1997 Ford F53 Drivetrains

Essential Drivetrains for 1997 Ford F53s

FAG US – CONE (Part No.KM86649)

CONE

from

$18.99
CONE

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.331-10)

Universal Joint Strap Kit

from

$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 330 & 331
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 3/4″ cap screws
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spicer – Universal Joint (Part No.5-188X)

Universal Joint

from

$41.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
See More

Dorman – Axle Spindle Nut (Part No.K4030212888DOR)

Axle Spindle Nut

from

$3.93
Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

National – Bearings (Part No.3720)

Bearings

from

$11.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Felpro – Differential Cover Gasket (Part No.RDS 55447)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Differential Clutch Kit (Part No.697-417)

Differential Clutch Kit

from

$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Taper Bearing Cup (Part No.S-15245)

Taper Bearing Cup

from

$5.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Differential Ring And Pinion Set (Part No.697-316)

Differential Ring And Pinion Set

from

$316.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
  • Effective fix – eliminates grinding and whining from failed original bearings.
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Transfer Case Gasket (Part No.J71331098749DOR)

Transfer Case Gasket

from

$13.10
Transfer Case Gasket

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Pro-King – Differential Rebuild Kit (Part No.718B004)

Differential Rebuild Kit

from

$381.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • Contains the highest quality Japanese bearings
See More

FAG US – CONE (Part No.KLM102949)

CONE

from

$21.99
CONE

National – Shaft Repair Sleeve (Part No.99253)

Shaft Repair Sleeve

from

$47.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

FAG US – SHAFT SEAL (Part No.SS2713)

SHAFT SEAL

from

$17.29
SHAFT SEAL

National – Multi Purpose Seal (Part No.4525V)

Multi Purpose Seal

from

$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Differential Pinion Seal (Part No.S-4525-V)

Differential Pinion Seal

from

$19.79
Product Features:
  • Brand may vary by location
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6107)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$122.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 03-15;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2003-2015
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: HORSESHOE
  • WITH PLATE
  • WITHOUT STUDS
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$17.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.7680 INCH / 45 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 7.62 INCH / 194 MM
See More

National – Multi Purpose Bearing (Part No.HB-88508-AA)

Multi Purpose Bearing

from

$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Bearing (Part No.HB-88108-FD)

Multi Purpose Bearing

from

$69.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM807010)

Bearings

from

$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.55437)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Upgrade your 1997 Ford F53 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1997 Ford F53, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your F53 functioning at its best. At Advance Auto Parts, we offer a wide selection of 72 Drivetrains for the 1997 Ford F53, designed to meet your needs without breaking the bank. From Universal Joint replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1997 Ford F53 at great prices. Our Drivetrains inventory for this model ranges from just $3.93 to $1,566.99, with an average price of $76.40. Our 72 Drivetrains in stock come from 14 trusted brands, so you’re sure to find the right part for your 1997 Ford F53 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford F53, we stock popular OEM and aftermarket Drivetrains from top names like Spicer, Moog, National, and more. Spicer Drivetrains start at just $40.99 and boast an impressive 5 stars average rating from customers. Moog and National also bring quality to the table, with Drivetrains available starting at $9.99, and at an average 4 stars rating. With 133 customer reviews and counting, our 1997 Ford F53 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1997 Ford F53 is always ready to roll. We’re committed to providing you with everything you need to keep your F53 in top shape, all in one place. Start shopping confidently below for your 1997 Ford F53!

Best-Selling Universal Joints for 1997 Ford F53s

Enhance the driving experience in your Ford with 9 quality Universal Joint components, starting at $7.19.

MOOG Driveline Products – Universal Joint Strap Kit (Part No.331-10)

Universal Joint Strap Kit

from

$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 330 & 331
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 3/4″ cap screws
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.295)

Greaseable Super Strength Universal Joint

from

$55.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.330)

Greaseable Premium Universal Joint

from

$28.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Driveworks – Universal Joint (Part No.DW-330)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Spicer – Universal Joint (Part No.5-188X)

Universal Joint

from

$41.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.296)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Spicer – Universal Joint (Part No.SPL55X)

Universal Joint

from

$68.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Spicer – Universal Joint (Part No.SPL55-1X)

Universal Joint

from

$90.99
Universal Joint

Neapco – Universal Joint (Part No.2-0054)

Universal Joint

from

$7.19
Universal Joint
See More

Most Popular 1997 Ford F53 Drive Shafts and Axles

Customize your Ford with 15 Drive Shafts and Axles products like Axle Shaft Seals, Axle Shaft Universal Joints, and Center Support Bearings, all priced under $58.99.

