1998 Oldsmobile LSS Brake Parts

Name: Body Bolt - M6-1.0 X 25mm
Brand: Dorman
SKU: 963-232D
Price: 4.49 USD

Below you will find various in-demand Oldsmobile Brake Parts, components and accessories for your 1998 LSS. Advance Auto Parts has popular LSS parts like Brake Hoses, Brake Calipers, Brake Rotors and Drums and more. You’ll also find aftermarket and OEM Brake Parts for other LSS model years including 1996, 1997, 1999 and more. Select a category of 1998 Oldsmobile LSS Brake Parts below and start saving instantly.

Popular 1998 Oldsmobile LSS Brake Parts Categories

Front Brake Rotors

Rear Brake Pads and Shoes

Front Brake Pads and Shoes

Rear Brake Drums

Front Brake Calipers

Disc Brake Pad and Rotor Kits

Brake Wheel Cylinders

ABS Modulator Relays

Power Brake Boosters

Brake Caliper Bolt and Pins

Brake Self Adjuster Kits

ABS Relays

Brake Master Cylinders

Brake Hoses

Brake Hardware Kits

ABS Harness Connectors

Master Cylinder Caps and Gaskets

Brake Hose To Caliper Bolt Washers

Brake Hose Bolts

Power Brake Booster Check Valves

Brake Light Switch Connectors

ABS Wheel Sensor Brackets

Brake Fluid Sensors

Brake Pressure Modulator Pump Motor Connectors

ABS Control Module Bolts

Brake Caliper Kits

Parking Brake Switches

Brake Fluid Level Switch Connectors

Power Brake Booster Sensor Connectors

Power Brake Booster Pressure Sensor Connector

Essential Brake Parts for 1998 Oldsmobile LSSes

from

$4.49

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$62.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$77.10

ACDelco Advantage brake rotors and drums feature the fit, form and function of premium aftermarket brakes at a more economical price. The ACDelco Advantage line offers dependability, performance and great value – without sacrificing important features and benefits.

Product Features:

No machining required – ready to be installed right out of the box
Rust-preventative coating
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design

from

$34.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$51.99

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$19.99

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$34.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$20.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.99

This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles.
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

This brake hydraulic hose to caliper bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$191.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
Stainless-steel pad shims resist the increased temperatures common on high performance applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$90.99

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Direct replacement for a proper fit
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.038 mm
Main cylinder hole of measured by the 0.034 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$24.19

A wheel drum hardware kit with adjuster and adjuster springs. Replace worn self-adjusting levers and frozen adjusting screws for proper drum brake self-adjustments.

from

$2.29

This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$116.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$68.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$22.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$47.30

Booster Check Valve

from

$7.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance.
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$29.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$45.02

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

Original Equipment Performance
Solid Pedal Feel With Smooth Braking Performance
Ultra-Quiet Ceramic Formulation
Low Dust – Long Life
Advanced Material Platform Specific Shims
Scorched for Easy Break In
Positive Mold Construction
All WBR Pads are 100% Shimmed

from

$17.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
Recommended replacement is suggested when servicing drum brake
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$47.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$75.81

Wagner® QuickStop® brake shoes utilize professional-grade friction materials that mirror original equipment and utilize OE-required riveted or bonded configurations.

Product Features:

Precision ground maximizes friction-to-drum contact
Attached levers and pins included to match OE (on specific applications)
Comprehensive coverage for foreign and domestic nameplates
Install Wagner with total confidence

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$7.79

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$96.99

Carquest Professional coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Professional coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:

corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
long-lasting performance.
Manufactured to exacting quality and dimensional specifications for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Non-directional finish for decreased break-in time and reduced brake noise
Brand may vary by location

