from

$79.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$30.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$91.89

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$25.90

Drive Belt

from

$21.29

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$14.99

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$47.49

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$29.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$18.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$37.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$25.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$32.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$31.49

This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material and tolerances, specifications and meets performance and durability requirements. The Litens replacement part is constructed of heavy duty steel for long life and trouble free performance Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Heavy Duty Steel Pulley
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$27.99

This windshield washer hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this windshield washer hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$41.49

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$13.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.79

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$137.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$10.29

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$183.87

The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:

Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
Always application specific – no one-size-fits-all solution
Feature a cast-aluminum spring case and arm to resist cracking and fatigue
Sealed-for-life bearing helps provide long service life
Meets Motorcraft 10-year/150,000-mile durability specifications
Designed to perform in harsh underhood environment
Easy to install
Recommended by Ford Motor Company

from

$54.99

This Litens aftermarket part is designed and engineered by one of the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Ford/Mercury’s original form, fit, and function specifications. The Litens design includes a tensioner arm “lift-lug” for easy belt removal and installation. A molded location pin on the base ensures precise installation. Choosing The Correct Replacement Part: The Litens aftermarket tensioner use a round spring versus a flat spring and is marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$111.99

Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:

Custom engineered to cover 35 million problem drive vehicles in operation
Designed as an improvement over OE to address problematic drive systems
Features a specially designed serpentine belt with specific compounds that mitigate noise

from

$58.99

Product Features:

Designed for the replacement of worn or damaged serpentine belts, idler pulleys, and/or tensioners
Contains Dayco’s W Profile belt, the solution to troublesome drive problems
This kit takes the complexity out of finding all the parts needed
Contains multilingual kit specific information and alignment tips

from

$54.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$44.98

The Motorcraft PCV Hose is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$23.91

The Motorcraft PCV Hose is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$16.12

Provide an airtight seal between PCV hoses and prevent vacuum leaks with Dorman’s resilient PCV Elbows. Made from nylon, rubber or plastic, the elbows are durable against fluctuating under hood temperatures. They are excellent for the repair of emission and vacuum systems on cars, trucks and tractors.

Product Features:

Made from oil-resistant materials
Easy to install – just press into place
Direct replacement for a proper fit every time
Resilient construction resists brittleness and cracking

1998 Ford Taurus Belts and Hoses

More 1998 Ford Taurus Belts and Hoses Categories

Essential 1998 Ford Taurus Belts and Hoses

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 82 mm Diameter, 26 mm Smooth (Part No.89010)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578667ACD)

Bando – Drive Belt (Part No.W100081297BAN)

Gates – Premium Molded Coolant Hose (Part No.21738)

Gates – Premium Molded Heater Hose (Part No.18020)

Dorman – Fuel Filler Neck Hose (Part No.573-060)

Gates – Premium Modular Coolant Hose (Part No.23643)

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25478)

Dayco – Poly Rib Belt Serpentine Belt; 100.59 Long, 6 Rib Count (Part No.5061005)

Dayco – Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (Part No.4PK932EE)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38006)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 82 mm Diameter (Part No.900025A)

Dorman – Windshield Washer Hose (Part No.924-250)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.75" Long, .63" Diameter (Part No.B71414)

Dorman – Molded Heater Hose: Steel (Part No.626-535)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.13" Long, 1.50" Diameter (Part No.B71381)

Gates – Premium Molded Coolant Hose (Part No.22363)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.5" Long, 1.25" Diameter (Part No.E72336)

Gates – Premium Molded Coolant Hose (Part No.21712)

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001411648MTR)

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999022A)

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60855K1)

Dayco – Serpentine Belt Tensioner Kit: With Belt and Tensioner, 2 Pieces (Part No.5030268K1)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5060815K1)

Motorcraft – PCV Hose (Part No.B2150671618MTR)

Motorcraft – PCV Hose (Part No.B2150671553MTR)

Dorman – PCV Elbow (Part No.B2200691034DOR)

Popular 1998 Ford Taurus Belts and Hoses Categories

1998 Ford Taurus Belts and Hoses

Top-Rated Belts and Hoses Brands For Your 1998 Ford Taurus

Popular Litens Belts and Hoses

Top-Rated Dayco Belts and Hoses

FAQs for 1998 Ford Taurus Belts and Hoses

What are the most purchased Belts and Hoses for the 1998 Ford Taurus?

What are the top-rated 1998 Ford Taurus Belts and Hoses?

More Popular Parts for All Makes