1999 Ford E-250 Econoline Engine Parts

Below you will find various in-demand Ford Engine Parts, components and accessories for your 1999 E-250 Econoline. Advance Auto Parts has popular E-250 Econoline parts like Engine Mounts, Engine Gaskets and Seals, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other E-250 Econoline model years including 1997, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2006 and more. Select a category of 1999 Ford E-250 Econoline Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1999 Ford E-250 Econoline Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Cylinder Head Temperature Sensors

Gasket Kit Sets

Oil Pans

Engine Oil Cooler Accessories

Camshaft Synchronizers

Engine Oil Dip Stick Tubes

Valve Cover Plugs

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Camshaft Bolts

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

O-Rings

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Oil Pump Kits

Standard Piston Rings

Standard Individual Rod Bearings

Camshaft Plugs

Engine Valves

Standard Single Pistons

Engine Oil Pump Chain Sets

Timing Crank Gears

Expansion Plugs

Engine Variable Timing Solenoid Connectors

Camshaft Followers

Balance Shaft Bearings

Remanufactured Engines

Cylinder Heads

Engine Valve Spring Seat

Piston Pin Bushing Sets

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Timing Cover Repair Sleeve Kit

Essential Engine Parts for 1999 Ford E-250 Econolines

from

$13.99

This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3071.99

Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressure

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your First !
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$312.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$32.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$159.99

The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:

Non-Rotator Type
1.460 in. Outer Diameter
1.060 in. Inner Diameter
1.060 in. Coil Blind
Set of 16

from

$54.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$30.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$70.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$483.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$2.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$298.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$29.99

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$24.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$52.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$31.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$191.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling
Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$11.49

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$58.99

Made in USA. Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high volume oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. High volume gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues

from

$33.99

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking and even twisting damage of the old shaft even when the part appears to be in good condition. Complete every Melling oil pump replacement with a new Melling oil pump shaft.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$50.99

ToughOne ignition distributors and cam synchronizers are 100% new units. They include caps, rotors, and electronic components to ensure a bolt-off/bolt-on solution.

Product Features:

100% tested to original equipment specifications (form, fit and function).
Precision machined ground shafts assure high speed accuracy and prevent bearing failures.
Alignment positioning tool included (where applicable) to ensure proper installation.
100% tested to Original Equipment specifications (form, fit and function).
New Ignition Modules designed and manufactured to meet original equipment specifications.
Stringent sensor vane wheel manufacturing process ensures a fixed pulse width.
Durable aluminum and plastic construction.
100% New Components and fasteners eliminate premature failure.

from

$244.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$25.99

Anchor 2442 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1973-1984
Weight approx: 5 Lbs
Part Group: 2441, 2442

from

$49.99

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$34.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
M12 X 1.50 RH Thread Size
1.7″ Underhead Length

from

$16.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$26.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

Upgrade your 1999 Ford E-250 Econoline with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1999 Ford E-250 Econoline, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Engine Parts are key to keeping your E-250 Econoline functioning at its best. At Advance Auto Parts, we offer a wide selection of 219 Engine Parts for the 1999 Ford E-250 Econoline, designed to meet your needs without breaking the bank. From Engine Mount replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1999 Ford E-250 Econoline at great prices. Our Engine Parts inventory for this model ranges from just $1.29 to $3,387.99, with an average price of $151.46. Our 219 Engine Parts in stock come from 27 trusted brands, so you’re sure to find the right part for your 1999 Ford E-250 Econoline without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Ford E-250 Econoline, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, National, Spartan, and more. Felpro Engine Parts start at just $11.99 and boast an impressive 4.6 stars average rating from customers. National and Spartan also bring quality to the table, with Engine Parts available starting at $12.49, and at an average 4.3 stars rating. With 1,171 customer reviews and counting, our 1999 Ford E-250 Econoline Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Ford E-250 Econoline is always ready to roll. We’re committed to providing you with everything you need to keep your E-250 Econoline in top shape, all in one place. Start shopping confidently below for your 1999 Ford E-250 Econoline!