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Bearing (Part No.HB-88508-AA)

Multi Purpose Bearing

from

$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6053)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$39.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 60-02; DODGE 64-66; FORD 75-15; GMC 60-02;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1960-2015
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • NO STUDS
See More

Driveworks – Oil Seal (Part No.S-225010)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6048)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$46.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-96; DODGE 71-81; FORD 75-98; GMC 79-96; INTL 57-02; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2013
  • Weight approx: 6 Lbs
  • BEARING ID / BORE: 1.9685 INCH / 50 MM
  • CENTERLINE: 2.80 INCH / 71 MM
  • MOUNT WIDTH: 7.62 INCH / 194 MM
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6049)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$37.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-90; DODGE 78-81; FORD 75-98; GMC 79-90; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2018
  • Weight approx: 8 Lbs
  • BEARING ID / BORE: 2.3622 INCH / 60 MM
  • CENTERLINE: 3.37 INCH / 86 MM
  • MOUNT WIDTH: 8.62 INCH / 219 MM
See More

Dorman – Spindle Nut (Part No.K1002831650DOR)

Spindle Nut

from

$17.26
Spindle Nut

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$17.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.7680 INCH / 45 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 7.62 INCH / 194 MM
See More

Spicer – Universal Joint (Part No.5-1410-1X)

Universal Joint

from

$55.99
Universal Joint

FAG US – HANGER BEARING (Part No.CH0158)

HANGER BEARING

from

$44.49
HANGER BEARING

Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-AA)

Drive Shaft Center Support

from

$29.49
Product Features:
  • Brand may vary by location
See More

Dorman – Axle Spindle Nut (Part No.K4030212888DOR)

Axle Spindle Nut

from

$3.93
Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

Top Picks for 1997 Ford F53 Transfer Cases

Upgrade Ford F53s with top-quality Transfer Cases parts, including 9 OEM and aftermarket selections for your 1997 model.

Driveworks – Taper Bearing Cup (Part No.S-15245)

Taper Bearing Cup

from

$5.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.15101)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Transfer Case Gasket (Part No.917-522)

Transfer Case Gasket

from

$10.79
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications.
  • Effective fix – restores a tight seal in the transfer case after original gasket fails.
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

FAG US – BEARING (Part No.6208-C3)

BEARING

from

$24.79
BEARING

FAG US – BEARING (Part No.6207)

BEARING

from

$15.49
BEARING

Driveworks – Tapered Roller Bearing (Part No.S-3920)

Tapered Roller Bearing

from

$14.79
Product Features:
  • Brand may vary by location
See More

Dorman – Transfer Case Gasket (Part No.J71331098749DOR)

Transfer Case Gasket

from

$13.10
Transfer Case Gasket

USA Standard Gear – TCase Thrust Washer (Part No.74506)

TCase Thrust Washer

from

$5.99
TCase Thrust Washer

In-Demand Differentials for 1997 Ford F53s

Select from 39 premium Differentials parts for your 1997 Ford F53, with prices ranging from $8.74 to $1,566.99.

Felpro – Differential Cover Gasket (Part No.RDS 55447)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Set (Part No.S-A-38)

Taper Bearing Set

from

$13.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.4525V)

Multi Purpose Seal

from

$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.453X)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM807046)

Bearings

from

$59.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM807010)

Bearings

from

$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99253)

Shaft Repair Sleeve

from

$47.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.28521)

Bearings

from

$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Differential Ring And Pinion Set (Part No.697-316)

Differential Ring And Pinion Set

from

$316.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
  • Effective fix – eliminates grinding and whining from failed original bearings.
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Differential Ring And Pinion Set (Part No.697-347)

Differential Ring And Pinion Set

from

$249.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
  • Effective fix – eliminates grinding and whining from failed original bearings.
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Differential Clutch Kit (Part No.697-417)

Differential Clutch Kit

from

$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Dorman – Premium Ring And Pinion Master Bearing And Installation Kit (Part No.797-112)

Premium Ring And Pinion Master Bearing And Installation Kit

from

$403.99
If you’re repairing or rebuilding a front or rear differential and want the best performance and longevity from the bearings being replaced, choose this premium differential kit. It includes high-precision bearings manufactured to tighter tolerances and engineered to last longer than common lower-grade bearings that have more backlash when subjected to the torque generated within the differential. This convenient kit also saves the time needed to source individual components. Check the product attributes and fitment details to select the correct premium differential kit for your application.

Product Features:
  • Increased reliability – the premium bearings in this kit are manufactured to exacting tolerances and specifications from high quality materials to help ensure optimal performance
  • Application-specific – check the product attributes and fitment details to choose the correct kit for your application
See More

Dorman – Premium Ring And Pinion Master Bearing And Installation Kit (Part No.797-106)

Premium Ring And Pinion Master Bearing And Installation Kit

from

$353.99
If you’re repairing or rebuilding a front or rear differential and want the best performance and longevity from the bearings being replaced, choose this premium differential kit. It includes high-precision bearings manufactured to tighter tolerances and engineered to last longer than common lower-grade bearings that have more backlash when subjected to the torque generated within the differential. This convenient kit also saves the time needed to source individual components. Check the product attributes and fitment details to select the correct premium differential kit for your application.

