1998 GMC K1500 Performance and Racing Products

Essential Performance and Racing Products for 1998 GMC K1500s

Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)

Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet

from

$1009.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 64cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (Part No.57-3013-2)

Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4)

Tst GM 87-95 5.0/5.7L Tbi

from

$224.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Complete Super Tune Kit
  • 8mm Spiral Core Wires
  • Accel Classic Core Plugs
  • High Performance Cap And Rotor
  • Reduced Emissions
See More

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

PERFORMANCE VALVE COVER GASKET SET

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Coil; GM External HEI Coil; High Performance

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for GM dual connector coil
  • 100:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)

Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair

from

$82.99


Product Features:
  • Mounts Standard Flange Holley Carbs Sideways
  • Use on Tunnel Rams
  • 0.550 in. Thick
See More

Hurst – Manual Shifter, Competition Plus Shifter (Part No.3910002)

Manual Shifter, Competition Plus Shifter

from

$534.99
The Hurst Competition Plus, the industry standard for over 30 years, used in dedicated applications to assure a custom fit to a wide variety of vehicles having factory consoles without any modifications.

Product Features:
  • High Ratio Pivot Mechanism
  • Adjustable Bias Spring Loads
  • Adjustable Stops
  • Chrome Plated Steel Bolt On Stick
  • Easy Installation
See More

B & M – Holeshot 2400 (Part No.70419)

Holeshot 2400

from

$609.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
  • New Turbine Hub
  • New Springs/Rollers In Stator
See More

Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)

High Performance Transmission Mount for Street & Racing Vehicles

from

$41.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Flowtech – Ceramic Header (Part No.31506FLT)

Ceramic Header

from

$499.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Withstands Intense Exhaust Heat
  • Reusable header, exhaust manifold and collector flange gaskets
  • Resists Deteriorating
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Easy Removal For Disassembly
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

Dynomax – Exhaust Tail Pipe (Part No.54022)

Exhaust Tail Pipe

from

$52.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15602)

Street Series Cat-Back Performance Exhaust System

from

$846.99
The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2105R)

Leaf Spring Bushing Set

from

$67.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – Hyper-Flex System (Part No.3.18104R)

Hyper-Flex System

from

$359.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5180G)

Sway Bar Bushing Set

from

$44.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Richmond Gear – Differential Ring And Pinion (Part No.GM85373)

Differential Ring And Pinion

from

$231.99
Excel’s broad line of original equipment automotive and light truck/SUV replacement ring & pinion gears, axles, and installation kits offer Richmond’s high OEM quality at affordable prices. The Excel product line covers the most popular vehicles on the road today.

Product Features:
  • Richmond Gear’s EXCel drivetrain products offer high-quality OEM replacement drivetrain products for your vehicle.
  • Richmond Gear’s EXCel line of ring & pinon gearsets provide Richmond quality at affordable prices.
  • EXCel offers a broad line of ring and pinion gears, installation kits, and axle shafts to match most vehicles that are on the road today.
  • EXCel drivetrain products are engineered to exceed OEM specifications by manufacturing to precise specifications in world-class factories, using the latest heat treatment technology, with extensive quality controls throughout.
  • All EXCel drivetrain products are backed by our one year warranty.
See More

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Transpak For 65-87 TH400 Transmission

from

$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:
  • Recalibrate Auto. Transmission
  • Optimum Performance
  • Select Your App. Mode
  • Improves Transmission Life
  • Trans. Removal Not Required
  • Downshift At Any Speed
  • Great For Trailer Towing
  • For Heavy Loads Driving Downhill
See More

Powertrax – Lock Right Locker (Part No.1910-LR)

Lock Right Locker

from

$376.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)

    Lower Intake Manifold Gasket Set: 9 Piece Set

    from

    $27.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel, 18" L, 3" In, 3" Out, Round (Part No.17698)

    Super Turbo Muffler Universal Fit Aluminized Steel, 18" L, 3" In, 3" Out, Round

    from

    $115.99
    DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

    Product Features:
    • Large internal flow tubes improve exhaust flow and reduce backpressure
    • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
    • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
    • Dyno proven to flow up to 700 SCFM
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1796)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $99.99
    K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
    • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
    • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
    See More

    Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)

    Eclipse; Large Hood Scoops

    from

    $123.99
    LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

    Product Features:
    • Unique, stylized hood scoops for trucks and cars
    • Transform stock hood into a simulated performance hood
    • Can easily be painted to match any factory color
    See More

    Upgrade your 1998 GMC K1500 with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1998 GMC K1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your K1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 64 Performance and Racing Products for the 1998 GMC K1500, designed to meet your needs without breaking the bank. From Performance Distributor replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 GMC K1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $889.99, with an average price of $240.17. Our 64 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1998 GMC K1500 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 GMC K1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like Dynomax, FEL-PRO Performance, Energy Suspension, and more. Dynomax Performance and Racing Products start at just $52.99 and boast an impressive 4 stars average rating from customers. FEL-PRO Performance and Energy Suspension also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 604 customer reviews and counting, our 1998 GMC K1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 GMC K1500 is always ready to roll. We’re committed to providing you with everything you need to keep your K1500 in top shape, all in one place. Start shopping confidently below for your 1998 GMC K1500!

