from

$3.99

TCaseShiftForkInsert

from

$33.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$45.99

AT SPEED SENSOR

from

$16.99

Product Features:

Brand may vary by location

from

$6.99

AT CONTR SHAFT SEAL

from

$19.49

This automatic transmission shift indicator cable bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this automatic transmission shift indicator cable bracket matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$188.99

AT CONTR SOLENOID

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$11.29

This automatic transmission overdrive button kit matches the original parts to repair a missing or damaged overdrive button on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this automatic transmission overdrive button kit is designed to match the original components required to repair a missing or damaged overdrive button on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing, damaged or failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$74.05

Designed from high-quality materials for sustained reliability, Dorman’s Transmission Range Sensor ensures that the correct gear selection input is provided to the electronic control unit. Replacement restores your ability to start the vehicle, and helps ensure smooth shifting.

Product Features:

Durable wire loom protects wiring from oil and heat damage
Connector features weather-pack seal for effective corrosion prevention
Direct replacement for a proper fit
Replacement restores reverse lights to proper operation (where applicable)

from

$14.79

Product Features:

Transmission line fitting kit
GM, Jeep; 5/8″-18 inverted flare
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$12.73

Output Shaft Seal

from

$8.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.99

AT EXT HOUSING SEAL

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$6.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$14.79

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$297.99

One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Include steels, frictions, gaskets, and filter
Includes Band and Modulator (if applicable)

from

$26.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 90-02; MAZDA 91-97;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1990-2002
Weight approx: 4 Lbs
MOUNT HOLES ON CENTER: 5.5 INCH /139.7 MM
STUDS ON CENTER: 3.15 INCH/80.00 MM
HEIGHT: 2.94 INCH/74.68 MM
NOTE: INTERLOCK

from

$12.29

This clutch pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$142.99

Shift Solenoid

from

$25.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$14.99

A/T FLYWHEEL BOLT

from

$97.75

Starter Clutch Inter

from

$55.99

This automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications
Restores functionality – this tube is made to fit and fully restore part functionality after the original tube fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience