1998 Ford F-150 Steering and Chassis Parts
More 1998 Ford F-150 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1998 Ford F-150, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1998 Ford F-150 Steering and Chassis Parts
MOOG – Torsion Bar Load Kit (Part No.T40016)
from
$181.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High quality construction
- Saves time on installation
- For both professionals and DIYers
- Designed for use on cars and light trucks
- Incorporates proven design and engineering features
PWR – New Power Steering Pump with Pulley (Part No.60-6701P)
from
$254.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
- Enables you to achieve a more efficient, durable, and professional installation
Lares – Remanufactured Power Steering Gear Box (Part No.1446)
from
$186.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Carquest Premium – Idler Arm (Part No.620-65375)
from
$116.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)
from
$4.49
This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG – Caster/Camber Adjusting Kit (Part No.K100025)
from
$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
National – Multi Purpose Seal (Part No.710828)
from
$26.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
MOOG – Tie Rod End (Part No.ES3370T)
from
$67.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Camber Bolt Kit (Part No.DW-K8740)
from
$23.29
Camber Bolt Kit
MOOG – Ball Joint (Part No.K8412T)
from
$67.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Dorman – Power Steering Pump Pulley (Part No.300-006)
from
$46.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Pressure Hose Assembly (Part No.36406)
from
$42.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Alignment Caster / Camber Bushing (Part No.K8960)
from
$32.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Allows adjustment range from negative 1/2 to 1/2 Degrees
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG – Stabilizer Bar Link (Part No.K80337)
from
$53.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® INNOVATION — Combines the best features of socket-style and bolt-style sway bar links
- EASY TO INSTALL — Stop-out design minimizes sensitivity to installation torque and molded bushings hold coated washers in place for easy installation
- KEEPS DIRT AND WATER OUT — Integral boot shields components from wear-causing
- DURABILITY — With the nut seated fully against the stop, the bushings are ideally preloaded to provide excellent durability
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Dorman – Lower Steering Shaft (Part No.425-331)
from
$236.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
National – Multi Purpose Seal (Part No.471645)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
MOOG – Rack & Pinion Bellows Kit (Part No.K150291)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Carquest Premium – Control Arm with Ball Joint (Part No.820-98218B)
from
$281.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Hardware included for easier installation
MOOG – Torsion Bar Key (Part No.K100014)
from
$278.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Allows adjustment range from 1/2 to 1 1/2
- Restores ride height to be within OE specifications for vehicles with a fatigued torsion bar
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Dorman – Help – Power Steering Reservoir Caps (Part No.82726)
from
$20.29
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Powercraft – Steering Gear Major Seal Kit (Part No.8897)
from
$66.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Suspension Ball Joint (Part No.DW-K80026HD)
from
$19.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Driveworks – Tie Rod End (Part No.DW-ES2079S)
from
$24.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Corteco – Power Steering Pump Repair Kit (Part No.M2040290620CFW)
from
$18.33
Power Steering Pump Repair Kit
Skyjacker – Repl Stab: White W/Red Boot (Part No.7800)
from
$75.99
Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment
Product Features:
See More
Product Features:
- Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
- Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
- Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
- Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
- Reduce Physical Strength Handling Larger Tires
- No Hardware Included
- Replacement Cylinder Only
Popular 1998 Ford F-150 Steering and Chassis Parts Categories
1998 Ford F-150 Steering and Chassis Parts
You count on your 1998 Ford F-150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 183 Steering and Chassis Parts ranging in price from $4.49 to $1,074.99, you’re sure to find everything you need for your 1998 Ford F-150.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 22 different brands like Driveworks, Moog, and Imperial. 1998 Ford F-150 Steering and Chassis Parts start as low as $4.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 9,963 extensive product reviews on 1998 Ford F-150 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 4.6 stars and Power Steering Oil Cooler with 3.7 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1998 Ford F-150 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1998 Ford F-150
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Ford F-150 running right for years to come. In our inventory you’ll find brands like Driveworks, Moog, Imperial, and even more.
Popular Powercraft Steering and Chassis Parts
You’ll find popular Powercraft brand products across Steering Shafts and Gear Boxes. All are waiting to get your 1998 Ford F-150 back on the road. Some of the top-rated Powercraft products in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1998 Ford F-150, and some of our most reviewed Driveworks parts include:
FAQs for 1998 Ford F-150 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1998 Ford F-150?
Out of 183 Steering and Chassis Parts for the 1998 Ford F-150, the most popular in our inventory are:
What are the top-rated 1998 Ford F-150 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1998 Ford F-150 based on customer reviews/ratings are:
