like Moog, Valvoline, and National. 1999 Ford Explorer Drivetrains start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 8,012 extensive product reviews on 1999 Ford Explorer Drivetrains. Some of the top-rated Drivetrains products we carry are C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Universal Joint with 4.4 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1999 Ford Explorer below to get started!

Top-Rated Drivetrains Brands For Your 1999 Ford Explorer

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Ford Explorer running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, National, and even more.

Popular EVO Driveline Drivetrains

You’ll find popular EVO Driveline brand products across Transfer Cases. All are waiting to get your 1999 Ford Explorer back on the road. Some of the top-rated EVO Driveline products in these categories are:
Transfer Case Assembly
from $1086.99
(5)
Transfer Case Assembly
Transfer Case Assemblies

FAQs for 1999 Ford Explorer Drivetrains

What are the most purchased Drivetrains for the 1999 Ford Explorer?

Out of 373 Drivetrains for the 1999 Ford Explorer, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $25.99
(143)
Greaseable Premium Universal Joint
U-Joints
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Housing Cover Gaskets

What are the top-rated 1999 Ford Explorer Drivetrains?

Top-rated Drivetrains for your 1999 Ford Explorer based on customer reviews/ratings are:
C.V. Joint Solvent Welded Split Boot Kit Outer
from $21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”
Bearings
from $16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”