Product Features:
  • Ideal solution – this premium differential bearing kit features high-precision bearings to help ensure longer bearing life, prevent backlash, and restore proper differential operation
  • Application-specific – check the product attributes and fitment details to choose the correct kit for your application
See More

Dorman – Differential Ring And Pinion Set (Part No.697-315)

Differential Ring And Pinion Set

from

$298.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
  • Effective fix – eliminates grinding and whining from failed original bearings.
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-106)

Ring and Pinion Bearing Installation Kit

from

$267.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:
  • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
  • Related repair – smart to have on hand when installing a differential ring and pinion.
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

FAG US – CONE (Part No.KJLM506849-A)

CONE

from

$51.99
CONE

Pro-King – Differential Bearing Cone (Part No.745A255)

Differential Bearing Cone

from

$47.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-807046)

Tapered Roller Bearing

from

$42.99
Product Features:
  • Brand may vary by location
See More

SKF – Diff. Carrier Bearin (Part No.J7016820463SKF)

Diff. Carrier Bearin

from

$38.33
Diff. Carrier Bearin

Pro-King – Differential Bearing Cone (Part No.764A270)

Differential Bearing Cone

from

$35.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT47)

TAPERED ROLLER BEARI

from

$28.99
TAPERED ROLLER BEARI

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

FAG US – CONE (Part No.KLM102949)

CONE

from

$21.99
CONE

Pro-King – Differential Bearing Cup (Part No.764A271)

Differential Bearing Cup

from

$21.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

FAG US – SHAFT SEAL (Part No.SS2852)

SHAFT SEAL

from

$20.99
SHAFT SEAL

Pro-King – Differential Bearing Cone (Part No.742G255)

Differential Bearing Cone

from

$19.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Differential Pinion Seal (Part No.S-4525-V)

Differential Pinion Seal

from

$19.79
Product Features:
  • Brand may vary by location
See More

Pro-King – Differential Bearing Cup (Part No.764A256)

Differential Bearing Cup

from

$18.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-807010)

Tapered Roller Bearing

from

$17.29
Product Features:
  • Brand may vary by location
See More

SKF – Pinion Seal (Part No.J7010247045SKF)

Pinion Seal

from

$11.48
Pinion Seal

Driveworks – Tapered Roller Bearing (Part No.S-453-X)

Tapered Roller Bearing

from

$9.49
Product Features:
  • Brand may vary by location
See More

Pro-King – Differential Bearing Cup (Part No.742G256)

Differential Bearing Cup

from

$8.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

FAG US – CUP (Part No.15245)

CUP

from

$8.89
CUP

Autopart International Inc – Differential Pinion (Part No.J70211949937API)

Differential Pinion

from

$8.74
Differential Pinion

Top-Rated Drivetrains Brands For Your 1997 Ford F53

Shop for the best-rated brands offering Drivetrains and other products for your 1997 Ford F53s. Below you’ll find some of our best rated Drivetrains from Spicer, Moog, and National, and more. Drivetrains from these brands that fit a 1997 F53 start at just $9.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Spicer 1997 Ford F53 Drivetrains

When it comes to maintaining or upgrading your 1997 Ford F53, using quality Drivetrains is essential to ensure durability and a perfect fit. Spicer ticks all of those boxes. We offer a wide selection of Spicer Drivetrains, specifically designed for the 1997 Ford F53. With over 6 Spicer brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $40.99, with an average price of just $58.49. Plus, with over 11 customer reviews and an average rating of 5 stars, you can trust that our Spicer Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Universal Joint
from
$68.99
This product is not rated

Universal Joint

“”

Universal Joint
from
$41.99
This product is not rated

Universal Joint

“”

Universal Joint
from
$90.99
This product is not rated

Universal Joint

“”

Popular Moog 1997 Ford F53 Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1997 Ford F53 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1997 F53, Advance Auto Parts carries a full inventory of 4 Moog Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Moog Drivetrains range from $9.99 to $55.99, plus, with more than 69 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

Greaseable Super Strength Universal Joint
from
$55.99

(39)

Greaseable Super Strength Universal Joint

“u joint works well.”

Non-Greaseable Super Strength Universal Joint
from
$32.99
This product is not rated

Non-Greaseable Super Strength Universal Joint

“”

Universal Joint Strap Kit
from
$9.99

(10)

Universal Joint Strap Kit

“Replaced my factory junk with this kit. Now I will be able to work on it in the future.”

FAQs for 1997 Ford F53 Drivetrains

Which Drivetrains are best-sellers for 1997 Ford F53s?

Out of 72 Drivetrains that fit 1997 Ford F53s, the following parts are the top sellers:

What’s the price range for 1997 Ford F53 Drivetrains?

Drivetrain prices for the 1997 Ford F53 start at $3.93 and go up to $1,566.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1997 Ford F53?

The average price for Drivetrains for the 1997 Ford F53 is $76.40. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford F53 model years?

Yes, we currently carry Drivetrains for 28 model years of Ford F53s between 1988 and 2019. Drivetrains are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Drivetrains for my 1997 Ford F53?

The cheapest 1997 Ford F53 Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 1997 Ford F53?

Out of 133 reviews by customers, our 1997 Ford F53 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1997 Ford F53 and their top-rated products:

What types of Drivetrains do you sell for my 1997 Ford F53?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1997 Ford F53:

Can I get help with 1997 Ford F53 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford F53 Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford F53 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.