from

$193.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$52.30

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Sangsin manufactures and designs it’s brake pads to original equipment specifications for quality long lasting performance and is the OE supplier for major Korea automakers including Hyundai and Kia Motors. Sangsin is the largest friction manufacturer in Korea and has been devoted to manufacturing, researching and developing brake pads, linings and other vehicle friction material for over 40 years. Sangsin has eliminated friction materials that create black dust and noise and ensures quiet braking and clean wheels.

Product Features:

OE Ceramic formulation: Excellent fade resistance, Extremely low dust characteristics
Incorporates precision fit shims, OE positive mold design technology
OEM technology: Chamfered and Slotted to reduce noise when braking
Scorched as same as OE process in order to minimize the need for initial break-in and increase initial stopping power
2-stage press process Fine blanked backing plate: insure precise fit and function
Underlayer between friction and backing plate to promote better friction to plate adhesion an minimize noise
OE level shim with premium Rubber-Steel-Rubber shim

from

$7.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Helps deliver a quieter, more efficient braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$15.29

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$16.79

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span and maximizes performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$30.49

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span and maximizes performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
Helps deliver a quieter, more efficient braking system
Low-friction PTFE coating to reduce drag
Manufactured with quality materials to suppress high stress levels

from

$15.99

Abutment clips

from

$14.79

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents premature wear and maximizes performance
Helps deliver a quieter, more efficient braking system
Manufactured with quality materials to suppress high stress levels

from

$146.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$21.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$10.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$31.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
Featuring industrial grade materials for robust performance
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$15.99

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

Each unit is 100% new, providing consistent performance when servicing your brake system
Easy to transfer for on-the-spot master cylinder bleeding
Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
Easy to clean to ensure no cross contamination
Durability for long lasting performance

from

$24.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$17.46

Febi’s wheel cylinder’s are always produced with the highest precision and are designed to fit extremely accurately. Febi’s wheel cylinders are manufactured using lightweight aluminum or cast iron to match the original design. The EPDM rubber used in Febi’s wheel cylinder is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:

Resistant to corrosion and to brake fluid
Provides a longer service life
Made with high quality EPDM rubber cups and boots for long lasting performance
Manufactured to OE Quality specifications

from

$13.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features: