1998 Dodge Ram 1500 Drive Shafts and Axles

Essential 1998 Dodge Ram 1500 Drive Shafts and Axles

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More

Crown Auto Jeep Replacmnt – Black (Part No.52070427AB)

Black

from

$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$145.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Dorman – Spindle Nut (Part No.K1002831732DOR)

Spindle Nut

from

$59.36
Spindle Nut

Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)

R1561Tv Rear Axle Bearing And Seal Kit

from

$88.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford and Dodge applications
  • Includes axle bearing and seal
  • Torrington Brand
  • Services one side
  • 2.985″ O.D.
  • 1.700″ I.D.
See More

Yukon Gear – Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub) (Part No.33266)

Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub)

from

$6.99
Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).

Product Features:
  • Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Snap Ring (Part No.33578)

Snap Ring

from

$19.99
Snap Ring

Driveworks – Wheel Bearing (Part No.S-RP-1561-FO)

Wheel Bearing

from

$31.99
Product Features:
  • Brand may vary by location
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-608)

Rear Drive Shaft: Adjustable

from

$686.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

National – National Driveshaft Center Support Bearing (Part No.HB-88528)

National Driveshaft Center Support Bearing

from

$106.99
National® Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Axle For Dodge Dana 44, 6.77", 33 Spline Outer Stub, With ABS Ring, 94 & Up (Part No.21154)

Replacement Axle For Dodge Dana 44, 6.77", 33 Spline Outer Stub, With ABS Ring, 94 & Up

from

$261.99
Yukon replacement axle for Dodge Dana 44, 6.77″, 33 spline outer stub, W/ABS ring, 94 & up. Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1994-1999 Dodge one ton front with vacuum disconnect
  • Outer stub
  • 33 spline
  • 6.77″ from end of splines to center of u-joint bore
  • Includes ABS ring
See More

Yukon Gear – Axle Stud , 2 5/16" X 9/16-18 (Part No.33556)

Axle Stud , 2 5/16" X 9/16-18

from

$5.99
AXLE STUD , 2 5/16″ X 9/16-18 .
See More

Yukon Gear – Left Hand Axle Bearing For Dodge Dana 44 Disconnect, 2.280" O.D. (Part No.18049)

Left Hand Axle Bearing For Dodge Dana 44 Disconnect, 2.280" O.D.

from

$51.99
Left hand axle bearing for Dodge Dana 44 disconnect, 2.280″ O.D.

Product Features:
  • Inner axle bearing
  • Fits Dana Spicer 44 with disconnect axles
  • Left hand
  • 2.280″ O.D.
See More

Yukon Gear – Outer Replacement Seal For Dana 44 And 60 Quick Disconnect Inner Axles (Part No.30103)

Outer Replacement Seal For Dana 44 And 60 Quick Disconnect Inner Axles

from

$25.99
Outer replacement seal for Dana 44 and 60 quick disconnect inner axles. 2.625″ OD.Yukon Mighty seal.

Product Features:
  • Outer axle seal
  • Fits Dana Spicer 44 and 60 with vacuum disconnect
  • 2.625″ O.D.
See More

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$78.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1984-2020
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: SQUARE FRAME
See More

Crown Auto Jeep Replacmnt – For Use With Dana 30, With Vacuum Diaphragm/ Gasket/ Hardware (Part No.4506116)

For Use With Dana 30, With Vacuum Diaphragm/ Gasket/ Hardware

from

$99.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Yukon Gear – Outer Stub Axle Nut Washer For Dodge Dana 44 & 60 (Part No.33491)

Outer Stub Axle Nut Washer For Dodge Dana 44 & 60

from

$7.99
Outer stub axle nut washer for Dodge Dana 44 & 60. This replaces Spicer part number 45523.

Product Features:
  • Outer stub axle nut washer for Dodge Dana 44 and 60
See More

Spartan – Drive Axle Assembly; Dodge 1500 P/U 09-10 Locker Axle (Part No.RAXP0167D)

Drive Axle Assembly; Dodge 1500 P/U 09-10 Locker Axle

from

$1824.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Spartan – Drive Axle Assembly; Dodge 1500 RWD Locker Axle (Part No.RAXP2003B)

Drive Axle Assembly; Dodge 1500 RWD Locker Axle

from

$1744.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Spartan – Drive Axle Assembly; Dodge 1500 4WD 02-05 Axle (Part No.RAXN2113A)

Drive Axle Assembly; Dodge 1500 4WD 02-05 Axle

from

$2384.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Spartan – Drive Axle Assembly; Dodge 1500 RWD Locker Axle (Part No.RAXP0121B)

Drive Axle Assembly; Dodge 1500 RWD Locker Axle

from

$1931.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

1998 Dodge Ram 1500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1998 Dodge Ram 1500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 77 different Drive Shafts and Axles in our inventory ranging from $4.99 to $1,781.99. That means you can find the exact parts or products you need to keep that 1998 Dodge Ram 1500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Dodge Ram 1500. National, Spicer, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1998 Dodge Ram 1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,605 reviews in this category, some of the top rated parts include Drive Axle Assembly; Dodge 1500 4WD 94-99 Axle with 4.5 stars and Ball Bearing with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1998 Dodge Ram 1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1998 Dodge Ram 1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Dodge Ram 1500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 1500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman Drive Shafts and Axles

We carry Dorman parts in our stock across Axle Vents categories, plus more. For a 1998 Dodge Ram 1500, our most popular Dorman Drive Shafts and Axles include:
Rear Axle Differential Vent
from $9.99
(6)
Rear Axle Differential Vent
Axle Vents

Top 1998 Dodge Ram 1500 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1998 Dodge Ram 1500. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $10.99
(19)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1998 Dodge Ram 1500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1998 Dodge Ram 1500?

Out of 77 Drive Shafts and Axles for the 1998 Dodge Ram 1500, the most popular in our inventory are:
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Bearings
from $15.99
(9)
Bearings
Drive Shaft Bearings

What are the top-rated 1998 Dodge Ram 1500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1998 Dodge Ram 1500 based on customer reviews/ratings are:
Drive Axle Assembly; Dodge 1500 4WD 94-99 Axle
from $1712.99
(39)
Drive Axle Assembly; Dodge 1500 4WD 94-99 Axle
“Fit and worked like it should.”
Ball Bearing
from $19.99
(5)
Ball Bearing
“Easy Installation, Exact Fit”
Bearings
from $10.49
(4)
Bearings
“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”