Best-Selling Engine Mounts for 1999 Ford E-250 Econolines

Enhance the driving experience in your Ford with 4 quality Engine Mount components, starting at $51.99.

show more show less

from

$53.99

Anchor 2929 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2016
Weight approx: 7 Lbs
Part Group: 2929, 2930

from

$51.99

Anchor 2930 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2016
Weight approx: 6 Lbs
Part Group: 2929, 2930

from

$66.99

Anchor 3059 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2003
Weight approx: 6 Lbs
Part Group: 3059, 3060

from

$117.99

Anchor 3060 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2003
Weight approx: 8 Lbs
Part Group: 3059, 3060

Most Popular 1999 Ford E-250 Econoline Engine Gaskets and Seals

Customize your Ford with 21 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $263.99.

show more show less

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$29.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$26.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$30.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$35.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$35.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$52.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$37.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$12.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$66.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$263.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$209.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$75.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$61.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Application specific molded rubber construction
Engineered cross section
Dana engineering-approved for fit, form and function

from

$57.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Molded rubber on rigid carrier
Compression limiters to prevent overtightening
Dana engineering-approved for fit, form and function

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$41.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$34.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications
Meets or exceeds OE specifications

from

$20.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$9.99

Product Features:

Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
Insignificant shrinkage and loss of mass even in high-heat environments
Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
Sealing gap 0.006 in (0.15 mm)

Top Picks for 1999 Ford E-250 Econoline Valve Cover and Cylinder Heads

Upgrade Ford E-250 Econolines with top-quality Valve Cover and Cylinder Heads parts, including 36 OEM and aftermarket selections for your 1999 model.

show more show less

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$59.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$59.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$2.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$30.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$227.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$62.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$57.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$528.99

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats

Product Features:

Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
Kits designed for hydraulic roller cams
.625″ maximum lift springs

from

$24.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$34.99

The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$33.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$62.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$29.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$72.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$16.99

from

$62.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$28.99

OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$72.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$611.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$566.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$551.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$501.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$501.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

In-Demand Camshafts for 1999 Ford E-250 Econolines

Select from 21 premium Camshafts parts for your 1999 Ford E-250 Econoline, with prices ranging from $3.99 to $1,041.00.

show more show less

from

$52.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$11.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$50.99

ToughOne ignition distributors and cam synchronizers are 100% new units. They include caps, rotors, and electronic components to ensure a bolt-off/bolt-on solution.

Product Features:

100% tested to original equipment specifications (form, fit and function).
Precision machined ground shafts assure high speed accuracy and prevent bearing failures.
Alignment positioning tool included (where applicable) to ensure proper installation.
100% tested to Original Equipment specifications (form, fit and function).
New Ignition Modules designed and manufactured to meet original equipment specifications.
Stringent sensor vane wheel manufacturing process ensures a fixed pulse width.
Durable aluminum and plastic construction.
100% New Components and fasteners eliminate premature failure.

from

$31.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$25.99

Carquest camshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each camshaft position sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest camshaft position sensors are a cost-effective solution for your engine management repair. Carquest camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$32.99

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$83.99

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$79.99

Carquest crankshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest crankshaft position sensors are a cost-effective solution for your engine management repair. Carquest crankshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$14.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.99

Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
M12 X 1.50 RH Thread Size
1.7″ Underhead Length

from

$31.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$23.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1041.00

XE 234/238MOD2VPI

from

$1041.00

XE 242/246MOD2VPI

from

$159.99

The Engine Camshaft Synchronizer is a driven device typically mounted to or into the cylinder head of a motor. The Engine Camshaft Synchronizer provides the engine control module (ECM) the precise location of the camshaft for optimal engine operation.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
OE-style brackets, hold downs, hardware, spacers and weather-tight connectors
Proper alignment, positioning and spacing for faster, easier installation
Sensor is properly sealed to prevent leaks
Sealed connections to prevent environmental corrosion and performance issues
Direct OE replacement
Global coverage for import and/or domestic applications

from

$90.99

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$76.99

The Camshaft Synchronizer Alignment Tool is a must have item when replacing the oil pump drive/camshaft synchronizer in certain Ford vehicle applications. This tool will accurately locate the camshaft synchronizer to camshaft sensor during replacement to ensure proper timing of the camshaft sensor to the engine crankshaft sensor.

Product Features:

Application matched components ensure camshaft sensor can be installed correctly returning the vehicle to like new condition.
Allows for proper alignment, positioning and spacing for faster, easier, and proper installation
Precise design tolerances for greater productivity and a precise repair

from

$36.99

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$18.99

Encore Automotive Valve Lifter is a steel cylinder designed to maintain zero valve clearance in a combustion engine.

