1998 Chevrolet Malibu Air Intakes
More 1998 Chevrolet Malibu Air Intakes Categories
If you’re looking for an original Air Intakes replacement for a 1998 Chevrolet Malibu, you can search through our selection below. You’ll also find aftermarket and OEM Air Intakes to meet your needs.
Essential 1998 Chevrolet Malibu Air Intakes
Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10299-01)
from
$28.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
- It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
- Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)
from
$99.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90565)
from
$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Carquest Premium – Throttle Position Sensor w/ Hardware (Part No.ECC1089)
from
$259.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Throttle Position Sensor (Part No.ECC1245)
from
$70.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Throttle Position Sensor (Part No.SS10382)
from
$63.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi sensors are built to meet or exceed OE requirements and testing
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Air Charge Temperature Sensor (Part No.31A1016)
from
$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Carquest Premium – Air Charge Temperature Sensor (Part No.ECC1447)
from
$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Body Bolt With Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)
from
$1.29
These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
- 1″ Long
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
ARP Auto Racing – For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers (Part No.435-2101)
from
$59.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Wont Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
GM Genuine Parts – Coolant Pipe O-Ring (Part No.24504709)
from
$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Mahle – FI Throttle Body Mou (Part No.C7001291603MAH)
from
$4.17
FI Throttle Body Mou
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61685)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Each gasket set is built to meet or exceed all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61309)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61456)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.40-5083)
from
$22.99
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61520)
from
$13.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60983)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61466)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1998 Chevrolet Malibu Air Intakes Categories
1998 Chevrolet Malibu Air Intakes
You count on your 1998 Chevrolet Malibu to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 20 Air Intakes ranging in price from $1.29 to $104.99, you’re sure to find everything you need for your 1998 Chevrolet Malibu.
Brands matter. If you want to shop a specific Air Intakes brand, we stock 9 different brands like Dorman, Carquest Premium, and NTK. 1998 Chevrolet Malibu Air Intakes start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 94 extensive product reviews on 1998 Chevrolet Malibu Air Intakes. Some of the top-rated Air Intakes products we carry are Fuel Injection Throttle Body Mounting Gasket with 5.0 stars and Throttle Position Sensor with 5.0 stars.
Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1998 Chevrolet Malibu below to get started!
Top-Rated Air Intakes Brands For Your 1998 Chevrolet Malibu
Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Chevrolet Malibu running right for years to come. In our inventory you’ll find brands like Dorman, Carquest Premium, NTK, and even more.
Popular ACDelco Air Intakes
You’ll find popular ACDelco brand products across Throttle Bodies & Carb Parts. All are waiting to get your 1998 Chevrolet Malibu back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated Felpro Air Intakes
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Air Intakes for your 1998 Chevrolet Malibu, and some of our most reviewed Felpro parts include:
FAQs for 1998 Chevrolet Malibu Air Intakes
What are the most purchased Air Intakes for the 1998 Chevrolet Malibu?
Out of 20 Air Intakes for the 1998 Chevrolet Malibu, the most popular in our inventory are:
What are the top-rated 1998 Chevrolet Malibu Air Intakes?
Top-rated Air Intakes for your 1998 Chevrolet Malibu based on customer reviews/ratings are:
from
$5.49
(1)
Fuel Injection Throttle Body Mounting Gasket
“These gaskets are very thin. Works best if 2 are bought and use high temperature rtv to seal together for more air tight fit.”
from
$63.99
(1)
Throttle Position Sensor
“Recently I plugged in my OBD-II scanner and looked at the live data. When I put my throttle pedal all the way to the floor, it read roughly 80%. I cou”