Upgrade your 1998 Oldsmobile LSS with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1998 Oldsmobile LSS, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Brake Parts are key to keeping your LSS functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Brake Parts for the 1998 Oldsmobile LSS, designed to meet your needs without breaking the bank. From Brake Hose replacements to Brake Calipers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1998 Oldsmobile LSS at great prices. Our Brake Parts inventory for this model ranges from just $1.29 to $191.99, with an average price of $44.91. Our 79 Brake Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 1998 Oldsmobile LSS without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Oldsmobile LSS, we stock popular OEM and aftermarket Brake Parts from top names like Carquest, Dorman, Carquest Premium, and more. Carquest Brake Parts start at just $2.49 and boast an impressive 4 stars average rating from customers. Dorman and Carquest Premium also bring quality to the table, with Brake Parts available starting at $1.29, and at an average 4 stars rating. With 1,538 customer reviews and counting, our 1998 Oldsmobile LSS Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Oldsmobile LSS is always ready to roll. We’re committed to providing you with everything you need to keep your LSS in top shape, all in one place. Start shopping confidently below for your 1998 Oldsmobile LSS!

Best-Selling Brake Hoses for 1998 Oldsmobile LSSes

Enhance the driving experience in your Oldsmobile with 11 quality Brake Hose components, starting at $2.29.

show more show less

from

$2.49

This part matches Original Equipment (OE) quality specifications
Easy and Exact fitment
A necessary safety item for protecting the brake lines from harm
Restores brakes to like-new performance

from

$8.49

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$29.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$9.99

This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.29

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$22.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$30.29

ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle’s braking system.

Product Features:

Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Premium brass fittings provide an excellent hydraulic seal
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

from

$30.16

Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Premium brass fittings provide an excellent hydraulic seal
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Most Popular 1998 Oldsmobile LSS Brake Calipers

Customize your Oldsmobile with 6 Brake Calipers products like Front Brake Calipers and Brake Caliper Bolt and Pins, all priced under $91.47.

show more show less

from

$51.99

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$90.59

ACDelco Professional Reman Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. These unloaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Reman Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These premium aftermarket replacement reman friction ready disc brake calipers are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Pressure tested to ensure safe and confident braking
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Developed without attached brake pads for customization

from

$51.99

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$23.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$91.47

Pressure tested to ensure safe and confident braking
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Developed without attached brake pads for customization

from

$51.74

Brake Caliper

Top Picks for 1998 Oldsmobile LSS Brake Rotors and Drums

Upgrade Oldsmobile LSSes with top-quality Brake Rotors and Drums parts, including 7 OEM and aftermarket selections for your 1998 model.

show more show less

from

$80.99

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$53.99

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$96.99

corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
long-lasting performance.
Manufactured to exacting quality and dimensional specifications for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Non-directional finish for decreased break-in time and reduced brake noise
Brand may vary by location

from

$77.10

No machining required – ready to be installed right out of the box
Rust-preventative coating
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design

from

$69.47

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment – G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

from

$123.53

Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:

OE-Equivalent and a direct fit replacement
Prevent rust and corrosion with clear-look coating protection
Provide a clean look for today’s open-wheeled vehicles
Are 100% balanced for smooth operation
Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure

from

$83.92

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. Brembo UV Coating Technology : Brembo is the first to offer UV coating technology engineered for our leading OE customers with a unique metallic finish developed exclusively for the Aftermarket. The UV coated disc does not require cleaning and degreasing. These discs are ideal for vehicle with alloy wheels and for motorists for whom attention to detail is a prerequisite. PVT pillar venting technology: ( Vented Rotors Only ) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

Metallic finish that maintains a clean and bright appearance over the entire life span of the disc
Protective coating on braking plate surfaces, external diameter and disc hub to ensure complete protection
New location for minimum thickness control with greater ease of reading for service professionals
Water-based paint free of chemical solvents – Energy efficient UV coating process
Superior to products currently on the market proven by resistance to: Salt spray testing, Humidity and High temperatures BREMBO UV COATED DISCS BROCHURE

In-Demand Brake Pads and Shoes for 1998 Oldsmobile LSSes

Select from 15 premium Brake Pads and Shoes parts for your 1998 Oldsmobile LSS, with prices ranging from $35.99 to $157.87.

show more show less

from

$36.99

Carquest Platinum Professional brake pads are a premium alternative to original equipment brake pads that provide superior stopping performance, quieter braking and cleaner wheels. All CQ Platinum Professional brake pads are manufactured by a vertically

