1998 Ford F-250 Ignition Coils and Boots
More 1998 Ford F-250 Ignition Coils and Boots
Find your specific 1998 Ford F-250 original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1998 Ford F-250 Ignition Coils and Boots
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8193)
from
$35.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
MSD Ignition – Wire Set; Super Conductor; Ford 351M-400; HEI (Part No.31339)
from
$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
NGK – Coil on Plug Boot (Part No.58901)
from
$6.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8100)
from
$129.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Spark Plug Wire Set: Carbon Core, 10 Wire Set (Part No.671-8074)
from
$74.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8095)
from
$101.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Coil On Plug Boots-8 (Part No.671-8110)
from
$62.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Carquest – Ignition Coil Connector (Part No.PT753)
from
$17.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest – Air Charge Temperature Sensor Connector (Part No.PT5749)
from
$27.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Ignition Coil Connector (Part No.PTA1082)
from
$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Coil Connector (Part No.PTC1111)
from
$7.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Coil Connector (Part No.PTA1175)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest – Ignition Coil Connector (Part No.PT5764)
from
$10.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
E3 – High Output Ford 2-Valve Coil (Part No.E3.624)
from
$29.99
With more than double the energy output of a stock coil, E3s new 2 Valve coil features a stainless steel spark plug contact ring with a ferrite lug to suppress EMI/ RFI noise. Designed to work with the factory DIS electronic controls as well as high performance aftermarket ignition systems, the resistance and inductance values have been optimized to increase output at high RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Fits the 1997 to 2013 2 Valve Ford engines.
Product Features:
See More
Product Features:
- Designed to work with factory DIS electronic ignition systems
- High temperature epoxy provides excellent thermal conductivity and long life
- Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
- Fits 1997-2013 2-Valve Ford engines
- Crosses to MSD 8248
ACDelco – Ignition Coil (Part No.U505)
from
$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48688)
from
$79.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)
from
$77.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Fd-478
- MSD 5527
- Standard Motor Products SMP Fd-478
- MSD 5527
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Driveworks – Electronic Ignition Coil (Part No.26286)
from
$36.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Accel – High-Performance Ignition Coils for Ford 2-Valve Engines (Part No.140032)
from
$24.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct improved performance replacements for OEM coils.
Product Features:
See More
Product Features:
- Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
- Advanced Bobbin Technology
- Direct Plug In Replacement results in a Direct OE Fit
- OBD ll Safe, so you won’t be throwing codes, just sparks
- Standard Motor Products SMP Fd-503
- MSD 8242 82428
- Resists Shock And Vibration
- Resists Corrosion
Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-508)
from
$80.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Product Features:
See More
Product Features:
- These coils provide the exact spark timing that helps maximize the engine and emissions performance
- RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
- Engineered to help withstand temperature extremes
- Internal insulation displacement connection is helps make high-reliability internal connections
- Interior insulation helps ensure no internal arcing
- Right fit for each application; helps provide ease of installation and removal
- High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
- Housings engineered to help resist cracking in the most extreme conditions
- Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1829)
from
$37.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil (Part No.E5)
from
$23.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1073)
from
$17.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
PerTronix – Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 8 ea, OE Replacement (Part No.30728)
from
$242.99
Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.
Product Features:
See More
Product Features:
- 30,000 Volts. Direct OEM replacement.
- Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
- Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
- Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1001)
from
$55.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
MSD Ignition – Coil; Ford 4.6/5.4L 2-Valve 98-14 Single (Part No.8242)
from
$54.39
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 1999-2004 4.6L And 5.4L SOHC 2V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- CARB approved legal for use in all states
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6000)
from
$79.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Popular 1998 Ford F-250 Ignition Coils and Boots Categories
1998 Ford F-250 Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1998 Ford F-250. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 33 different Ignition Coils and Boots in our inventory ranging from $6.79 to $299.99. That means you can find the exact parts or products you need to keep that 1998 Ford F-250 running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Ford F-250. Carquest, Driveworks, and Motorcraft are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1998 Ford F-250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,275 reviews in this category, some of the top rated parts include High-Performance Ignition Coils for Ford 2-Valve Engines with 4.4 stars and Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 8 ea, OE Replacement with 4.7 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1998 Ford F-250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1998 Ford F-250 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Ford F-250 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Ignition Coils and Boots
We carry Carquest parts in our stock across Ignition Coil Connectors categories, plus more. For a 1998 Ford F-250, our most popular Carquest Ignition Coils and Boots include:
Top 1998 Ford F-250 Ignition Coils and Boots from Driveworks
Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 1998 Ford F-250. Popular Driveworks parts include:
FAQs for 1998 Ford F-250 Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1998 Ford F-250?
Out of 33 Ignition Coils and Boots for the 1998 Ford F-250, the most popular in our inventory are:
from
$55.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$80.99
(118)
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$35.99
(51)
Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 1 ea, OE Replacement
Ignition Coils
What are the top-rated 1998 Ford F-250 Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 1998 Ford F-250 based on customer reviews/ratings are:
from
$24.99
(82)
High-Performance Ignition Coils for Ford 2-Valve Engines
“Ordered the part online. Was ready quickly and fixed my problem spot on.”
from
$242.99
(53)
Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 8 ea, OE Replacement
“Work perfectly in a 2010 Crown Vic.”
from
$209.99
(3)
Coils; Street Fire; Ford 4.6/5.4L 2-Valve 98-14 8-Pack
“I bought these to fix skipping and hesitation issue. Been in my truck 2 years about 12000 miles without issue. Hunting truck gets worse hard in those ”
