from

$43.49

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$89.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$7.49

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$44.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$68.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$35.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$22.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

from

$24.49

Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.

Product Features:

Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models
Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$7.56

The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$98.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$83.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$83.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$103.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:

These coils provide the exact spark timing that helps maximize the engine and emissions performance
RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
Engineered to help withstand temperature extremes
Internal insulation displacement connection is helps make high-reliability internal connections
Interior insulation helps ensure no internal arcing
Right fit for each application; helps provide ease of installation and removal
High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
Housings engineered to help resist cracking in the most extreme conditions
Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

from

$109.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$102.89

Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:

Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
Radio-Frequency Interference (RFI) Suppression
Magnets hold strength for the coil to maintain proper energy output
Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
Coil Housing is engineered to withstand extremes in temperature without cracking

from

$37.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$251.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$89.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$31.99

This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.49

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$46.49

BWD is an aftermarket leader, providing a premium line of engine management products. We are constantly evolving to give BWD customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes

from

$17.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$70.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.29

This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

1998 Ford Taurus Ignition Coils and Boots

More 1998 Ford Taurus Ignition Coils and Boots

Essential 1998 Ford Taurus Ignition Coils and Boots

NGK – NGK Wire Set (Part No.52076)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7102)

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6089)

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6260)

DENSO – Coil On Plug Boots-6 (Part No.671-6236)

DENSO – COP BOOTS (Part No.671-4325)

Dorman – Help – Spark Plug Boot (Part No.49818)

Motorcraft – Direct Ignition Coil Boot (Part No.F3006374064MTR)

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48768)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26E1066)

Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1051)

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-532)

Delphi – IGNITION COIL (Part No.GN10300)

Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005419827MTR)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1022)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1477-6)

Driveworks – Ignition Coil (Part No.26324)

Dorman – Ignition Coil Connector (Part No.645-155)

Carquest – Air Charge Temperature Sensor Connector (Part No.PT5749)

Carquest – Ignition Coil Connector (Part No.PT2268)

Carquest – Ignition Coil Connector (Part No.PT753)

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA3066)

Dorman – Electrical Harness – 3-Wire Ignition Coil (Part No.85121)

Carquest Premium – Ignition Coil Connector (Part No.PTA1082)

Popular 1998 Ford Taurus Ignition Coils and Boots Categories

1998 Ford Taurus Ignition Coils and Boots

Ignition Coils and Boots Brands To Make Your 1998 Ford Taurus Last

Popular Carquest Ignition Coils and Boots

FAQs for 1998 Ford Taurus Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 1998 Ford Taurus?

What are the top-rated 1998 Ford Taurus Ignition Coils and Boots?

More Popular Parts for All Makes