Name: Water Pump Cartridge for Small-Block Chevy (Race Style)
Brand: Edelbrock
SKU: 8827
Price: 457.99 USD

Essential 1999 Chevrolet Camaro Performance Engines

from

$457.99

Edelbrock #8827 Water Pump small block Chevy cartridge style race ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling

Product Features:

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
5.8125 in. Block To Hub Height
Satin Finish

from

$433.99

These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Chevrolet V8 265-400 applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

Product Features:

CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Designed for high performance street and race engines
Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
Additional clearance, up to 1.650″ O.D. valve spring

from

$10.99

10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring

from

$135.99

Product Features:

Use W/ Valve Springs Part #5762, 5795
Use W/ Locks Part #9612
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$963.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
287/305 Advertised Duration, 235/249 Duration @ .050″, .489″/.476″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$342.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.
292/292 Advertised Duration, 244/244 Duration @ .050″, .550″/.550″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$77.99

Edelbrock part No. 7342 head gasket is intended for SBC LT1/LT4 engines. This gasket comes as a set.

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$492.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

from

$379.99

Strip Dominator intake manifold square bore carburetor mounting flange. Single plane with isolated plenum. Isolated water cross-over.

Product Features:

Single Plane With Isolated Plenum
Square Bore Carburetor Mounting Flange
Isolated Water Cross-Over
Power Band 4500-7600 rpm
Height Front 5.11 in. Rear 5.97 in.
Port Size 2.05 in. Height 1.22 in. Width
No Exhaust Heat Crossover Provision
Ideal For Drag Cars w/Auto Trans.

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$266.99

Product Features:

Non-Rotator
1.500 in. Outside Diameter
1.082 in. Inside Diameter
1.340 in. Coil Blind
Set of 16

from

$83.99

COMP Cams Hi-Tech Roller Race Timing Sets include cast iron camshafts gears, induction hardened billet steel crank sprockets, and pre-stretched, heat-treated double roller chains with heavy-duty large pin design. They feature 3 keyway crank sprockets for

Product Features:

Cast iron camshaft gear and induction hardened billet steel crank sprocket
Pre-stretched, heat-treated true double roller chain with heavy-duty large pin design; chain available separately
Ideal for all street performance and race applications
Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
Dynamically balanced and quality checked for run-out tolerances

from

$66.99

COMP Cams High Energy Timing Chain Sets include precision cast iron camshaft and crank gear sprockets and premium quality link belt type timing chain. These sets exceed all original equipment timing chain specifications and are ideal for stock replacement and mild performance applications.

Product Features:

Exceeds all original equipment timing chain specifications
Premium quality link belt type chain for exceptional durability; chain also available separately
Precision cast iron camshaft and crank gear sprockets
Ideal for stock replacement and mild performance applications

from

$201.99

Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

Product Features:

7.2 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$199.99

Product Features:

Case-Hardened Tubing
Welded Ends
5/16 in. Diameter
Use with or without Hardened Steel Guideplates

from

$562.99

HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$337.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$37.99

Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:

Opens sooner than stock at 160 degrees
High flow design for performance applications
Includes rubber o-ring seal/gasket
Incorporates pressure relief valve

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$719.99

COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.

Product Features:

For GM LS series applications
includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
Replaces stock valve train components for more usable horsepower and higher rpm range

FAQs for 1999 Chevrolet Camaro Performance Engines

What are the best-selling Performance Engines for 1999 Chevrolet Camaros?

Out of 44 Performance Engines that fit 1999 Chevrolet Camaros, the following parts are the top sellers:

Ls1 Late Thermostat (11151861) – $37.99
Performance Cylinder Head Gasket (19782376) – $61.99
Steel Retainers, 1.055" For Ls Beehive 1 St (10214793) – $85.99

What’s the price range for 1999 Chevrolet Camaro Performance Engines?

The prices of Performance Engines for the 1999 Chevrolet Camaro range from $8.99 up to $1,870.00 for the most premium parts.

What is the average price of a Performance Engine for a 1999 Chevrolet Camaro?

The average price for Performance Engines for the 1999 Chevrolet Camaro is $456.25. Keep in mind the variety of part types within our Performance Engine category, where you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance Engines for other Chevrolet Camaro model years?

Yes, we carry Performance Engines for 41 model years of Chevrolet Camaros between 1967 and 2016. The following model years are the most popular for Performance Engine purchases: 2002, 2001, 2000, 1998, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Performance Engines for my 1999 Chevrolet Camaro?

The cheapest 1999 Chevrolet Camaro Performance Engines we carry are:

Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (50288908) – $8.99
Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (50288903) – $8.99
Camshaft Lock Plate w/ Bolts for GM LS GEN III/IV with 3 Bolt Camshaft (50288119) – $18.99
Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod (50289657) – $19.99
Hi-Tech 7.325" Long, .080" Wall, 5/16" Diameter Pushrod (50289335) – $20.99

Does Advance Auto Parts sell Performance Engines for any other 1999 Chevrolet models?

Yes. We stock Performance Engines for 25 other popular 1999 Chevrolet models. Some of the most popular are 1999 Tahoe Performance Engines, 1999 Silverado 1500 Performance Engines, 1999 Monte Carlo Performance Engines, 1999 Corvette Performance Engines, and 1999 Express 2500 Performance Engines.

What types of Performance Engines do you sell for my 1999 Chevrolet Camaro?

As of 3/1/26, these are some of the most in-demand types of Performance Engines for a 1999 Chevrolet Camaro:

Can I get help with 1999 Chevrolet Camaro Performance Engine orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance Engines and more.

What is your return policy for Chevrolet Camaro Performance Engines?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Performance Engines and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Chevrolet Camaro Performance Engines

Edelbrock – Water Pump Cartridge for Small-Block Chevy (Race Style) (Part No.8827)

Competition Cams – Rocker Arms, Ultra Gold Small Block Chevy 1.6 1 St (Part No.19002-16)

Competition Cams – 10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring (Part No.750-1)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9731)

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit (Part No.CL12-601-4)

Competition Cams – Magnum/O-Track 244/244 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-213-3)

Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7342)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

Edelbrock – RPM Air-Gap Big Block Chevy 2-R Intake Manifold (Part No.7562)

Holley – Strip Dominator; Intake Manifold (Part No.300-25)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5895)

Competition Cams – TIMING SET, HIGH TECH SMALL BLOCK CHEVY 1 EA (Part No.3100)

Competition Cams – High Energy Timing Set (Part No.3200)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

B & M – Holeshot 2400 (Part No.20412)

B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)

Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)

Holley – LS Carbureted Manifold – 2×4 Dual Plane GM LS1/LS2/LS6 (Part No.300-120)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Competition Cams – ENGINE ROCKER ARM (Part No.19024-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1675-1)

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Edelbrock – RPM-Link Adjustable True-Roller Timing Chain Set (Part No.7343)