1998 Ford Explorer Performance and Racing Products

Find Your Specific 1998 Ford Explorer Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1998 Explorer. Advance Auto Parts has popular Explorer parts like Performance Exhaust Products, Performance Engines, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Explorer model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1998 Ford Explorer Performance and Racing Products below and start saving instantly.
Please Select your Vehicle to See Exact Fit Parts

Popular 1998 Ford Explorer Performance and Racing Products Categories

Computer Chip Programmers
Computer Chip Programmers
Performance Coils
Performance Coils
Performance Air Intake Kits
Performance Air Intake Kits
Performance Exhaust Mufflers
Performance Exhaust Mufflers
Engine Cold Air Intakes
Engine Cold Air Intakes
Performance Shifters
Performance Shifters
Performance Valve Covers
Performance Valve Covers
Performance Engine and Transmission Mounts
Performance Engine and Transmission Mounts
Performance Water Outlets
Performance Water Outlets
Performance Radiator Caps
Performance Radiator Caps
Performance Engine Camshaft and Lifter Kits
Performance Engine Camshaft and Lifter Kits
Performance Engine Harmonic Balancers
Performance Engine Harmonic Balancers
Performance Differential Covers
Performance Differential Covers
Performance Distributor Components
Performance Distributor Components
Performance Engine Intake Manifold Gaskets
Performance Engine Intake Manifold Gaskets
Performance Engine Valve Springs
Performance Engine Valve Springs
Performance Engine Valve Cover Gasket Sets
Performance Engine Valve Cover Gasket Sets
Performance Flywheel and Flexplates
Performance Flywheel and Flexplates
Performance Exhaust Manifold Gaskets
Performance Exhaust Manifold Gaskets
Performance Posi Units and Components
Performance Posi Units and Components
Performance Camshaft and Lifter Kits
Performance Camshaft and Lifter Kits
Performance Upper Performance Control Arm Bushings
Performance Upper Performance Control Arm Bushings
Performance Engine Rocker Arms
Performance Engine Rocker Arms
Performance Engine Camshafts
Performance Engine Camshafts
Performance Ring and Pinions
Performance Ring and Pinions
Performance Ignition Parts
Performance Ignition Parts
Performance Intake Manifold Hardware
Performance Intake Manifold Hardware
Performance Sway Bar Link Kits
Performance Sway Bar Link Kits
Performance Lower Control Arm Bushings
Performance Lower Control Arm Bushings
Performance Sway Bar Bushings
Performance Sway Bar Bushings
Performance Engine Main Bearing Gasket Sets
Performance Engine Main Bearing Gasket Sets
Performance Tie Rod End Boots
Performance Tie Rod End Boots
Performance Engine Push Rod Guideplates
Performance Engine Push Rod Guideplates
Performance Engine Push Rods
Performance Engine Push Rods
Performance Engine Valve Spring Retainer
Performance Engine Valve Spring Retainer

Essential Performance and Racing Products for 1998 Ford Explorers

Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

Pushrod Set for Small Block Ford 289-302

from

$221.99
Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More
View Product

Motive Gear – Differential Mini Spool (Part No.MS88-31)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL 8.8 FORD 31SPL
See More
View Product

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

from

$338.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

Mr. Gasket – Valve Cover (Part No.9804)

Valve Cover

from

$85.99
These valve covers are constructed of a heavy gauge steel that will also help to prevent leaks around sealing flanges. Sold as a pair.

Product Features:
  • Fits Ford small block
  • Chrome plated steel construction
  • Sold as a pair
  • Chrome Plated
See More

(1 reviews)
View Product

Accel – Coil:Ford Mod Eng 3-Valve (Part No.140033)

Coil:Ford Mod Eng 3-Valve

from

$27.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:
  • Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
  • Advanced Bobbin Technology
  • Direct Plug In Replacement results in a Direct OE Fit
  • OBD ll Safe, so you won’t be throwing codes, just sparks
  • Standard Motor Products SMP Fd-508
  • MSD 8243 82438
  • Resists Shock And Vibration
  • Resists Corrosion
See More

(10 reviews)
View Product

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-2528)

Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter

from

$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:
  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 60 minutes or less with simple hand tools
  • No-Hassle Lifetime Limited Warranty
  • Will not void vehicle warranty(limited)
See More

(2 reviews)
View Product

Mr. Gasket – Water Neck (Part No.2662)

Water Neck

from

$23.79
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:
  • Chrome Plated
  • This Is A 45 Degree Neck
  • Comes With O-ring And Bolts
  • Has Small Hose Fitting On It
See More

(12 reviews)
View Product

Energy Suspension – Control Arm Bushing Set (Part No.4.3157G)

Control Arm Bushing Set

from

$112.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More
View Product

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

Lower Intake Manifold Gasket Set: 11 Piece Set

from

$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

(4 reviews)
View Product

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$45.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More
View Product

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

Engine Valve Cover Gasket Set

from

$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
  • Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
  • Not intended for use in emission controlled vehicles.
See More

(1 reviews)
View Product

Motive Gear – Performance Differential Ring and Pinion (Part No.F888390)

Performance Differential Ring and Pinion

from

$262.99


Product Features:
  • FRD 10BLT 8.8 R/P 3.90 MGP
See More
View Product

Energy Suspension – Sway Bar Bushing Set (Part No.4.5155R)

Sway Bar Bushing Set

from

$58.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More
View Product

Energy Suspension – Sway Bar Bushing Set (Part No.4.5155G)

Sway Bar Bushing Set

from

$58.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More
View Product

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$106.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More
View Product

Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)

Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8

from

$440.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:
  • Designed for 2500 to 6500 Performance
  • Designed for Hi-Perf Street; Drag or Marine Use
  • Matched to Edelbrock Torker II Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

Energy Suspension – Control Arm Bushing Set (Part No.4.3157R)

Control Arm Bushing Set

from

$112.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More
View Product

Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound

from

$224.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Mild to stock exterior exhaust tone
  • Minimal interior resonance
  • Excellent choice for large displacement vehicles
  • Improved horsepower, torque and potential mileage improvement
See More
View Product

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$34.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More
View Product

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Thermocap Radiator Cap

from

$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More
View Product

Mr. Gasket – Differential Cover Kit (Part No.9893G)

Differential Cover Kit

from

$89.99
Made from heavy gauge steel, this chrome plated rear end cover comes complete with bolts and gaskets.

Product Features:
  • Chrome plated steel for looks
  • Includes bolts and gasket
See More
View Product

Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)

Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response

from

$399.99
The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.

Product Features:
  • Optimized engine tuning
  • Adjustable rev limiter/speed limiter
  • Speedometer correction for multiple tire sizes and gear ration changes
  • Adjustable shift firmness and shift points
  • Throttle adjustments
  • Cooling fan on/off temperatures
  • Return back to factory settings
  • Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
  • Internet updateable
See More
View Product

Energy Suspension – TransMt (Part No.4.1148G)

TransMt

from

$79.99
TransMt
View Product

K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.57-2573)

Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter

from

$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:
  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 60 minutes or less with simple hand tools
  • No-Hassle Lifetime Limited Warranty
  • Will not void vehicle warranty(limited)
See More

(2 reviews)
View Product

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-2539)

Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter

from

$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:
  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 60 minutes or less with simple hand tools
  • No-Hassle Lifetime Limited Warranty
  • Will not void vehicle warranty(limited)
See More
View Product

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

(1 reviews)
View Product

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More
View Product

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

(3 reviews)
View Product

Upgrade your 1998 Ford Explorer with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1998 Ford Explorer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Explorer functioning at its best. At Advance Auto Parts, we offer a wide selection of 72 Performance and Racing Products for the 1998 Ford Explorer, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 Ford Explorer at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $815.99, with an average price of $193.07. Our 72 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1998 Ford Explorer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Ford Explorer, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, FEL-PRO Performance, B & M, and more. K&N Performance and Racing Products start at just $367.99 and boast an impressive 4.8 stars average rating from customers. FEL-PRO Performance and B & M also bring quality to the table, with Performance and Racing Products available starting at $35.99, and at an average 4.2 stars rating. With 109 customer reviews and counting, our 1998 Ford Explorer Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Ford Explorer is always ready to roll. We’re committed to providing you with everything you need to keep your Explorer in top shape, all in one place. Start shopping confidently below for your 1998 Ford Explorer!