    Best-Selling Performance Distributors for 1998 GMC K1500s

    Enhance the driving experience in your GMC with 1 quality Performance Distributor components, starting at $236.99.

    Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)

    Tst GM 96-00 5.0/5.7L Vortech

    from

    $236.99
    Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

    Product Features:
    • Complete Super Tune Kit
    • 8mm Spiral Core Wires
    • Accel Classic Core Plugs
    • High Performance Cap And Rotor
    • Reduced Emissions
    See More

    Most Popular 1998 GMC K1500 Performance Exhaust Products

    Customize your GMC with 15 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust Manifold Gaskets, and Performance Exhaust Headers, all priced under $846.99.

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

    Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval

    from

    $102.99
    DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
    See More

    Dynomax – Exhaust Tail Pipe (Part No.54022)

    Exhaust Tail Pipe

    from

    $52.99
    Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
    • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
    • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    See More

    MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15602)

    Street Series Cat-Back Performance Exhaust System

    from

    $846.99
    The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound.

    Product Features:
    • Dyno-proven performance
    • Durable corrosion-resistant stainless steel construction
    • CNC precision robotic manufacturing techniques
    See More

    Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)

    40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound

    from

    $99.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17519)

    Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval

    from

    $118.99
    DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • Polished finish for a show quality shine
    • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    See More

    Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval (Part No.17674)

    Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval

    from

    $89.99
    DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

    Product Features:
    • Large internal flow tubes improve exhaust flow and reduce backpressure
    • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
    • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
    • Dyno proven to flow up to 700 SCFM
    See More

    Flowtech – Shorty; Smog Headers (Part No.91832FLT)

    Shorty; Smog Headers

    from

    $325.99


    Product Features:
    • Bolt On Quickly And Easily
    • Top Performance/Clean Machine
    • Increased Efficiency
    • Leak Free Seal
    • Connects To Exhaust Head Pipe
    • Complete With Premium Gaskets
    • 16-Gauge Tubing For Durability
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17228)

    Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval

    from

    $156.99
    DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
    See More

    Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

    Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

    Exhaust Manifold Gasket Set

    from

    $27.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

    50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound

    from

    $185.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

    Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound

    from

    $206.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

    Product Features:
    • Mild to stock exterior exhaust tone
    • Minimal interior resonance
    • Excellent choice for large displacement vehicles
    • Improved horsepower, torque and potential mileage improvement
    See More

    Dynomax – Exhaust Tail Pipe (Part No.54021)

    Exhaust Tail Pipe

    from

    $52.99
    Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
    • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
    • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17289)

    Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval

    from

    $204.99
    DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • Polished finish for a show quality shine
    • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    See More

    Top Picks for 1998 GMC K1500 Performance Ignition Products

    Upgrade GMC K1500s with top-quality Performance Ignition Products parts, including 5 OEM and aftermarket selections for your 1998 model.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)

    Eclipse; Large Hood Scoops

    from

    $123.99
    LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

    Product Features:
    • Unique, stylized hood scoops for trucks and cars
    • Transform stock hood into a simulated performance hood
    • Can easily be painted to match any factory color
    See More

    Auto Ventshade (AVS) – Carflector®, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.20004)

    Carflector®, Hood Protector, Smoke, Low Profile, 1 Pc

    from

    $69.99
    The AVS Carflector® hood shield is custom molded with precision engineering to fit cars, CUVs, and SUVs. The AVS Carflector has a medium profile wrap design to provide excellent protection from road debris for the hood, fenders, and windshield. Off-the-hood design makes it easy for cleaning as well as car-wash safe. Easy to install by attaching with 3M(TM) automotive-grade adhesive or mechanical fasteners. Comes with a limited lifetime warranty. Whatever you drive, AVS has the variety of hoodshield styles to suite your design preferences and vehicle style.

    Product Features:
    • Provides deflection to protect hood, fenders, and windshield
    • Medium profile, wrap-around design for Cars and CUVs
    • Off-the-hood design allows for easy cleaning and waxing
    • Durable, impact-resistant acrylic construction
    • Available in dark smoke finish
    • Easy, no-drill installation
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    In-Demand Performance Engines for 1998 GMC K1500s

    Select from 15 premium Performance Engines parts for your 1998 GMC K1500, with prices ranging from $20.29 to $889.99.