Product Features:

Industry leading number of application specific formulations for maximum performance, extended pad life, and clean wheels
On-vehicle testing similar to original equipment tests
Patented 4-layer HEX shim Technology provides silent braking
Burnishing compound allows for a proper break-in of pads and rotors
Hardware and caliper pin grease included where required to complete the job

from

$39.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$64.99

Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Powder-coated backing plate prevents corrosion

from

$39.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$53.99

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$75.81

Wagner® QuickStop® brake shoes utilize professional-grade friction materials that mirror original equipment and utilize OE-required riveted or bonded configurations.

Product Features:

Precision ground maximizes friction-to-drum contact
Attached levers and pins included to match OE (on specific applications)
Comprehensive coverage for foreign and domestic nameplates
Install Wagner with total confidence

from

$47.06

ACDelco Professional DuraStop Semi-Metallic Disc Brake Pads are formulated with steel strands to provide strength and conduct heat away from the rotor’s surface while offering quality braking power. ACDelco Professional DuraStop Semi-Metallic Brake Pads are designed to meet OE standards for fit, form and function, and they are engineered to help resist corrosion and premature wear. Independently tested using D3EA and SAE J2784 standards, ACDelco Professional DuraStop Semi-Metallic Brake Pads offer exceptional performance and include noise-dampening shims, where applicable.

Product Features:

Designed for towing or extreme braking environments
Chamfered, slotted and shimmed to provide similar fit, form and function of the OE service part
Hardware clip kits included (where applicable)
Tested to D3EA SAE2784 standards to help assure quality

from

$157.87

These GM Original Equipment parts replace those installed during the production of a GM vehicle and are designed to be of similarly high quality. ACDelco GM OE Disc Brake Pads provide optimum noise suppression and performance using unique formulations and combined with shims, slots and chamfers where needed. Each disc brake pad backing plate is protected by a premium powder coated finish, ensuring professional protection and appearance.

Product Features:

Chamfered, slotted and shimmed to provide similar fit, form and function of the OE service part.
Hardware clip kits included (where applicable).
Designed to provide optimum performance and durability.
Each disc brake pad backing plate is protected by a premium powder coated finish, ensuring professional protection and appearance.
Tested to SAE2430 SAE2784 to assure quality.

from

$92.94

For replacement brake pads that are designed for your vehicle, trust the name that manufacturers trust Akebono Pro-ACT® Ultra-Premium brake pads. Manufactured from carefully selected materials designed to help minimize and/or virtually eliminate unwanted brake dust, Pro-ACT Ultra-Premium brake pads provide consistent, smooth stopping power across a wide range of driving conditions, including panic stops. Replacement Brake Pads from the Creators of Akebono Ceramic Technology® Engineered to eliminate noise, vibration, and harshness, Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, Pro-ACT Ceramic Disc Pads are also ideal for upgrading from conventional pads. In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel, and ultra-low dusting for cleaner wheels and tires. Akebono’s ceramic technology also causes minimal wear on brake rotors.

Product Features:

Virtually eliminates noise, vibration, and harshness (NVH)
Vehicle-optimized ceramic formulas for superior performance
Unrivaled stopping power
Clean wheels
No break-in required
Rotor-friendly with proven longer rotor life
Perfect upgrade for all braking systems
Made in the USA

from

$79.20

Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:

OE-Equivalent and Direct Fit application.
OE style rubber-core shims
Advanced, platform-specific Semi Metallic formulation
Dedicated engineers source and rigorously test all friction materials and formulations
Manufactured under the same exacting quality standards as OE components and system
Powder-coated backing plate
Rigorous physical and dynamometer testing
Synthetic lubricant in box
Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
Provides maximum stability resulting in quieter shim performance over the life of the pad

