1998 Jeep Wrangler Bodies and Fender Parts

Rivet; Fender Liner; 97-01 Jeep XJ/TJ

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

New CAPA Certified Standard Replacement Driver Side Fender Splash Shield, With Aluminum Pin

Product Features:

• With Aluminum Pin, Made Of High Density Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Stylish and durable, Westin’s Wrangler JK Rear Inner Fenders provide protection from rocks and debris. Designed to fit with Westin’s Rear Tube Fenders and made of 16 gauge steel. Sold in pairs and available in textured black finish. Hardware included for easy installation

Product Features:

• Made Of 16 Gauge Steel
• Mesh Covered Openings To Provide Engine Compartment Ventilation
• Protection From Rocks And Debris
• Designed To Fit With West ins Front Tube Fenders
• Sold In Pairs
• Textured Black Finish
• Hardware Included
• Bolt-On Installation; No Drilling Required

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

On certain Jeep Wrangler vehicles, repairing a center left frame rail that’s rusted, cracked or failing to the point where it is jeopardizing the integrity of the entire frame can be time-consuming and require special skills. Typically, the repair or replacement requires precise measurement and custom fabrication of a replacement, or attempting to find and install a usable replacement section from a salvage yard. Buying a whole new frame from the dealer is not a viable or cost-effective option. This Dorman OE FIX frame rail enables a simpler repair by a technician or a skilled vehicle owner of just the damaged section. It is manufactured from rugged material and engineered for a precise fit and a predictable installation on specified Wranglers.

Product Features:

• Cost-effective – this replacement frame rail allows a technician or skilled vehicle owner to repair a damaged factory rail instead of performing a potentially less reliable or more costly repair
• Better repair – eliminates the need for precise measurement and custom fabrication of a replacement, or attempting to find and install usable and reliable frame section from a salvage yard
• Location- specific – this part is designed to replace an original equipment center left frame rail on specified Jeep Wrangler vehicles
• Improved design – manufactured from heavy gauge steel and engineered with improved drainage to prevent future corrosion buildup

Allows you to mount up to a 35 tire on your 1976-2006 XHD Rear Bumper.

Product Features:

• Textured Black
• Carry Up To a 35 in. Tire
• Modular Design
• 5 x 4.5 Bolt Pattern
• Bolt-on

Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge’s Side Armor. Built from heavy-duty 2 x 0.120 inch black texture powder coated steel tubing, these guards will take the beating that was meant for your body sheet metal.

Product Features:

• Textured Black
• Pair

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Constructed From Rubber
• Restore The Quality, Control, And Feel You Are Used To With Crown Automotive Body Mount Bushings
• Right Choice For Frame-Off Restorations
• OE Design For Easy Installation And Material Strength

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Screw; Spare Tire Carrier Mounting; 87-06 Wrangler

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Jeep Wrangler (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

When the floor channel rusts at the body mounts on certain Jeep Wranglers, the only repair option has been to fabricate a repair piece. This Dorman OE FIX kit is a convenient time-saving solution that welds in place over the damaged section.

Product Features:

• Saves time – this floor channel repair kit installs in place over the damaged section of the bodywork without the need to fabricate a repair piece
• Ready to install – this repair panel is pre-formed for a precise fit and is finished in weldable primer for a clean installation
• Application specific – made to match the dimensions and material for certain Jeep Wrangler application
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Constructed From Plastic
• Hazardous Free Material
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy To Install

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Offering Quality Replacement Parts
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
• Offers OE Fit And Function
• Easy To Install

Spartacus Heavy Duty Tire Carrier Wheel Mount; 87-06 Wrangler YJ/TJ

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Constructed From Steel And Rubber
• Offers OE Fit And Function
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
• Long-Lasting, Durable Crown Automotive Products

FenderSeal

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is . Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Made In USA

Spartacus HD Tire Ca

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Textured Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Provides Moderate Protection Against Road Hazards And Debris

The WeatherTech Mud Flap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech Mud Flap will offer undeniable vehicle protection.

Product Features:

• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Feature The Patented QuickTurn Hardened Stainless Steel Fastening System
• Mud Flap Will Offer Undeniable Vehicle Protection
• No Drilling Required

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Crown Automotive Is The Premiere Manufacturer And Distributor Of Quality Replacement Parts
• Hazardous Free Material
• Offers OE Fit And Function
• Easy To Install

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Textured Black Finish
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Get a high quality ignition tune up kit from Omix-ADA to get your Jeep running smooth again.

Product Features:

• Full Kit
• OE Style
• Direct Fit

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
• Quality material – this retainer is made of durable material for long-lasting service.
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost