1998 Jeep Wrangler Bodies and Fender Parts

The TCR bag has been designed to mount to Rugged Ridge RRC, XHD and Classic rear tire carrier bumpers. This bag allows the storage of all your recovery gear between the A-frame uprights on your rear tire carrier. Constructed of weather resistant material

Product Features:

• Textured Black

With these polyurethane body mount bushings, you can drastically improve your ride in just a few hours. One of the best and most cost-effective ways to improve the handling and feel of your pride and joy is to replace those mushy and worn-out body mount b

Product Features:

• Polyurethane
• Direct Fit
• Higher Level of Performance
• Long-lasting
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Westin Snyper Tubular Rear Fenders are made to protect from flying debris and provide a high clearance for Jeeps riding on large tires. Made of textured black powder coated 14 gauge 4 7/8 in. wide steel with a 1.5 diameter welded fender tube. Fenders feature a welded lip design to keep plastic inner fender in place. Fender welt is included for a finished look. All needed installation hardware is included with this bolt-on no drill installation. Sold in pairs. Front Snyper Tubular Front Fenders available sold separately.

Product Features:

• Protect From Flying Debris
• High Clearance For Jeeps With Large Tires
• Made Of 14 Gauge Steel
• 4 7/8 In. Wide Fender
• 1.5 in. Diameter Tube
• Mating Seam Is Silicone Sealed To Prevent Rust
• Welded Lip Design Keeps Plastic Inner Fender In Place
• Fender Welt Included For A Finished Look
• Sold In Pairs
• Hardware Included

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement bump stops for the 2007-2016 Jeep Wrangler (JK). These 2.0″ diameter bump stops feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will conveniently mount within the front coil springs on your daily driven vehicle. This kit offers extra bottom out protection for unexpected situations. These front bumps stops are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and works with any size lift kit.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• 1 3/8 Polished Chrome Steel Shaft
• Nitrogen over Hydraulic Damping
• Fully Synthetic Shock Oil

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• OE Style
• Direct Fit
• Limited 5 Year Warranty

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

This black RRC rear bumper tire carrier has a frame mounted platform that features a heavy duty grid like system with raised sides for the ultimate protection and greatest ground clearance. Features 5X 4.5 bolt pattern. All RRC rear bumpers feature a rein

Product Features:

• Black

New Standard Replacement Driver Side Floor Brace, 53 X 13 X 6

Product Features:

• 53 X 13 X 6, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

This pair of weather resistant stainless steel rear corner body guards protect the lower edges of your Jeep while adding a touch of style at the same time. All Rugged Ridge Stainless Accessories are constructed of prime 304 stainless steel polished to a m

Product Features:

• Stainless Steel
• Weather Resistant
• Pair
• Hardware Included
• Limited 5 Year Warranty

FndrFlareHdwKt

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• OE Style
• Direct Fit
• Rubber
• Eliminates Rattling; Wind Noise; Water Damage

This true Rock Crawling design puts protection tight up under the side of your Jeep while adding a special side hoop to block those large outcroppings. Special no drill frame mounted design provides secure, bounce-free installation while keeping the mount

Product Features:

• Black Powder Coated
• Protects Rocker Panels
• Installs w/ Existing Hardware
• Maintains Ground Clearance
• Limited 5 Year Warranty

Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

Interior Panel Retai

Rivet; Fender Liner;

Spare Tire Carrier B

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Plastic Construction
• Meets Quality Standards
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy To Install

This floor support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – this floor channel repair kit installs in place over the damaged section of the bodywork without the need to fabricate a repair piece
• Ready to install – this repair panel is pre-formed for a precise fit and is finished in weldable primer for a clean installation
• Application specific – made to match the dimensions and material for certain Jeep Wrangler application
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

New Standard Replacement Passenger Side Rear Fender Flare, Smooth, Paint To Match

Product Features:

• Smooth, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Protect your spare tire from sun’s rays with this heavy-duty Spare Tire Cover, available in a wide range of colors and sizes to suit your needs.

Product Features:

• Protects Spare Tire From Suns Rays
• Heavy Duty Denim Soft Top Material
• Elastic Strap to Insure Snug Fit

This frame repair kit offers a cost-effective way to repair a rusted or damaged chassis frame, rather than replacing the entire frame.

Product Features:

• Cost-effective fix – this chassis frame repair kit allows you to replace a rusted frame section
• Improved design – re-engineered with improved drainage to prevent future corrosion buildup
• Durably engineered – built with heavy-gauge steel and finished in weldable primer to resist future corrosion
• Direct fit – includes all OE hardware mounting positions for complete installation

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Classic Diamond Style Design
• Protected By A BriteGard Powder Coat Finish
• Compliment Brite-Tread Running Boards

LiftgateSeal

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1987-1995 Wrangler, Torx Head Dash Bolt
• 1976-1983 CJ5, 1976-1986 CJ7, 1981-1986 CJ8, Torx Head Dash Bolt
• 1972-1975 CJ5 & CJ6, Torx Head Dash Bolt

Screw; Spare Tire Ca