Product Features:

Precisely tapered and machined to fit the specific application
Designed to conserve energy by reducing heat escape
Designed to conserve energy by reducing heat escapeáá

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 1999 Ford E-250 Econoline Engine Timing Parts

Explore our best-selling Ford parts for the 1999 E-250 Econoline among 36 OEM and aftermarket options starting from $7.49.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$12.49

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$15.29

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$39.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Refer to our online catalog for detailed application-specific information

from

$28.99

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Refer to our online catalog for detailed application-specific information

from

$58.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$58.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$32.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$52.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$34.49

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$276.99

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$32.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$22.99

Advance Auto Parts is proud to carry this part with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

The part is precision machined with high grade material for greater durability
Maintains excellent chain or belt tension
Meets or exceeds O.E.M. performance
Part is quality inspected and tested

from

$44.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the camshaft sprockets work in unison with the timing chain, tensioners, guides, and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$24.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$21.99

Advance Auto Parts is proud to carry this part with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

The part is precision machined with high grade material for greater durability
Maintains excellent chain or belt tension
Meets or exceeds O.E.M. performance
Part is quality inspected and tested

from

$261.99

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$105.99

Both Gears Made From High Alloy Material. Feature “Helical” Tooth Form For Quiet Operation, And Precision Machined Bore For True Fit.”

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
Refer to our online catalog for detailed application-specific information
Set Includes: Camshaft Gear, Crankshaft Gear.

from

$66.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$41.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$36.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$413.99

ENG TIMING CHAIN KIT

from

$321.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: S764T Engine Timing Camshaft Sprocket (1 EA), S766T Engine Timing Camshaft Sprocket (1 EA), S843 Engine Timing Crankshaft Sprocket (1 EA), C391 Engine Timing Chain (2 EA), 9-5396 Engine Timing Chain Tensioner Guide (1 EA), 9-5397 Engine Timing Chain Tensioner Guide (1 EA), 9-5339 Engine Timing Chain Tensioner (1 EA), 9-5338 Engine Timing Chain Tensioner (1 EA), 9-5430 Engine Timing Chain Guide (1 EA), 9-5431 Engine Timing Chain Guide (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$255.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Crankshaft Sprocket, Timing Chain (2), Chain Tensioner (2), Tensioner Guide (2), Chain Guide (2)

Top-Rated Engine Parts Brands For Your 1999 Ford E-250 Econoline

Shop for the best-rated brands offering Engine Parts and other products for your 1999 Ford E-250 Econolines. Below you’ll find some of our best rated Engine Parts from Felpro, National, and Spartan, and more. Engine Parts from these brands that fit a 1999 E-250 Econoline start at just $11.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 1999 Ford E-250 Econoline Engine Parts

When it comes to maintaining or upgrading your 1999 Ford E-250 Econoline, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 1999 Ford E-250 Econoline. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $22.32. Plus, with over 33 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $37.99

(22)

Engine Oil Pan Gasket Set – PermaDry molded rubber

“Fit properly no leaks”

from $16.99

(5)

Engine Valve Cover Grommet Set

“OEM product.”

from $11.99

(6)

Engine Crankshaft Seal Kit

“Great fit”

Popular National 1999 Ford E-250 Econoline Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1999 Ford E-250 Econoline owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1999 E-250 Econoline, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Engine Parts range from $12.49 to $36.49, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $36.49

(1)

Shaft Repair Sleeve

“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”

from $29.99

(2)

Engine Crankshaft Seal

“IT HELPS WHEN GOOD PARTS ARE NEARBY.”

from $12.49

(2)

Engine Harmonic Balancer Repair Sleeve

“This was needed for an off-label application, and has done the job perfectly. Service was outstanding, as always!”

FAQs for 1999 Ford E-250 Econoline Engine Parts

Which Engine Parts are best-sellers for 1999 Ford E-250 Econolines?

Out of 219 Engine Parts that fit 1999 Ford E-250 Econolines, the following parts are the top sellers:

Engine Valve Lifter (19690646) – $11.99
Camshaft Sensor (12339386) – $31.99
Engine Crankshaft Seal Kit (15780257) – $35.99

What’s the price range for 1999 Ford E-250 Econoline Engine Parts?

Engine Part prices for the 1999 Ford E-250 Econoline start at $1.29 and go up to $3,387.99 for the most premium parts.

What’s the average price of a Engine Part for a 1999 Ford E-250 Econoline?

The average price for Engine Parts for the 1999 Ford E-250 Econoline is $151.46. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Ford E-250 Econoline model years?

Yes, we currently carry Engine Parts for 30 model years of Ford E-250 Econolines between 1975 and 2006. Engine Parts are bought most frequently for the following model years: 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1998, and 1997.

What are the cheapest Engine Parts for my 1999 Ford E-250 Econoline?

The cheapest 1999 Ford E-250 Econoline Engine Parts we carry in stock are:

Steel Cup Expansion Plug 1-1/2 In., Height 0.220 (3492249) – $1.29
Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Sold by each) (16140192) – $1.79
Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (22146590) – $1.79
Steel Cup Expansion Plug 1-1/2 In., Height 0.220 (22972463) – $2.29
Engine Push Rod (3718298) – $2.99

What are the top-rated Engine Parts that fit the 1999 Ford E-250 Econoline?