from

$75.70

Choosing the right Semi Metallic brake pads is a big decision: after all, they will be fitted to a vehicle carrying precious cargo; so you need to make an informed choice and get it right. With more than 100 years’ experience, we are pioneers in the development of braking systems and technologies and work closely with the world’s leading vehicle manufacturers. As a consumer, you should expect safety, quality and performance from a brake pad. With its superior range of Semi Metallic Brake Pads, TRW offers you all that, and more. We design our Semi Metallic Brake Pads using vehicle-optimized friction formulations which are focussed on eliminating noise, vibration and harshness (NVH) and severely reducing wheel dust; while at the same time increasing durability and smooth braking actions. We engineer our brake pads to precise Original Equipment (OE) standards, and test them to the extreme both in the lab and in real life, real road situations at every speed and on every terrain. In addition, our Semi Metallic Brake Pads deliver what we in the business call ‘fadeless performance’ to counteract the heat that braking in heavy traffic creates which could result in a lack of performance. All TRW products are taken to market under the ‘Safety’ strapline. We never deviate from this and we never compromise because we believe that every stop could be that safety critical stop. We wouldn’t put our name to something that we wouldn’t fit in our own vehicles to transport our own families. All of this adds up to one fact: You really can trust TRW to provide superior Semi Metallic Brake Pads to deliver the ultimate in braking experience.

Product Features:

For the best and safest performance – we mirror OE and provide the optimum friction formulation for each make and model
For the quietest braking – TRW applies ‘bonded Nitrile rubber-coated steel shims; proven to be the best noise damping material to all its Semi Metallic Brake Pads
The intelligent design includes slots and chamfers which prevents dirt and dust build up on the friction surface; giving more effective contact and reducing noise
Using the latest technology, TRW designs its Semi Metallic Brake Pads with an emphasis on dust reduction; giving you the safest stop while keeping your wheels clean
We provide all necessary accessories, including installation hardware and grease, together with fitting instructions with each part for a safe and easy brake pad change
TRW covers 98% of all vehicles on the road in North America both imports and domestic

from

$56.91

THE “ONE-PIECE” BRAKE PAD THAT PROVIDES QUIETER BRAKING. Wagner® ThermoQuiet® brake pads are the quieter, “one-piece” brake pads. They feature Integrally Molded Sound Insulator (IMI) that integrates the friction material, backing plate and insulator into a single high strength component. The application-specific design spreads out heat, sound and vibration over a much larger surface area for quieter operation. A unique application-specific laser-shaped friction optimizes pad-to-rotor interface for better braking performance. The proprietary Wagner® OE21 formulations feature a complex matrix of materials that replicate the functions of copper while setting new benchmarks and providing across-the-board improvements in NVH control, stopping power, durability and dusting characteristics.

Product Features:

Quieter performance
Superior stopping power
Longer pad life
Comprehensive coverage for foreign and domestic nameplates
Install Wagner Brake products with total confidence

from

$45.02

Original Equipment Performance
Solid Pedal Feel With Smooth Braking Performance
Ultra-Quiet Ceramic Formulation
Low Dust – Long Life
Advanced Material Platform Specific Shims
Scorched for Easy Break In
Positive Mold Construction
All WBR Pads are 100% Shimmed

from

$41.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$35.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

Most Sold 1998 Oldsmobile LSS Brake Kits

Explore our best-selling Oldsmobile parts for the 1998 LSS among 8 OEM and aftermarket options starting from $7.49.

show more show less

from

$7.79

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$7.49

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$12.49

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the Life Span and Improves the Performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$8.29

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$191.99

This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
Stainless-steel pad shims resist the increased temperatures common on high performance applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$163.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$24.19

A wheel drum hardware kit with adjuster and adjuster springs. Replace worn self-adjusting levers and frozen adjusting screws for proper drum brake self-adjustments.

from

$8.27

Brake Hardware Kit

Top-Rated Brake Parts Brands For Your 1998 Oldsmobile LSS

Shop for the best-rated brands offering Brake Parts and other products for your 1998 Oldsmobile LSSes. Below you’ll find some of our best rated Brake Parts from Carquest, Dorman, and Carquest Premium, and more. Brake Parts from these brands that fit a 1998 LSS start at just $1.29 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1998 Oldsmobile LSS Brake Parts