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

    Engine Valve Cover Gasket Set

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Mr. Gasket – Intake Gasket (Part No.136G)

    Intake Gasket

    from

    $43.99
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Die-cut for an excellent fit
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More

    Edelbrock – Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262 (Part No.7209)

    Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262

    from

    $27.99
    Edelbrock part #7209 Intake Gaskets for 1985-1995, Chevy V6 200-229-262 (3.8 and 4.3L) allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-

    Product Features:
    • 1.28″x2.10″
    • Stock Port Style
    • .060″ Thick
    • Multi Piece Configuration
    • Composite Material
    See More

    FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

    Engine Timing Cover Gasket

    from

    $20.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Steel core gasket construction
    • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – E-Tec-170 Small-Block Chevy Cylinder Head Flat Tappet Polished (Part No.609719)

    E-Tec-170 Small-Block Chevy Cylinder Head Flat Tappet Polished

    from

    $889.99
    The Edelbrock #609719 E-Tec Cylinder Heads are replacements for 302, 327, 350 & 400 c.i.d. S/B Chevy engines with “Vortec-style” manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance. A uniqu
    See More

    B & M – Holeshot 2400 (Part No.70441)

    Holeshot 2400

    from

    $709.99
    Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    Edelbrock – Engine Cylinder Head (Part No.60959)

    Engine Cylinder Head

    from

    $616.99


    Product Features:
    • 170cc Intake 64cc Chamber for Vortec-Style Intake
    • 20% Inc Flow Over Cast-Iron Vortec Heads
    • Accept Standard or Center-Bolt Valve Covers
    • Hand-Blended Intake and Exhaust Bowls
    • Heli-Coils in Rocker Studs and Exhaust Bolt Holes
    See More

    B & M – Holeshot 2400 (Part No.70419)

    Holeshot 2400

    from

    $609.99
    HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    • New Turbine Hub
    • New Springs/Rollers In Stator
    See More

    B & M – Torque Converter, Holeshot 2000 (Part No.70417)

    Torque Converter, Holeshot 2000

    from

    $544.99
    The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    Mr. Gasket – Intake Bolt Kit (Part No.5003)

    Intake Bolt Kit

    from

    $75.99
    Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

    Product Features:
    • Chrome plated
    • Grade 8
    • 12-point head
    • AN washers with no exposed shoulder for a professional appearance
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    Most Sold 1998 GMC K1500 Performance Air Filters

    Explore our best-selling GMC parts for the 1998 K1500 among 1 OEM and aftermarket options starting from $99.99.

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1796)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $99.99
    K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
    • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
    • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
    See More

    Top-Rated Performance and Racing Products Brands For Your 1998 GMC K1500

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 GMC K1500s. Below you’ll find some of our best rated Performance and Racing Products from Dynomax, FEL-PRO Performance, and Energy Suspension, and more. Performance and Racing Products from these brands that fit a 1998 K1500 start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Dynomax 1998 GMC K1500 Performance and Racing Products

    When it comes to maintaining or upgrading your 1998 GMC K1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Dynomax ticks all of those boxes. We offer a wide selection of Dynomax Performance and Racing Products, specifically designed for the 1998 GMC K1500. With over 7 Dynomax brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $52.99, with an average price of just $111.42. Plus, with over 6 customer reviews and an average rating of 4 stars, you can trust that our Dynomax Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Exhaust Tail Pipe
    from
    $52.99
    This product is not rated

    Exhaust Tail Pipe

    “”

    Popular FEL-PRO Performance 1998 GMC K1500 Performance and Racing Products

    FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 GMC K1500 owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1998 K1500, Advance Auto Parts carries a full inventory of 8 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $20.29 to $52.99, plus, with more than 6 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
    from
    $39.49
    This product is not rated

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    “”

    Exhaust Manifold Gasket Set
    from
    $27.49
    This product is not rated

    Exhaust Manifold Gasket Set

    “”

    Engine Timing Cover Gasket
    from
    $20.29
    This product is not rated

    Engine Timing Cover Gasket

    “”

    FAQs for 1998 GMC K1500 Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1998 GMC K1500s?

    Out of 64 Performance and Racing Products that fit 1998 GMC K1500s, the following parts are the top sellers:

    What’s the price range for 1998 GMC K1500 Performance and Racing Products?

    Performance and Racing Product prices for the 1998 GMC K1500 start at $9.99 and go up to $889.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1998 GMC K1500?

    The average price for Performance and Racing Products for the 1998 GMC K1500 is $240.17. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other GMC K1500 model years?

    Yes, we currently carry Performance and Racing Products for 19 model years of GMC K1500s between 1979 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1997, 1996, 1995, 1994, 1993, 1992, 1991, and 1990.

    What are the cheapest Performance and Racing Products for my 1998 GMC K1500?

    The cheapest 1998 GMC K1500 Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1998 GMC K1500?

    Out of 604 reviews by customers, our 1998 GMC K1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 GMC K1500 and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1998 GMC K1500?

    Can I get help with 1998 GMC K1500 Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

    What is your return policy for GMC K1500 Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new GMC K1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.