Out of 1,171 reviews by customers, our 1999 Ford E-250 Econoline Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1999 Ford E-250 Econoline and their top-rated products:

Engine Gaskets and Seals
- Engine Oil Pan Gasket Set – PermaDry molded rubber (20688631) – $37.99
- Engine Crankshaft Seal (18443163) – $29.99
- Engine Valve Stem Oil Seal Set (15780068) – $26.99

What types of Engine Parts do you sell for my 1999 Ford E-250 Econoline?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1999 Ford E-250 Econoline:

Can I get help with 1999 Ford E-250 Econoline Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Parts and more.

What is your return policy for Ford E-250 Econoline Engine Parts?

Advance Auto Parts keeps returns simple. For new Ford E-250 Econoline Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Ford E-250 Econoline Engine Parts

Dorman – Rubber Expansion Plug 1-5/8" – Size Range 1-5/8" – 1-3/4" (Sold by each) (Part No.570-010)

Spartan – Engine Long Block; Ford 351M 75-82 Engine (Part No.DF42)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Felpro – Engine Gasket Set (Part No.260-3161)

NTK – Engine Camshaft Position Sensor (Part No.EC0117)

Edelbrock – Sure Seat Valve Springs (Part No.5845)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5432)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72160)

PowerBond – Premium OEM Replacement Harmonic Balancer; 173mm Diameter (Part No.PB1351N)

Spartan – Engine Cylinder Head; Ford 5.4 97-99 CNG Left Head (Part No.2FY6)

Dorman – Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each) (Part No.555-055)

Sealed Power – Engine Gasket Set (Part No.260-1922)

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1041)

Sealed Power – Engine Balance Shaft Bearing Set (Part No.1807M)

Felpro – Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (Part No.OS 13260 T)

Carquest Premium – Crankshaft Sensor (Part No.CSC1248)

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Felpro – Shaft Repair Sleeve (Part No.16207)

Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M-68HV)

Melling Select Performance – Engine Oil Pump Intermediate Shaft (Part No.12840)

Carquest Premium – New Camshaft Synchronizer with Sensor (Part No.T2602)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 122 Links, Timing Components, With Sprockets (Part No.9-0391SB)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.2442)

Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-74)

ARP Auto Racing – 4.6L/ 5.4L Ford Small Block Modular V8, 200000Psi Tensile, M12 X 1.5" Thread (Part No.256-1001)

Victor Reinz – Engine Oil Cooler Gasket (Part No.71-14068-00)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72891)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.2929)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.2930)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.3059)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.3060)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30725 R)

National – Engine Crankshaft Seal (Part No.3909)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72891)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40620)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50441 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40644)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50481 R)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45984)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45982-1)

Felpro – Engine Oil Pan Gasket Set – RTV Black silicone with Rubber end seals (Part No.OS 30625 R)

Felpro – Engine Conversion Gasket Set (Part No.CS 9790-5)

Felpro – Engine Gasket Set (Part No.260-1923)

Felpro – Engine Gasket Set (Part No.260-1917)

Victor Reinz – Engine Conversion Gasket Set (Part No.08-10055-01)

Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-10670-01)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10264-01)

Felpro – Engine Conversion Gasket Set (Part No.CS 9250)

Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-10642-01)

Victor Reinz – Fuel Injection Plenum Gasket (Part No.71-14755-00)

Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-10641-01)

Victor Reinz – RTV Silicone (Part No.70-31414-10)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 71189)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9790 PT-2)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9792 PT-2)

Sealed Power – Engine Push Rod (Part No.RP-3284)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72160)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9250 PT-2)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9253 PT)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)

Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)

Sealed Power – Engine Valve Lifter (Part No.HT-2205)

NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9250 PT)

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1041)

Dorman – Valve Covers: with Gasket, Direct Replacement, Aluminum (Part No.264-979)

Sealed Power – Engine Exhaust Valve (Part No.V-4603)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26505 PT)

NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0007)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26506 PT)

Spartan – Engine Cylinder Head; Ford 5.4 02-03 Left Head (Part No.2FCT)

Spartan – Engine Cylinder Head; Ford 5.4 97-99 CNG Right Head (Part No.2FY4)

Spartan – Engine Cylinder Head; Ford 5.4 02-03 Right Head (Part No.2FCU)

Spartan – Engine Cylinder Head; Ford 5.4/4.6 97-99 Right Head (Part No.2FV7)

Spartan – Engine Cylinder Head; Ford 5.4/4.6 97-99 Left Head (Part No.2FX7)

Sealed Power – Engine Camshaft Bearing Set (Part No.1886M)

Sealed Power – Engine Valve Lifter (Part No.HT-2271)