When it comes to maintaining or upgrading your 1998 Oldsmobile LSS, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1998 Oldsmobile LSS. With over 19 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $28.55. Plus, with over 591 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$22.99

This product is not rated

Brake Hose Assembly: Copper Washers Included

“”

from
$31.05

This product is not rated

A/C Compressor Clutch Relay Connector

“”

from
$15.99

This product is not rated

Multi Purpose Relay

“”

Popular Dorman 1998 Oldsmobile LSS Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1998 Oldsmobile LSS owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1998 LSS, Advance Auto Parts carries a full inventory of 10 Dorman Brake Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Dorman Brake Parts range from $1.29 to $9.99, plus, with more than 75 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from
$3.99

This product is not rated

Banjo Bolt M10-1.5 X 23

“”

from
$2.29

This product is not rated

Banjo Bolt Washer 10.3mm X 16.9mm

“”

from
$4.49

This product is not rated

Body Bolt – M6-1.0 X 25mm

“”

FAQs for 1998 Oldsmobile LSS Brake Parts

Which Brake Parts are best-sellers for 1998 Oldsmobile LSSes?

Out of 79 Brake Parts that fit 1998 Oldsmobile LSSes, the following parts are the top sellers:

Brake Hydraulic Hose Clip (5310148) – $2.49
Body Bolt – M6-1.0 X 25mm (11910833) – $4.49
Brake Hose Bolts M10-1.5 X 22.8mm (5012759) – $8.49

What’s the price range for 1998 Oldsmobile LSS Brake Parts?

Brake Part prices for the 1998 Oldsmobile LSS start at $1.29 and go up to $191.99 for the most premium parts.

What’s the average price of a Brake Part for a 1998 Oldsmobile LSS?

The average price for Brake Parts for the 1998 Oldsmobile LSS is $44.91. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Oldsmobile LSS model years?

Yes, we currently carry Brake Parts for 3 model years of Oldsmobile LSSes between 1996 and 1999. Brake Parts are bought most frequently for the following model years: 1999, 1997, and 1996.

What are the cheapest Brake Parts for my 1998 Oldsmobile LSS?

The cheapest 1998 Oldsmobile LSS Brake Parts we carry in stock are:

Body Bolt With Washer – M6-1.0 X 25mm (Sold by each) (22141637) – $1.29
Panel Trim Retainer – Interior – GM/Chrysler/AMC (5029937) – $1.79
Banjo Bolt Washer 10.3mm X 16.9mm (22972282) – $2.29
Brake Hydraulic Hose Clip (5310148) – $2.49
Banjo Bolt M10-1.5 X 23 (22972457) – $3.99

What are the top-rated Brake Parts that fit the 1998 Oldsmobile LSS?

Out of 1,538 reviews by customers, our 1998 Oldsmobile LSS Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1998 Oldsmobile LSS and their top-rated products:

Brake Rotors and Drums
- Disc Brake Rotor Meets or Exceeds OE Design (15670005) – $80.99
- Brake Drum: Meets or Exceeds OE Specs (5672457) – $53.99
- Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (10840385) – $96.99
Wheel Cylinders
- Disc Brake Rotor Meets or Exceeds OE Design (15670005) – $80.99
- Brake Drum: Meets or Exceeds OE Specs (5672457) – $53.99
- Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (10840385) – $96.99

What types of Brake Parts do you sell for my 1998 Oldsmobile LSS?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1998 Oldsmobile LSS:

Can I get help with 1998 Oldsmobile LSS Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Brake Parts and more.

