1997 Jeep Wrangler Clutch Systems
More 1997 Jeep Wrangler Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1997 Jeep Wrangler, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1997 Jeep Wrangler Clutch Systems
ATP – M/T FLYWHEEL (Part No.Z-305)
from
$209.99
M/T FLYWHEEL
ATP – Automatic Transmission Flex Plate (Part No.Z-205)
from
$101.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – FLYWHEEL SHIM (Part No.TS-3)
from
$24.99
FLYWHEEL SHIM
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.01-034)
from
$227.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Sachs – Super Set Clutch Kit (Part No.I2030264754SAC)
from
$222.74
As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.
Product Features:
See More
Product Features:
- OE Quality and direct fit application.
- Original Equipment Supplier
- Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
- Most complete clutch kit line offering in the industry
- Unmatched Asian, Domestic and European coverage
- Exclusive parts not available through other suppliers
- Complete range of complimentary parts and upgrades
LuK – Clutch Master Cylinder (Part No.LMC357)
from
$67.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Master Cylinder (Part No.I3000835971LUK)
from
$89.61
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Richmond Gear – Differential Cross Shaft (Part No.CSPD44)
from
$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Omix – Clutch Disc (Part No.16905.06)
from
$169.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- 10.5 in.
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Bellhsng (Part No.S-52104000)
from
$276.99
Bellhsng
Driveworks – Clutch Release Bearing (Part No.S-FC-69907)
Dorman – Help – Clutch Pilot Bearing (Part No.14657)
from
$12.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Clutch Pilot Bearing .596 In. x .829 In. Type E, Length .586 In. (sold by each) (Part No.690-044)
from
$3.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Omix – Flywheel Ring Gear (Part No.16911.03)
from
$45.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Use With 2.5L
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Flywheel Ring Gear (Part No.16911.06)
from
$51.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Use With AMC V8; 4.2L Or 4..0L
- OE Style
- Direct Fit
- Limited 5 Year Warranty
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-509)
from
$28.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Omix – Clutch Slave Cylinder (Part No.16909.08)
from
$115.99
Are your clutch master or slave cylinders leaking? Over time the seals will deteriorate. It’s always a good idea to replace both the clutch master and slave cylinder at the same time. Usually if one is bad, the other is close behind. Save yourself a roads
Product Features:
See More
Product Features:
- Plastic Body
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Slave Cylinder (Part No.16909.03)
from
$207.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- Hydraulic
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dorman – Clutch Master/Slave (Part No.I3015828258DOR)
from
$219.51
Clutch Master/Slave
Omix – Clutch Cover (Part No.16904.12)
from
$177.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- For 10.5 in. Clutch
- OE Style
- Direct Fit
- Limited 5 Year Warranty
LUK – Clutch Slave Cylinder (Part No.I3010836349LUK)
from
$218.39
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Multi Purpose Bearing (Part No.619001)
from
$161.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Sachs – Clutch Release Bearing (Part No.I2020182468SAC)
from
$64.41
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Simplified assembly
- Integrated functionality
- Design flexibility
National – Multi Purpose Bearing (Part No.614093)
from
$57.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Valeo – Pressure Plate and D (Part No.I20021116533VAL)
from
$221.11
Pressure Plate and D
Omix – Clutch Pressure Plate (Part No.16904.09)
from
$142.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- For 2.5L
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Cover (Part No.16904.18)
from
$184.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- For 2.4L
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Popular 1997 Jeep Wrangler Clutch Systems Categories
1997 Jeep Wrangler Clutch Systems
You count on your 1997 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 31 Clutch Systems ranging in price from $12.99 to $276.99, you’re sure to find everything you need for your 1997 Jeep Wrangler.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 8 different brands like LuK, National, and ATP. 1997 Jeep Wrangler Clutch Systems start as low as $12.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 39 extensive product reviews on 1997 Jeep Wrangler Clutch Systems. Some of the top-rated Clutch Systems products we carry are Automatic Transmission Flex Plate with 1.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1997 Jeep Wrangler below to get started!
Top-Rated Clutch Systems Brands For Your 1997 Jeep Wrangler
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like LuK, National, ATP, and even more.
Popular LuK Clutch Systems
You’ll find popular LuK brand products across Clutch Kits. All are waiting to get your 1997 Jeep Wrangler back on the road. Some of the top-rated LuK products in these categories are:
from
$163.99
(3)
Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline
Clutch Sets
Top-Rated National Clutch Systems
If National are what you’re looking for, our inventory holds plenty. We stock National brand Clutch Systems for your 1997 Jeep Wrangler, and some of our most reviewed National parts include:
FAQs for 1997 Jeep Wrangler Clutch Systems
What are the most purchased Clutch Systems for the 1997 Jeep Wrangler?
Out of 31 Clutch Systems for the 1997 Jeep Wrangler, the most popular in our inventory are:
from
$152.99
This product is not rated
LuK Original Equipment Quality Replacement CLUTCH KIT
Clutch Sets
What are the top-rated 1997 Jeep Wrangler Clutch Systems?
Top-rated Clutch Systems for your 1997 Jeep Wrangler based on customer reviews/ratings are:
from
$139.99
(1)
Automatic Transmission Flex Plate
“Wrong information not for Manual Trans, it’s a Flexplate not a Flywheel”