Best-Selling Performance Exhaust Products for 1998 Ford Explorers

Enhance the driving experience in your Ford with 6 quality Performance Exhaust Product components, starting at $39.99.
show more show less

Mr. Gasket – Aluminum Exhaust Gasket (Part No.7410G)

Aluminum Exhaust Gasket

from

$43.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Reusable header, exhaust manifold and collector flange gaskets
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

(1 reviews)
View Product

Flowmaster Inc. – 50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.524553)

50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound

from

$204.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

(2 reviews)
View Product

Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound

from

$224.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Mild to stock exterior exhaust tone
  • Minimal interior resonance
  • Excellent choice for large displacement vehicles
  • Improved horsepower, torque and potential mileage improvement
See More
View Product

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)

Exhaust Manifold Gasket Set

from

$45.99
Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)

Exhaust Manifold Gasket Set

from

$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

Exhaust Manifold Gasket Set

from

$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Most Popular 1998 Ford Explorer Performance Engines

Customize your Ford with 26 Performance Engines products like Performance Engine Intake Manifold Gaskets, Performance Engine Valve Cover Gasket Sets, and Performance Intake Manifold Hardware, all priced under $815.99.
show more show less

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

Lower Intake Manifold Gasket Set: 11 Piece Set

from

$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

(4 reviews)
View Product

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

Engine Valve Cover Gasket Set

from

$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
  • Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
  • Not intended for use in emission controlled vehicles.
See More

(1 reviews)
View Product

Mr. Gasket – Water Neck (Part No.2662)

Water Neck

from

$23.79
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:
  • Chrome Plated
  • This Is A 45 Degree Neck
  • Comes With O-ring And Bolts
  • Has Small Hose Fitting On It
See More

(12 reviews)
View Product

Mr. Gasket – Intake Manifold Bolts (Part No.958G)

Intake Manifold Bolts

from

$23.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers

Product Features:
  • Hex Head
  • Zinc Plated
  • Ideal For Minimal Space
  • 12-Point Head And Flange
  • Zinc Plated For Protection
See More

(1 reviews)
View Product

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST

from

$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:
  • Cost effective aluminum construction provides superior strength to weight ratio
  • Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
  • Durable design increases valve lift while withstanding the rigors of moderate race use
  • Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
See More

(1 reviews)
View Product

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$45.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More
View Product

Mr. Gasket – Valve Cover Gasket Set (Part No.276)

Valve Cover Gasket Set

from

$35.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More
View Product

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

from

$338.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

Competition Cams – High Energy 215/224 Hydraulic Roller Cam for Ford 4.0L 6 Cylinder (Part No.49-422-8)

High Energy 215/224 Hydraulic Roller Cam for Ford 4.0L 6 Cylinder

from

$815.99
High Energy 215/224 Hydraulic Roller Cam for Ford 4.0L 6 Cylinder
View Product

Competition Cams – High Energy 200/210 Hydraulic Roller Cam for Ford 4.0L 6 Cylinder (Part No.49-410-8)

High Energy 200/210 Hydraulic Roller Cam for Ford 4.0L 6 Cylinder

from

$815.99
High Energy 200/210 Hydraulic Roller Cam for Ford 4.0L 6 Cylinder
View Product

Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)

Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8

from

$440.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:
  • Designed for 2500 to 6500 Performance
  • Designed for Hi-Perf Street; Drag or Marine Use
  • Matched to Edelbrock Torker II Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

Competition Cams – 16 Springs (Part No.26986-16)

16 Springs

from

$401.99
16 Springs
View Product

Competition Cams – ENGINE ROCKER ARM (Part No.17045-16)

ENGINE ROCKER ARM

from

$301.99
ENGINE ROCKER ARM
View Product

Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

Pushrod Set for Small Block Ford 289-302

from

$221.99
Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More
View Product

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)

Performer Series Retainer (Qty 16)

from

$141.99
Product Features:
  • Use W/ Valve Springs Part #5722, 5796
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More
View Product

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$106.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More
View Product

Competition Cams – ENGINE ROCKER ARM (Part No.19049-1)

ENGINE ROCKER ARM

from

$59.99
ENGINE ROCKER ARM
View Product

Competition Cams – ENGINE ROCKER ARM (Part No.19048-1)

ENGINE ROCKER ARM

from

$56.99
ENGINE ROCKER ARM
View Product

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)

Engine Crankshaft Seal Kit

from

$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Competition Cams – ENGINE ROCKER ARM (Part No.19043-1)

ENGINE ROCKER ARM

from

$46.49
ENGINE ROCKER ARM
View Product

Competition Cams – ENGINE ROCKER ARM (Part No.17045-1)

ENGINE ROCKER ARM

from

$29.99
ENGINE ROCKER ARM
View Product

Competition Cams – Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (Part No.4818-8)

Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud

from

$24.99
Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud
View Product

Competition Cams – Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod (Part No.8310-1)

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod

from

$18.99
Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod
View Product

Competition Cams – Engine Valve Spring (Part No.914-1)

Engine Valve Spring

from

$15.99
Engine Valve Spring
View Product

Top Picks for 1998 Ford Explorer Performance Steering Products

Upgrade Ford Explorers with top-quality Performance Steering Products parts, including 5 OEM and aftermarket selections for your 1998 model.
show more show less

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

(3 reviews)
View Product

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

(1 reviews)
View Product

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More
View Product

Energy Suspension – Sway Bar Bushing Set (Part No.4.5155G)

Sway Bar Bushing Set

from

$58.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More
View Product

Energy Suspension – Sway Bar Bushing Set (Part No.4.5155R)

Sway Bar Bushing Set

from

$58.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More
View Product

In-Demand Performance Ignition Products for 1998 Ford Explorers

Select from 3 premium Performance Ignition Products parts for your 1998 Ford Explorer, with prices ranging from $34.49 to $204.99.
show more show less

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

(3 reviews)
View Product

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$34.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More
View Product

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More
View Product

Most Sold 1998 Ford Explorer Performance Distributors

Explore our best-selling Ford parts for the 1998 Explorer among 5 OEM and aftermarket options starting from $11.99.
show more show less

PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

D700700 Advance Spring Kit Flame-Thrower Billet Distributor

from

$22.99
Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:
  • Performance mechanical advance springs.
See More
View Product

PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

D660701 Rotor Flame-Thrower Billet Distributor

from

$19.99
Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:
  • Rotor for Flame-Thrower cast distributors
  • Replacement premium rotor with brass contact.
See More
View Product

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$17.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More
View Product

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

D4062 Flame-Thrower HEI Distributor Rotor Blue

from

$17.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More
View Product

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

D4260 Flame-Thrower Distributor Rotor HEI/EST Black

from

$11.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More
View Product

Top-Rated Performance and Racing Products Brands For Your 1998 Ford Explorer

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 Ford Explorers. Below you’ll find some of our best rated Performance and Racing Products from K&N, FEL-PRO Performance, and B & M, and more. Performance and Racing Products from these brands that fit a 1998 Explorer start at just $35.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1998 Ford Explorer Performance and Racing Products

When it comes to maintaining or upgrading your 1998 Ford Explorer, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1998 Ford Explorer. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $367.99. Plus, with over 5 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Cold Air Intake: Adds Up To 3 Horsepower, With Washable Air Filter
from $367.99
(3)
Cold Air Intake: Adds Up To 3 Horsepower, With Washable Air Filter
“Hello all @ KN, I just wanted to take a little time to contact KN and say thank you for such a great product. Since buying the complete air intake sy”
Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter
from $367.99
(2)
Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter
“Easy to install. Improved horsepower & mileage. Should have purchased it a long time ago.”

Popular FEL-PRO Performance 1998 Ford Explorer Performance and Racing Products

FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 Ford Explorer owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1998 Explorer, Advance Auto Parts carries a full inventory of 2 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $35.99 to $50.99, plus, with more than 5 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
Lower Intake Manifold Gasket Set: 11 Piece Set
from $35.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
“Great overall intake gasket!!”
Engine Valve Cover Gasket Set
from $50.99
(1)
Engine Valve Cover Gasket Set
“good”

FAQs for 1998 Ford Explorer Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1998 Ford Explorers?

Out of 72 Performance and Racing Products that fit 1998 Ford Explorers, the following parts are the top sellers:

What’s the price range for 1998 Ford Explorer Performance and Racing Products?

Performance and Racing Product prices for the 1998 Ford Explorer start at $5.99 and go up to $815.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1998 Ford Explorer?

The average price for Performance and Racing Products for the 1998 Ford Explorer is $193.07. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford Explorer model years?

Yes, we currently carry Performance and Racing Products for 33 model years of Ford Explorers between 1991 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1998 Ford Explorer?

The cheapest 1998 Ford Explorer Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1998 Ford Explorer?

Out of 109 reviews by customers, our 1998 Ford Explorer Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 Ford Explorer and their top-rated products:

What types of Performance and Racing Products do you sell for my 1998 Ford Explorer?

Can I get help with 1998 Ford Explorer Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford Explorer Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford Explorer Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

More Popular Parts for All Makes