What is your return policy for Oldsmobile LSS Brake Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile LSS Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Oldsmobile LSS Brake Parts

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT1798)

ACDelco – Advantage Brake Drum (Part No.N2000593886ACD)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1091)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4600)

Driveworks – A/C and Heater Relay (Part No.83264)

ACDelco – 4-Way Female Black Multi-Purpose Pigtail (Part No.PT483)

Carquest Premium – Multi Purpose Relay (Part No.RAA1243)

Dorman – Help – Brake Master Cylinder Gasket (Part No.42072)

Dorman – Banjo Bolt M10-1.5 X 23 (Part No.484-205.1)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K1534-26)

Carquest Wearever – Brake Master Cylinder MCA390267: New, With Reservoir (Part No.MCA390267)

Wagner – Brake Auto Adjuster Hardware Kit (Part No.H2628)

Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)

Dorman – Panel Trim Retainer – Interior – GM/Chrysler/AMC (Part No.45490)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74802)

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1638)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38951)

ACDelco – Booster Check Valve (Part No.N4030595315ACD)

Carquest – Parking Brake Switch (Part No.S998)

ACDelco – 2-Way Female Gray Multi-Purpose Pigtail (Part No.PT307)

World Brake Resources – Ceramic Brake Pads (Part No.N1010417765WBR)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37677)

ACDelco – 3-Way Male White Multi-Purpose Pigtail (Part No.PT1035)

Wagner – Brake QuickStop Drum Brake Shoe Set (Part No.N2010978273WAG)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8209A)

Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (Part No.YH145250C)

Carquest Wearever – Brake Hydraulic Hose Clip (Part No.1457-2)

Dorman – Help – Brake Hose Bolts M10-1.5 X 22.8mm (Part No.13940)

Dorman – Help – Brake Hose Washer – Id 10.3mm, Od 16.91mm, Thickness 1.2mm (Part No.66223)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380261)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380271)

Dorman – Help – Brake Line Retaining Clips (Part No.13987)

Dorman – Banjo Bolt M10-1.5 X 23 (Part No.484-205.1)

Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38951)

ACDelco – Professional DuraStop Hydraulic Brake Hose Assembly (Part No.N7000578017ACD)

ACDelco – Professional DuraStop Hydraulic Brake Hose Assembly (Part No.N7000578018ACD)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4601)

ACDelco – Professional DuraStop Friction Ready Brake Caliper – Remanufactured (Part No.N1040577774ACD)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4600)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5053)

ACDelco – Professional DuraStop Friction Ready Brake Caliper – Remanufactured (Part No.N1040577773ACD)

Autopart International Inc – Brake Caliper (Part No.N10401922178API)

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145250)

Carquest Wearever – Brake Drum: Meets or Exceeds OE Specs (Part No.YH140451)

Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (Part No.YH145250C)

ACDelco – Advantage Brake Drum (Part No.N2000593886ACD)

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000939538WBC)

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N1000939538BOS)

Brembo – Premium UV Coated OE Replacement Brake Disc (Rotor) (Part No.N1000154810BRC)

Carquest Professional Platinum – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.PMD623H)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD623)

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet (Part No.PXD623H)

Carquest Wearever – Brake Shoes (Part No.S636)

Carquest Premium Gold – Brake Pads: With Hardware, Semi-metallic, Long Life and Quiet (Part No.GMKD623)

Wagner – Brake QuickStop Drum Brake Shoe Set (Part No.N2010978273WAG)

ACDelco – Professional Semi-Metallic DuraStop Severe Duty Brake Pads (Part No.N1010592677ACD)

ACDelco – GM Original Equipment Brake Pads (Part No.N1010323110ACD)

Akebono – Pro-ACT Ultra-Premium OE Ceramic Brake Pads (Part No.N1010131880AKE)

Bosch – QuietCast Premium Brake Pads – w/ Hardware and Shims (Part No.N1010441190BOS)

TRW – Automotive Premium Metallic Brake Pads (Part No.N1010921849TRW)

Wagner – ThermoQuiet OE Semi-Metallic Disc Pad Set (Part No.N1010932469WAG)

World Brake Resources – Ceramic Brake Pads (Part No.N1010417765WBR)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-623)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-623)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8209A)

Carquest Wearever – Drum Brake Hardware Kit (Part No.7203)

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2628)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K1534-26)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K1534)

Wagner – Brake Auto Adjuster Hardware Kit (Part No.H2628)

Autopart International Inc – Brake Hardware Kit (Part No.N10611926015API)